Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754533AbXIWTWs (ORCPT ); Sun, 23 Sep 2007 15:22:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752124AbXIWTWl (ORCPT ); Sun, 23 Sep 2007 15:22:41 -0400 Received: from mu-out-0910.google.com ([209.85.134.185]:11297 "EHLO mu-out-0910.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752106AbXIWTWi (ORCPT ); Sun, 23 Sep 2007 15:22:38 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:from:organization:to:subject:date:user-agent:cc:references:in-reply-to:mime-version:content-type:message-id; b=lLkb8qHfxfDoOIX8/scIxLFW069H2xS9zcjDGV3fFZbduW/tgFLQ2Kw+WnGXN6fdsJ+PZRRF0AhR51gEV/5+YEwhCoBlBW912r83x6K48heyuC6R91CgQJuvSH0R8jpwjYyswRRgDIMzjVStT2gMJx2MmOxpADLdzneEgRt8fWI= From: Mihai =?utf-8?q?Don=C8=9Bu?= Organization: Home To: "Rafael J. Wysocki" Subject: Re: 2.6.23-rc7 + radeonfb/s2ram Date: Sun, 23 Sep 2007 22:22:28 +0300 User-Agent: KMail/1.9.7 Cc: Benjamin Herrenschmidt , linux-kernel@vger.kernel.org, Linus Torvalds References: <200709220828.00078.mihai.dontu@gmail.com> <200709232131.02348.mihai.dontu@gmail.com> <200709232118.09884.rjw@sisk.pl> In-Reply-To: <200709232118.09884.rjw@sisk.pl> MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_1zr9G8iKcDj3ISi" Message-Id: <200709232222.29066.mihai.dontu@gmail.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 40975 Lines: 650 --Boundary-00=_1zr9G8iKcDj3ISi Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Content-Disposition: inline On Sunday 23 September 2007, Rafael J. Wysocki wrote: > On Sunday, 23 September 2007 20:31, Mihai Donțu wrote: > > On Sunday 23 September 2007, Mihai Donțu wrote: > > > I'll to do a full cleanup and start all over. I'm going to nail this thing down if > > > it's the last thing I do! (so help me God) :) > > > > Found it! > > > > The problem was "Framebuffer Console support". It was enabled by default in older > > configs (like 2.6.22.7) but I think someone noticed this was bad and put it to > > default N in newer (2.6.23-rc7); and since I reused the .config from 2.6.21.3 ... > > > > So there, if one wants "ATI Radeon display support" on Radeon XPRESS 200M with > > X using radeon_drv.so, *should* put "Framebuffer Console support" to N (if it's > > not already). > > > > Now all I have to do is figure out what's the equivalent of "vga=791" on the new > > kernel (default text console looks really bad on my laptop). > > > > Sorry for all the noise (and spam), > > No, this actually is valuable information, thanks for it. :-) > > [I have missed your first post, sorry for that.] Don't worry. Now, one last update (I've just ran into it): I was preparing my laptop (to brag tomorrow with my new s2ram thinggie) when I noticed that after powering up from a suspend-to-ram, X doesn't like radeonfb working behind it's back, as a result it goes crazy (corrupted pixmaps and such). I should have tested these two together :| Bottom line: no radeonfb for me :( at least, not now; but I have to be honest with you: I don't see what commit dd1447134454b169d5ae353aceb93f2368db8547 brought new into the picture. The previous radeonfb worked just great, but then, again, maybe I'm not using the console at it's full power :) I have attached the dmesg after power up. Thanks, (last post today, I swear to God!) -- Mihai Donțu --Boundary-00=_1zr9G8iKcDj3ISi Content-Type: text/plain; charset="utf-8"; name="dmesg-radeonfb.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-radeonfb.txt" [ 0.000000] Linux version 2.6.23-rc7 (root@mdontu-l) (gcc version 4.1.2 (Gentoo 4.1.2)) #16 PREEMPT Sun Sep 23 21:45:39 EEST 2007 [ 0.000000] Command line: nohz=on root=/dev/sda7 libata.noacpi=0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fd0000 (usable) [ 0.000000] BIOS-e820: 0000000037fd0000 - 0000000037fefc00 (reserved) [ 0.000000] BIOS-e820: 0000000037fefc00 - 0000000037ffb000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ffb000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FE270, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 37FEFC84, 0034 (r1 HP 0944 22110520 HP 1) [ 0.000000] ACPI: FACP 37FEFC00, 0084 (r2 HP 0944 2 HP 1) [ 0.000000] ACPI: DSDT 37FEFD50, 7489 (r1 HP SB400 10000 MSFT 100000E) [ 0.000000] ACPI: FACS 37FFAE80, 0040 [ 0.000000] ACPI: APIC 37FEFCB8, 005A (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: MCFG 37FEFD14, 003C (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: SSDT 37FF71D9, 0382 (r1 HP HPQPpc 1001 MSFT 100000E) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 229328) 1 entries of 256 used [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 229328 [ 0.000000] On node 0 totalpages: 229231 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1911 