Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 06/10] arm64: dts: qcom: sdm845: remove superfluous "input-enable"
Date:   Fri,  7 Apr 2023 19:58:03 +0200
Message-Id: <20230407175807.124394-6-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230407175807.124394-1-krzysztof.kozlowski@linaro.org>
References: <20230407175807.124394-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi  | 3 ---
 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts    | 2 --
 arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi         | 1 -
 arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts   | 2 --
 arch/arm64/boot/dts/qcom/sdm845.dtsi                 | 5 -----
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 5 -----
 6 files changed, 18 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 0c268c560d37..e0c0c9090211 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -773,7 +773,6 @@ hall_sensor_default: hall-sensor-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	tri_state_key_default: tri-state-key-default-state {
@@ -802,7 +801,6 @@ panel_te_pin: panel-te-state {
 		function = "mdp_vsync";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	panel_esd_pin: panel-esd-state {
@@ -810,7 +808,6 @@ panel_esd_pin: panel-esd-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
-		input-enable;
 	};
 
 	speaker_default: speaker-default-state {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index b54e304abf71..9d2ebb61b464 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -608,7 +608,6 @@ ts_int_active: ts-int-active-state {
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
-		input-enable;
 	};
 
 	ts_int_suspend: ts-int-suspend-state {
@@ -616,7 +615,6 @@ ts_int_suspend: ts-int-suspend-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-pull-down;
-		input-enable;
 	};
 
 	ts_reset_active: ts-reset-active-state {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
index 0d7c37f39176..c15d48860646 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -80,7 +80,6 @@ wcd_intr_default: wcd-intr-default-state {
 		pins = "gpio54";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-down;
 		drive-strength = <2>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 1b7fdbae6a2b..37844ecfbc2b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -586,7 +586,6 @@ ts_int_default: ts-int-default-state {
 		function = "gpio";
 		bias-pull-down;
 		drive-strength = <16>;
-		input-enable;
 	};
 
 	ts_reset_sleep: ts-reset-sleep-state {
@@ -601,7 +600,6 @@ ts_int_sleep: ts-int-sleep-state {
 		function = "gpio";
 		bias-pull-down;
 		drive-strength = <2>;
-		input-enable;
 	};
 
 	sde_dsi_active: sde-dsi-active-state {
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index da4b200281d8..d6a786c8b99f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3174,7 +3174,6 @@ quat_mi2s_sleep: quat-mi2s-sleep-state {
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_active: quat-mi2s-active-state {
@@ -3190,7 +3189,6 @@ quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state {
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_sd0_active: quat-mi2s-sd0-active-state {
@@ -3205,7 +3203,6 @@ quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state {
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_sd1_active: quat-mi2s-sd1-active-state {
@@ -3220,7 +3217,6 @@ quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state {
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_sd2_active: quat-mi2s-sd2-active-state {
@@ -3235,7 +3231,6 @@ quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state {
 				function = "gpio";
 				drive-strength = <2>;
 				bias-pull-down;
-				input-enable;
 			};
 
 			quat_mi2s_sd3_active: quat-mi2s-sd3-active-state {
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 5c688cb6a7ce..1326c171fe72 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -606,7 +606,6 @@ i2c3_hid_active: i2c2-hid-active-state {
 		pins = "gpio37";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-up;
 		drive-strength = <2>;
 	};
@@ -615,7 +614,6 @@ i2c5_hid_active: i2c5-hid-active-state {
 		pins = "gpio125";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-up;
 		drive-strength = <2>;
 	};
@@ -624,7 +622,6 @@ i2c11_hid_active: i2c11-hid-active-state {
 		pins = "gpio92";
 		function = "gpio";
 
-		input-enable;
 		bias-pull-up;
 		drive-strength = <2>;
 	};
@@ -633,7 +630,6 @@ lid_pin_active: lid-pin-state {
 		pins = "gpio124";
 		function = "gpio";
 
-		input-enable;
 		bias-disable;
 	};
 
@@ -641,7 +637,6 @@ mode_pin_active: mode-pin-state {
 		pins = "gpio95";
 		function = "gpio";
 
-		input-enable;
 		bias-disable;
 	};
 };
-- 
2.34.1