Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 05/10] arm64: dts: qcom: sc8280xp: remove superfluous "input-enable"
Date:   Fri,  7 Apr 2023 19:58:02 +0200
Message-Id: <20230407175807.124394-5-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230407175807.124394-1-krzysztof.kozlowski@linaro.org>
References: <20230407175807.124394-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 4c75da1bac2d..5632c3b8e416 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -2728,7 +2728,6 @@ data-pins {
 					pins = "gpio7";
 					function = "dmic1_data";
 					drive-strength = <8>;
-					input-enable;
 				};
 			};
 
@@ -2746,7 +2745,6 @@ data-pins {
 					function = "dmic1_data";
 					drive-strength = <2>;
 					bias-pull-down;
-					input-enable;
 				};
 			};
 
@@ -2762,7 +2760,6 @@ data-pins {
 					pins = "gpio9";
 					function = "dmic2_data";
 					drive-strength = <8>;
-					input-enable;
 				};
 			};
 
@@ -2780,7 +2777,6 @@ data-pins {
 					function = "dmic2_data";
 					drive-strength = <2>;
 					bias-pull-down;
-					input-enable;
 				};
 			};
 
-- 
2.34.1