Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <CAEm4hYXLNP6pcCj5Av35sRG6kCOF0H3+a7VfTtFfGduMgcXJhA@mail.gmail.com>
 <20230403224517.GA3472913@bhelgaas>
In-Reply-To: <20230403224517.GA3472913@bhelgaas>
From:   Xinghui Li <korantwork@gmail.com>
Date:   Tue, 4 Apr 2023 19:02:59 +0800
Message-ID: <CAEm4hYXNUdm_wdK580xsZBUWTycJFsEhjFJ+d57U_QYu6RFWxg@mail.gmail.com>
Subject: Re: [PATCH v4] PCI: vmd: Add the module param to adjust MSI mode
To:     Bjorn Helgaas <helgaas@kernel.org>
Cc:     nirmal.patel@linux.intel.com, kbusch@kernel.org,
        jonathan.derrick@linux.dev, lpieralisi@kernel.org,
        linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
        Xinghui Li <korantli@tencent.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

On Tue, Apr 4, 2023 at 6:45=E2=80=AFAM Bjorn Helgaas <helgaas@kernel.org> w=
rote:
>
> > In the patch I send in last email, We speculate that the VMD
> > Controller aggregate interrupts,
> > making the PCIe port less stressed and improving iops. In this
> > case(lots of 4k random IO), if we enable the VMD MSI
> > remapping, we found the interrupts from VMD Controller's MSI are less
> > and the IOPS is much higher.
>
> Great, that's useful information about why users would want to use
> this parameter.
>
> Obviously the other half is to mention the reasons why they may not be
> able to use it.  If "msi_remap=3Doff" were *always* safe and desirable,
> we would just do that unconditionally and there would be no point in a
> parameter.
>
> > > > I place the "vmd_config_msi_remap_param" that is VMD MSI-X's mode
> > > > param configuring helper front
> > > > "vmd_enable_domain". So, It will not change the logic disabling
> > > > remapping from ee81ee84f873, such as
> > > > "Currently MSI remapping must be enabled in guest passthrough mode"=
.
> > > > So, if the user config the wrong type, it will not work, and they c=
an
> > > > find it by dmesg.
> > >
> > > That's kind of a problem.  I'm not in favor of something failing and
> > > the user having to debug it via dmesg.  That causes user frustration
> > > and problem reports.
> >
> > What about adding a sysfs node for it in VMD PCI bus dir, which allows
> > users to catch VMD's MSI current working mode?
>
> No, a sysfs node is not the answer to this.  If we *can* avoid a
> non-working situation, we should avoid it.  If users see a non-working
> situation, they will rightly complain, and somebody will have to debug
> it.  We don't want that.
emm~
I privately suppose: In the traditional way without module parameters,
this problem also exists. If the user disables remapping in guest os, the V=
MD
driver will force it to remapping mode.
What about I add the additional description in MODULE_PARM_DESC and comment=
?
As for some devices not support disable remapping,  What about changing
the param to disabae_bypass=3D0/1?
And make it clear in the description:
this parameter will only affect the disabling of bypass mode on
devices that support it.
>
> My point is that apparently guest passthrough mode is relevant and
> maybe it should be part of the commit log about how this parameter
> should be used.
You are right~
I will add some clarification on how to configure VMD MSI in the guest.
>
> Bjorn