Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
MIME-Version: 1.0
From:   Rob Herring <robh@kernel.org>
To:     Daniel Matyas <daniel.matyas@analog.com>
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Guenter Roeck <linux@roeck-us.net>,
        Rob Herring <robh+dt@kernel.org>,
        Greg.Schwendimann@infineon.com,
        =?utf-8?q?Pali_Roh=C3=A1r?= <pali@kernel.org>,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        linux-hwmon@vger.kernel.org, Mark Brown <broonie@kernel.org>,
        Jean Delvare <jdelvare@suse.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor.dooley@microchip.com>,
        Vincent Tremblay <vincent@vtremblay.dev>,
        Marek Vasut <marex@denx.de>
In-Reply-To: <20230406164331.6557-2-daniel.matyas@analog.com>
References: <20230406164331.6557-1-daniel.matyas@analog.com>
 <20230406164331.6557-2-daniel.matyas@analog.com>
Message-Id: <168080484662.3671846.16209817137563591362.robh@kernel.org>
Subject: Re: [PATCH 1/2] dt-bindings: hwmon: add MAX31827
Date:   Thu, 06 Apr 2023 13:14:48 -0500
Precedence: bulk


On Thu, 06 Apr 2023 19:43:26 +0300, Daniel Matyas wrote:
> MAX31827 is a low-power temperature switch with I2C interface.
> 
> The device is a ±1°C accuracy from -40°C to +125°C
> (12 bits) local temperature switch and sensor with I2C/SM-
> Bus interface. The combination of small 6-bump wafer-lev-
> el package (WLP) and high accuracy makes this temper-
> ature sensor/switch ideal for a wide range of applications.
> 
> Signed-off-by: Daniel Matyas <daniel.matyas@analog.com>
> ---
>  .../bindings/hwmon/adi,max31827.yaml          | 48 +++++++++++++++++++
>  .../devicetree/bindings/trivial-devices.yaml  |  2 +
>  MAINTAINERS                                   |  7 +++
>  3 files changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/hwmon/adi,max31827.yaml:48:4: [error] no new line character at the end of file (new-line-at-end-of-file)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/adi,max31827.example.dtb: max31827@42: 'vref-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/trivial-devices.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230406164331.6557-2-daniel.matyas@analog.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.