pages reserved [ 0.000000] DMA zone: 2032 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3079 pages used for memmap [ 0.000000] DMA32 zone: 222153 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfec01000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] Built 1 zonelists in Zone order. Total pages: 224185 [ 0.000000] Kernel command line: nohz=on root=/dev/sda7 libata.noacpi=0 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 12.674960] time.c: Detected 2194.591 MHz processor. [ 12.676723] Console: colour VGA+ 80x25 [ 12.676726] console [tty0] enabled [ 12.680404] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 12.681426] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 12.696604] Memory: 894868k/917312k available (4178k kernel code, 21796k reserved, 1783k data, 232k init) [ 12.755828] Calibrating delay using timer specific routine.. 4391.82 BogoMIPS (lpj=2195914) [ 12.755966] Mount-cache hash table entries: 256 [ 12.756164] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 12.756211] CPU: L2 Cache: 1024K (64 bytes/line) [ 12.756267] CPU: AMD Turion(tm) 64 Mobile ML-40 stepping 02 [ 12.756399] ACPI: Core revision 20070126 [ 12.802447] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 12.812490] Using local APIC timer interrupts. [ 12.858042] result 12469271 [ 12.858085] Detected 12.469 MHz APIC timer. [ 12.858886] NET: Registered protocol family 16 [ 12.859104] No dock devices found. [ 12.859210] ACPI: bus type pci registered [ 12.864287] PCI: Using MMCONFIG at e0000000 - efffffff [ 12.864378] PCI: No mmconfig possible on device 00:18 [ 12.867424] ACPI: EC: Look up EC in DSDT [ 12.867510] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 12.884599] ACPI: Interpreter enabled [ 12.884649] ACPI: (supports S0 S3) [ 12.884806] ACPI: Using IOAPIC for interrupt routing [ 12.892180] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 12.892270] ACPI: PCI Root Bridge [C047] (0000:00) [ 12.893712] PCI: Transparent bridge - 0000:00:14.4 [ 12.893834] ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT] [ 12.894031] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT] [ 12.894117] ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT] [ 12.906699] ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled. [ 12.907084] ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled. [ 12.907467] ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled. [ 12.907858] ACPI: PCI Interrupt Link [C0F3] (IRQs 10 11) *0, disabled. [ 12.908242] ACPI: PCI Interrupt Link [C0F4] (IRQs 10 11) *0, disabled. [ 12.908629] ACPI: PCI Interrupt Link [C0F5] (IRQs 9) *0, disabled. [ 12.908976] ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *0, disabled. [ 12.909367] ACPI: PCI Interrupt Link [C0F7] (IRQs *10 11) [ 12.909670] ACPI: Power Resource [C1CF] (off) [ 12.909865] ACPI: Power Resource [C1B7] (on) [ 12.909947] ACPI: Power Resource [C1C7] (on) [ 12.910072] ACPI: Power Resource [C26C] (off) [ 12.910189] ACPI: Power Resource [C26D] (off) [ 12.910305] ACPI: Power Resource [C26E] (off) [ 12.910423] ACPI: Power Resource [C26F] (off) [ 12.910496] Linux Plug and Play Support v0.97 (c) Adam Belay [ 12.910561] pnp: PnP ACPI init [ 12.910613] ACPI: bus type pnp registered [ 12.916735] pnp: PnP ACPI: found 12 devices [ 12.916780] ACPI: ACPI bus type pnp unregistered [ 12.917006] SCSI subsystem initialized [ 12.917067] libata version 2.21 loaded. [ 12.917162] usbcore: registered new interface driver usbfs [ 12.917249] usbcore: registered new interface driver hub [ 12.917324] usbcore: registered new device driver usb [ 12.917527] PCI: Using ACPI for IRQ routing [ 12.917571] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 12.917631] PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0 [ 12.917677] PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0 [ 12.917723] PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0 [ 12.917769] PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0 [ 12.917814] PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0 [ 12.917860] PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0 [ 12.920593] Bluetooth: Core ver 2.11 [ 12.920683] NET: Registered protocol family 31 [ 12.920728] Bluetooth: HCI device and connection manager initialized [ 12.920775] Bluetooth: HCI socket layer initialized [ 12.920820] NET: Registered protocol family 8 [ 12.920863] NET: Registered protocol family 20 [ 12.921579] Time: tsc clocksource has been installed. [ 12.923598] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 12.923644] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 12.923691] pnp: 00:00: iomem range 0x100000-0x37ffffff