Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Devi Priya <quic_devipriy@quicinc.com>
To:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <lgirdwood@gmail.com>,
        <broonie@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>,
        <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>
CC:     <quic_srichara@quicinc.com>, <quic_sjaganat@quicinc.com>,
        <quic_kathirav@quicinc.com>, <quic_arajkuma@quicinc.com>,
        <quic_anusha@quicinc.com>, <quic_ipkumar@quicinc.com>
Subject: [PATCH V3 4/5] arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
Date:   Thu, 6 Apr 2023 12:30:31 +0530
Message-ID: <20230406070032.22243-5-quic_devipriy@quicinc.com>
In-Reply-To: <20230406070032.22243-1-quic_devipriy@quicinc.com>
References: <20230406070032.22243-1-quic_devipriy@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add support for SMPA1 regulator node in IPQ9574.

Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
---
 Changes in V3:
	- Updated the regulator-min-microvolt with the SVS voltage 725000uV

 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 3ae38cf327ea..06f579b1c590 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -44,6 +44,25 @@
 	};
 };
 
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Updating the regulator-min-microvolt with SVS voltage of 725000uV so that
+		 * the regulators are brought up with 725000uV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
 &pcie1_phy {
 	status = "okay";
 };
-- 
2.17.1