Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Bartosz Golaszewski <brgl@bgdev.pl>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Manivannan Sadhasivam <mani@kernel.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        Avri Altman <avri.altman@wdc.com>,
        Bart Van Assche <bvanassche@acm.org>
Cc:     linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-scsi@vger.kernel.org,
        Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH v2 5/5] arm64: dts: qcom: sa8775p-ride: enable UFS
Date:   Thu,  6 Apr 2023 21:47:03 +0200
Message-Id: <20230406194703.495836-6-brgl@bgdev.pl>
In-Reply-To: <20230406194703.495836-1-brgl@bgdev.pl>
References: <20230406194703.495836-1-brgl@bgdev.pl>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Enable the UFS and its PHY on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index f238a02a5448..2bb001a3ea55 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "sa8775p.dtsi"
@@ -20,6 +21,7 @@ aliases {
 		serial2 = &uart17;
 		i2c18 = &i2c18;
 		spi16 = &spi16;
+		ufshc1 = &ufs_mem_hc;
 	};
 
 	chosen {
@@ -426,6 +428,23 @@ &uart17 {
 	status = "okay";
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };
-- 
2.37.2