could not be reserved [ 12.923742] pnp: 00:09: ioport range 0x40b-0x40b has been reserved [ 12.923787] pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 12.923833] pnp: 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 12.923880] pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved [ 12.923932] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 12.923985] pnp: 00:0a: ioport range 0x8000-0x802f has been reserved [ 12.924031] pnp: 00:0a: ioport range 0x8100-0x811f has been reserved [ 12.924077] pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved [ 12.924128] pnp: 00:0a: iomem range 0xfec00000-0xfec000ff has been reserved [ 12.924177] pnp: 00:0b: iomem range 0xcf000-0xdffff has been reserved [ 12.924223] pnp: 00:0b: iomem range 0x38000000-0x3fffffff could not be reserved [ 12.924274] pnp: 00:0b: iomem range 0xfec01000-0xfec01fff could not be reserved [ 12.924566] PCI: Bridge: 0000:00:01.0 [ 12.924614] IO window: 2000-2fff [ 12.924658] MEM window: d0400000-d07fffff [ 12.924702] PREFETCH window: c0000000-cfffffff [ 12.924746] PCI: Bridge: 0000:00:04.0 [ 12.924790] IO window: disabled. [ 12.924833] MEM window: disabled. [ 12.924876] PREFETCH window: disabled. [ 12.924920] PCI: Bridge: 0000:00:05.0 [ 12.924963] IO window: disabled. [ 12.925006] MEM window: disabled. [ 12.925049] PREFETCH window: disabled. [ 12.925095] PCI: Bus 3, cardbus bridge: 0000:02:04.0 [ 12.925139] IO window: 00001000-000010ff [ 12.925183] IO window: 00001400-000014ff [ 12.925220] PREFETCH window: 50000000-53ffffff [ 12.925264] MEM window: 54000000-57ffffff [ 12.925302] PCI: Bridge: 0000:00:14.4 [ 12.925341] IO window: 1000-1fff [ 12.925384] MEM window: d0000000-d03fffff [ 12.925421] PREFETCH window: 50000000-53ffffff [ 12.925476] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 12.925481] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 12.925507] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 12.925619] NET: Registered protocol family 2 [ 12.935588] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 12.936074] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 12.938444] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 12.939059] TCP: Hash tables configured (established 131072 bind 65536) [ 12.939107] TCP reno registered [ 12.942504] VFS: Disk quotas dquot_6.5.1 [ 12.942563] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 12.942722] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 12.943051] NTFS driver 2.1.28 [Flags: R/O]. [ 12.943123] fuse init (API version 7.8) [ 12.943320] io scheduler noop registered [ 12.943364] io scheduler anticipatory registered [ 12.943409] io scheduler deadline registered [ 12.943462] io scheduler cfq registered (default) [ 12.943509] PCI: MSI quirk detected. MSI deactivated. [ 12.944854] Boot video device is 0000:01:05.0 [ 12.945013] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 12.945029] assign_interrupt_mode Found MSI capability [ 12.945080] Allocate Port Service[0000:00:04.0:pcie00] [ 12.945109] Allocate Port Service[0000:00:04.0:pcie01] [ 12.945134] Allocate Port Service[0000:00:04.0:pcie02] [ 12.945179] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 12.945193] assign_interrupt_mode Found MSI capability [ 12.945239] Allocate Port Service[0000:00:05.0:pcie00] [ 12.945264] Allocate Port Service[0000:00:05.0:pcie01] [ 12.945288] Allocate Port Service[0000:00:05.0:pcie02] [ 12.945383] AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support [ 12.945398] AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support [ 12.945463] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 12.945618] radeonfb: Retrieved PLL infos from BIOS [ 12.945664] radeonfb: Reference=14.32 MHz (RefDiv=6) Memory=300.00 Mhz, System=205.00 MHz [ 12.947453] radeonfb: PLL min 20000 max 40000 [ 13.360927] Non-DDC laptop panel detected [ 13.437524] i2c-adapter i2c-2: unable to read EDID block. [ 13.556347] i2c-adapter i2c-2: unable to read EDID block. [ 13.675171] i2c-adapter i2c-2: unable to read EDID block. [ 13.925093] radeonfb: Monitor 1 type LCD found [ 13.925137] radeonfb: Monitor 2 type no found [ 13.925182] radeonfb: panel ID string: CMO N150P5-L01 [ 13.925183] [ 13.925268] radeonfb: detected LVDS panel size from BIOS: 1400x1050 [ 13.925313] radeondb: BIOS provided dividers will be used [ 13.925597] radeonfb (0000:01:05.0): ATI Radeon YU [ 13.927235] ACPI: AC Adapter [C177] (on-line) [ 13.927482] ACPI: Battery Slot [C179] (battery present) [ 13.927692] ACPI: Battery Slot [C178] (battery absent) [ 13.927837] input: Power Button (FF) as /class/input/input0 [ 13.927883] ACPI: Power Button (FF) [PWRF] [ 13.927994] input: Sleep Button (CM) as /class/input/input1 [ 13.928039] ACPI: Sleep Button (CM) [C1F0] [ 13.928148] input: Lid Switch as /class/input/input2 [ 13.928193] ACPI: Lid Switch [C1F1] [ 13.928410] ACPI: Transitioning device [C270] to D3 [ 13.928455] ACPI: Transitioning device [C270] to D3 [ 13.928501] ACPI: Fan [C270] (off) [ 13.928683] ACPI: Transitioning device [C271] to D3 [ 13.928727] ACPI: Transitioning device [C271] to D3 [ 13.928772] ACPI: Fan [C271] (off) [ 13.928954] ACPI: Transitioning device [C272] to D3 [ 13.928999] ACPI: Transitioning device [C272] to D3 [ 13.929044] ACPI: Fan [C272] (off) [ 13.929231] ACPI: Transitioning device [C273] to D3 [ 13.929275] ACPI: Transitioning device [C273] to D3 [ 13.929321] ACPI: Fan [C273] (off) [ 13.929606] ACPI: CPU0 (power states: C1[C1] C3[C3]) [ 13.929759] ACPI: Processor [C000] (supports 8 throttling states) [ 13.937037] ACPI: Thermal Zone [TZ1] (67 C) [ 13.940198] ACPI: Thermal Zone [TZ2] (55 C) [ 13.948471] ACPI: Thermal Zone [TZ3] (27 C) [ 13.965984] Non-volatile memory driver v1.2 [ 13.966095] Linux agpgart interface v0.102 [ 13.966196] ipmi message handler version 39.1 [ 13.966242] ipmi device interface [ 13.966324] IPMI System Interface driver. [ 13.975049] ipmi_si: Unable to find any System Interface(s) [ 13.975096] IPMI Watchdog: driver initialized [ 13.975141] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 13.975193] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 13.975245] Hangcheck: Using get_cycles(). [ 13.975290] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 13.975725] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.975817] ACPI: PCI interrupt for device 0000:00:14.6 disabled [ 13.976278] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 13.976537] loop: module loaded [ 13.976721] nbd: registered device at major 43 [ 13.977350] ACPI: PCI Interrupt 0000:02:04.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 13.977520] tg3.c:v3.81 (September 5, 2007) [ 13.977589] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 14.007844] eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0f:b0:f7:d7:da [ 14.008124] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] [ 14.008175] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 14.008293] PPP generic driver version 2.4.2 [ 14.008385] PPP Deflate Compression module registered [ 14.008430] PPP BSD Compression module registered [ 14.008529] PPP MPPE Compression module registered [ 14.008574] NET: Registered protocol family 24 [ 14.008692] tun: Universal TUN/TAP device driver, 1.6 [ 14.008737] tun: (C) 1999-2004 Max Krasnyansky [ 14.009034] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 14.009225] scsi0 : pata_atiixp [ 14.009314] scsi1 : pata_atiixp [ 14.009431] ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000013010 irq 14 [ 14.009485] ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000013018 irq 15 [ 14.042916] Marking TSC unstable due to TSC halts in C3 [ 14.042967] Time: acpi_pm clocksource has been installed. [ 14.163262] ata1.00: ATA-6: FUJITSU MHV2080AH, 00830096, max UDMA/100 [ 14.163308] ata1.00: 156301488 sectors, multi 16: LBA [ 14.185204] ata1.00: configured for UDMA/100 [ 14.489877] ata2.00: ATAPI: MATSHITAUJ-840D, 1.02, max MWDMA2 [ 14.646642] ata2.00: configured for MWDMA2 [ 14.646758] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0083 PQ: 0 ANSI: 5 [ 14.646882] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 14.646935] sd 0:0:0:0: [sda] Write Protect is off [ 14.646980] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.646990] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.647087] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 14.647137] sd 0:0:0:0: [sda] Write Protect is off [ 14.647182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 14.647192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 14.647245] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 14.711132] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.711225] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.713092] scsi 1:0:0:0: CD-ROM MATSHITA UJ-840D 1.02 PQ: 0 ANSI: 5 [ 14.719788] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 14.719834] Uniform CD-ROM driver Revision: 3.20 [ 14.719923] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 14.719969] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 14.720217] ACPI: PCI Interrupt 0000:02:04.2[C] -> GSI 21 (level, low) -> IRQ 21 [ 14.770444] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0013000-d00137ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 14.770586] ieee1394: raw1394: /dev/raw1394 device initialized [ 14.770653] usbmon: debugfs is not available [ 