Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Apurva Nandan <a-nandan@ti.com>
To:     Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 0/2] arm64: dts: ti: k3-j72xx-main: Switch MAIN R5F clusters to Split-mode
Date:   Wed, 29 Mar 2023 12:07:26 +0530
Message-ID: <20230329063728.14126-1-a-nandan@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

J721E and J7200 SoCs have two R5F clusters in the MAIN domain, and both
of these are configured for LockStep mode at the moment. Switch both of
these R5F clusters to Split mode by default to maximize the number of
R5F cores. The MCU R5F cluster continues to be in the preferred LockStep
mode.

Note that this configuration is the default for remoteproc mode (kernel
driver boots the R5F processors). These will be overridden for early-
booted remoteprocs through the corresponding IPC-only support in the K3
R5F remoteproc driver.

Suman Anna (2):
  arm64: dts: ti: k3-j721e-main: Switch MAIN R5F clusters to Split-mode
  arm64: dts: ti: k3-j7200-main: Switch MAIN R5F cluster to Split-mode

 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

-- 
2.34.1