14.770738] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 14.771235] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 14.771400] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 14.771506] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0802000 [ 14.771562] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 14.771779] usb usb1: configuration #1 chosen from 1 choice [ 14.771890] hub 1-0:1.0: USB hub found [ 14.771940] hub 1-0:1.0: 8 ports detected [ 14.872803] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 14.872840] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 14.873083] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 14.873238] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 14.873305] ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0800000 [ 14.927742] usb usb2: configuration #1 chosen from 1 choice [ 14.927823] hub 2-0:1.0: USB hub found [ 14.927878] hub 2-0:1.0: 4 ports detected [ 15.028549] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 15.028759] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 15.028915] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 15.028986] ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0801000 [ 15.083540] usb usb3: configuration #1 chosen from 1 choice [ 15.083620] hub 3-0:1.0: USB hub found [ 15.083675] hub 3-0:1.0: 4 ports detected [ 15.438847] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 15.555971] usb 1-8: configuration #1 chosen from 1 choice [ 15.978045] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 16.024095] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f99292d1c0c] [ 16.113102] usb 3-1: configuration #1 chosen from 1 choice [ 16.331521] usb 3-3: new low speed USB device using ohci_hcd and address 3 [ 16.472626] usb 3-3: configuration #1 chosen from 1 choice [ 16.578194] usbcore: registered new interface driver usblp [ 16.578240] Initializing USB Mass Storage driver... [ 16.578342] scsi2 : SCSI emulation for USB Mass Storage devices [ 16.578432] usb-storage: device found at 4 [ 16.578433] usb-storage: waiting for device to settle before scanning [ 16.578446] usbcore: registered new interface driver usb-storage [ 16.578492] USB Mass Storage support registered. [ 16.578596] PNP: PS/2 Controller [PNP0303:C1C4,PNP0f13:C1C5] at 0x60,0x64 irq 1,12 [ 16.580432] i8042.c: Detected active multiplexing controller, rev 1.1. [ 16.581240] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 16.581319] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 16.581393] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 16.581465] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 16.581538] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 16.581661] mice: PS/2 mouse device common for all mice [ 16.603540] input: AT Translated Set 2 keyboard as /class/input/input3 [ 16.615654] input: PC Speaker as /class/input/input4 [ 17.225113] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 17.264940] input: SynPS/2 Synaptics TouchPad as /class/input/input5 [ 17.267836] I2O subsystem v1.325 [ 17.267880] i2o: max drivers = 8 [ 17.268002] i2c /dev entries driver [ 17.268362] sc520_wdt: WDT driver for SC520 initialised. timeout=30 sec (nowayout=0) [ 17.268413] sc1200wdt: build 20020303 [ 17.268479] sc1200wdt: io parameter must be specified [ 17.268544] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 17.268635] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 17.268703] Bluetooth: HCI USB driver ver 2.9 [ 17.270513] usbcore: registered new interface driver hci_usb [ 17.270560] Bluetooth: Virtual HCI driver ver 1.2 [ 17.270629] Bluetooth: HCI UART driver ver 2.2 [ 17.270674] Bluetooth: HCI H4 protocol initialized [ 17.270719] Bluetooth: HCI BCSP protocol initialized [ 17.270763] Bluetooth: Broadcom Blutonium firmware driver ver 1.1 [ 17.270835] usbcore: registered new interface driver bcm203x [ 17.270881] Bluetooth: Digianswer Bluetooth USB driver ver 0.8 [ 17.270951] usbcore: registered new interface driver bpa10x [ 17.270997] Bluetooth: BlueFRITZ! USB driver ver 1.1 [ 17.271067] usbcore: registered new interface driver bfusb [ 17.271113] EDAC MC: Ver: 2.1.0 Sep 23 2007 [ 17.271361] sdhci: Secure Digital Host Controller Interface driver [ 17.271406] sdhci: Copyright(c) Pierre Ossman [ 17.271478] sdhci: SDHCI controller found at 0000:02:04.4 [104c:8034] (rev 0) [ 17.271546] ACPI: PCI Interrupt 0000:02:04.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 17.272215] mmc0: SDHCI at 0xd001a000 irq 21 DMA [ 17.272495] mmc1: SDHCI at 0xd001b000 irq 21 DMA [ 17.272776] mmc2: SDHCI at 0xd001c000 irq 21 DMA [ 17.272843] wbsd: Winbond W83L51xD SD/MMC card interface driver [ 17.272888] wbsd: Copyright(c) Pierre Ossman [ 17.273007] usbcore: registered new interface driver hiddev [ 17.278693] input: Logitech USB Receiver as /class/input/input6 [ 17.278793] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 [ 17.278921] usbcore: registered new interface driver usbhid [ 17.278966] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 17.279048] Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC). [ 17.280348] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 17.290264] ALSA device list: [ 17.290313] #0: ATI IXP rev 2 with unknown codec at 0xd0804000, irq 17 [ 17.290397] oprofile: using NMI interrupt. [ 17.290470] Netfilter messages via NETLINK v0.30. [ 17.290543] ip_tables: (C) 2000-2006 Netfilter Core Team [ 17.290608] arp_tables: (C) 2002 David S. Miller [ 17.290660] TCP cubic registered [ 17.290710] NET: Registered protocol family 1 [ 17.290787] NET: Registered protocol family 10 [ 17.290885] lo: Disabled Privacy Extensions [ 17.290982] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 17.291040] IPv6 over IPv4 tunneling driver [ 17.291162] sit0: Disabled Privacy Extensions [ 17.291280] NET: Registered protocol family 17 [ 17.291327] Bluetooth: L2CAP ver 2.8 [ 17.291371] Bluetooth: L2CAP socket layer initialized [ 17.291416] Bluetooth: SCO (Voice Link) ver 0.5 [ 17.291460] Bluetooth: SCO socket layer initialized [ 17.291524] Bluetooth: RFCOMM socket layer initialized [ 17.291578] Bluetooth: RFCOMM TTY layer initialized [ 17.291622] Bluetooth: RFCOMM ver 1.8 [ 17.291665] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 17.291710] Bluetooth: BNEP filters: protocol multicast [ 17.291755] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 17.291850] 802.1Q VLAN Support v1.8 Ben Greear [ 17.291896] All bugs added by David S. Miller [ 17.291944] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 17.291990] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 17.292042] ieee80211_crypt: registered algorithm 'NULL' [ 17.292044] ieee80211_crypt: registered algorithm 'WEP' [ 17.292045] ieee80211_crypt: registered algorithm 'CCMP' [ 17.292047] ieee80211_crypt: registered algorithm 'TKIP' [ 17.292054] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile ML-40 processors (1 cpu cores) (version 2.00.00) [ 17.294547] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x4 [ 17.294592] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 [ 17.294637] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x8 [ 17.294682] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xa [ 17.294727] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x16 [ 17.294817] powernow-k8: ph2 null fid transition 0xe [ 17.295012] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 17.328364] kjournald starting. Commit interval 5 seconds [ 17.328415] EXT3-fs: mounted filesystem with ordered data mode. [ 17.328465] VFS: Mounted root (ext3 filesystem) readonly. [ 17.328520] Freeing unused kernel memory: 232k freed [ 20.915596] input: Video Bus as /class/input/input7 [ 20.915617] ACPI: Video Device [C049] (multi-head: yes rom: no post: no) [ 21.483607] Real Time Clock Driver v1.12ac [ 21.904657] EXT3 FS on sda7, internal journal [ 22.060420] scsi 2:0:0:0: Direct-Access ST350064 1A 3.AA PQ: 0 ANSI: 0 [ 22.061896] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 22.062902] sd 2:0:0:0: [sdb] Write Protect is off [ 22.062905] sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 [ 22.062907] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 22.063766] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 22.064773] sd 2:0:0:0: [sdb] Write Protect is off [ 22.064775] sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00 [ 22.064776] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 22.064780] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 22.136568] sd 2:0:0:0: [sdb] Attached SCSI disk [ 22.136769] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 22.136963] usb-storage: device scan complete [ 22.328723] kjournald starting. Commit interval 5 seconds [ 22.329049] EXT3 FS on sda8, internal journal [ 22.329054] EXT3-fs: mounted filesystem with ordered data mode. [ 22.372828] NTFS volume version 3.1. [ 22.458392] Adding 1791208k swap on /dev/sda6. Priority:-1 extents:1 across:1791208k [ 36.274916] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.842386] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 37.842391] tg3: eth0: Flow control is on for TX and on for RX. [ 37.843931] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 48.263202] eth0: no IPv6 routers present [ 93.000667] Stopping tasks ... done. [ 93.033605] Suspending console(s) [ 93.469511] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 93.469606] sd 0:0:0:0: [sda] Stopping disk [ 94.203773] ACPI handle has no context! [ 94.203975] ACPI handle has no context! [ 94.203994] ACPI: PCI interrupt for device 0000:02:04.4 disabled [ 94.203999] ACPI handle has no context! [ 94.211811] ACPI handle has no context! [ 94.211822] ACPI: PCI interrupt for device 0000:02:04.3 disabled [ 94.211827] ACPI handle has no context! [ 94.219818] ACPI handle has no context! [ 94.379107] radeonfb (0000:01:05.0): suspending for event: 2... [ 94.379231] ACPI: PCI interrupt for device 0000:00:14.5 disabled [ 94.379849] ACPI: PCI interrupt for device 0000:00:14.1 disabled [ 94.379890] ACPI: PCI interrupt for device 0000:00:13.2 disabled [ 94.383782] ACPI: PCI interrupt for device 0000:00:13.1 disabled [ 94.383803] ACPI: PCI interrupt for device 0000:00:13.0 disabled [ 94.384175] ACPI: Transitioning device [C273] to D0 [ 94.384177] ACPI: Transitioning device [C273] to D0 [ 94.384517] ACPI: Transitioning device [C272] to D0 [ 94.384519] ACPI: Transitioning device [C272] to D0 [ 94.384859] ACPI: Transitioning device [C271] to D0 [ 94.384860] ACPI: Transitioning device [C271] to D0 [ 94.385197] ACPI: Transitioning device [C270] to D0 [ 94.385199] ACPI: Transitioning device [C270] to D0 [ 0.172380] Back to C! [ 0.188587] ACPI: Transitioning device [C270] to D3 [ 0.188589] ACPI: Transitioning device [C270] to D3 [ 0.188729] ACPI: Transitioning device [C271] to D3 [ 0.188730] ACPI: Transitioning device [C271] to D3 [ 0.188873] ACPI: Transitioning device [C272] to D3 [ 0.188875] ACPI: Transitioning device [C272] to D3 [ 0.189015] ACPI: Transitioning device [C273] to D3 [ 0.189016] ACPI: Transitioning device [C273] to D3 [ 0.191886] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 22202121, writing 2202121) [ 0.191895] PM: Writing back config space on device 0000:00:04.0 at offset 9 (was 0, writing fff0) [ 0.191897] PM: Writing back config space on device 0000:00:04.0 at offset 8 (was 0, writing fff0) [ 0.191899] PM: Writing back config space on device 0000:00:04.0 at offset 7 (was 101, writing 1f1) [ 0.191902] PM: Writing back config space on device 0000:00:04.0 at offset 3 (was 10000, writing 10010) [ 0.191905] PM: Writing back config space on device 0000:00:04.0 at offset 1 (was 100000, writing 100004) [ 0.191909] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.191914] PM: Writing back config space on device 0000:00:05.0 at offset 9 (was 0, writing fff0) [ 0.191917] PM: Writing back config space on device 0000:00:05.0 at offset 8 (was 0, writing fff0) [ 0.191919] PM: Writing back config space on device 0000:00:05.0 at offset 7 (was 101, writing 1f1) [ 0.191922] PM: Writing back config space on device 0000:00:05.0 at offset 3 (was 10000, writing 10010) [ 0.191925] PM: Writing back config space on device 0000:00:05.0 at offset 1 (was 100000, writing 100004) [ 0.191929] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 0.191935] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 0.191956] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 0.195660] PCI: Enabling device 0000:00:13.2 (0000 -> 0002) [ 0.195662] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [ 0.195678] PM: Writing back config space on device 0000:00:13.2 at offset 1 (was 2b00006, writing 2b00017) [ 0.195706] PM: Writing back config space on device 0000:00:14.1 at offset f (was 100, writing 10a) [ 0.195713] PM: Writing back config space on device 0000:00:14.1 at offset 8 (was 1, writing 3011) [ 0.195718] PM: Writing back config space on device 0000:00:14.1 at offset 3 (was 0, writing 4010) [ 0.195722] PM: Writing back config space on device 0000:00:14.1 at offset 1 (was 2300000, writing 2300005) [ 0.195731] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.684944] PM: Writing back config space on device 0000:00:14.4 at offset 3 (was 816000, writing 814000) [ 0.684958] PM: Writing back config space on device 0000:00:14.5 at offset f (was 20200, writing 20205) [ 0.684967] PM: Writing back config space on device 0000:00:14.5 at offset 4 (was 0, writing d0804000) [ 0.684970] PM: Writing back config space on device 0000:00:14.5 at offset 3 (was 800000, writing 804010) [ 0.684974] PM: Writing back config space on device 0000:00:14.5 at offset 1 (was 4300000, writing 4300002) [ 0.684983] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.685358] atiixp: codec reset timeout [ 0.686002] PM: Writing back config space on device 0000:00:14.6 at offset f (was 20200, writing 20205) [ 0.686010] PM: Writing back config space on device 0000:00:14.6 at offset 4 (was 0, writing d0805000) [ 0.686013] PM: Writing back config space on device 0000:00:14.6 at offset 3 (was 800000, writing 804010) [ 0.686017] PM: Writing back config space on device 0000:00:14.6 at offset 1 (was 4300000, writing 4300003) [ 0.686040] radeonfb (0000:01:05.0): resuming from state: 2... [ 0.753560] ata1.00: limited to UDMA/33 due to 40-wire cable [ 0.761553] ata1.00: configured for UDMA/33 [ 0.761573] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 0.761581] sd 0:0:0:0: [sda] Write Protect is off [ 0.761582] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.761593] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.909373] ata2.00: configured for MWDMA2 [ 1.051493] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006) [ 1.052205] tg3: eth0: Link is down. [ 1.160980] PM: Writing back config space on device 0000:02:02.0 at offset f (was 100, writing 105) [ 1.160991] PM: Writing back config space on device 0000:02:02.0 at offset 4 (was 0, writing d0010000) [ 1.160994] PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0, writing 4000) [ 1.160998] PM: Writing back config space on device 0000:02:02.0 at offset 1 (was 0, writing 6) [ 1.161007] PM: Writing back config space on device 0000:02:04.0 at offset f (was 34001ff, writing 344010b) [ 1.161010] PM: Writing back config space on device 0000:02:04.0 at offset e (was 0, writing 14fc) [ 1.161013] PM: Writing back config space on device 0000:02:04.0 at offset d (was 0, writing 1400) [ 1.161017] PM: Writing back config space on device 0000:02:04.0 at offset c (was 0, writing 10fc) [ 1.161020] PM: Writing back config space on device 0000:02:04.0 at offset b (was 0, writing 1000) [ 1.161024] PM: Writing back config space on device 0000:02:04.0 at offset a (was 0, writing 57fff000) [ 1.161027] PM: Writing back config space on device 0000:02:04.0 at offset 9 (was 0, writing 54000000) [ 1.161030] PM: Writing back config space on device 0000:02:04.0 at offset 8 (was 0, writing 53fff000) [ 1.161034] PM: Writing back config space on device 0000:02:04.0 at offset 7 (was 0, writing 50000000) [ 1.161037] PM: Writing back config space on device 0000:02:04.0 at offset 6 (was 0, writing b0060302) [ 1.161041] PM: Writing back config space on device 0000:02:04.0 at offset 4 (was 0, writing d0012000) [ 1.161045] PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 820000, writing 824010) [ 1.161049] PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2100000, writing 2100007) [ 1.161062] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 1.164762] PM: Writing back config space on device 0000:02:04.2 at offset f (was 4020300, writing 4020309) [ 1.164772] PM: Writing back config space on device 0000:02:04.2 at offset 5 (was 0, writing d0014000) [ 1.164776] PM: Writing back config space on device 0000:02:04.2 at offset 4 (was 0, writing d0013000) [ 1.164779] PM: Writing back config space on device 0000:02:04.2 at offset 3 (was 800000, writing 804010) [ 1.164783] PM: Writing back config space on device 0000:02:04.2 at offset 1 (was 2100000, writing 2100006) [ 1.182973] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d0013000-d00137ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.186910] PM: Writing back config space on device 0000:02:04.3 at offset f (was 40702ff, writing 4070209) [ 1.186921] PM: Writing back config space on device 0000:02:04.3 at offset 4 (was 0, writing d0018000) [ 1.186924] PM: Writing back config space on device 0000:02:04.3 at offset 3 (was 800000, writing 804010) [ 1.186929] PM: Writing back config space on device 0000:02:04.3 at offset 1 (was 2100000, writing 2100006) [ 1.186938] ACPI: PCI Interrupt 0000:02:04.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 1.190904] PM: Writing back config space on device 0000:02:04.4 at offset f (was 40703ff, writing 4070309) [ 1.190913] PM: Writing back config space on device 0000:02:04.4 at offset 6 (was 0, writing d001c000) [ 1.190917] PM: Writing back config space on device 0000:02:04.4 at offset 5 (was 0, writing d001b000) [ 1.190920] PM: Writing back config space on device 0000:02:04.4 at offset 4 (was 0, writing d001a000) [ 1.190924] PM: Writing back config space on device 0000:02:04.4 at offset 3 (was 800000, writing 804010) [ 1.190928] PM: Writing back config space on device 0000:02:04.4 at offset 1 (was 2100000, writing 2100006) [ 1.190937] ACPI: PCI Interrupt 0000:02:04.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 1.191118] sd 0:0:0:0: [sda] Starting disk [ 1.478983] Restarting tasks ... done. [ 1.731348] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 1.731352] tg3: eth0: Flow control is on for TX and on for RX. --Boundary-00=_1zr9G8iKcDj3ISi-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/