Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <43b74b3f-e607-ba55-a5fa-326fb4b5519d@linaro.org>
Date:   Fri, 7 Apr 2023 20:11:25 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.0
Subject: Re: [PATCH 12/14] arm64: dts: qcom: sc7180: Fix trogdor qspi pin
 config
Content-Language: en-US
To:     Douglas Anderson <dianders@chromium.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Mark Brown <broonie@kernel.org>,
        Linus Walleij <linus.walleij@linaro.org>
Cc:     Matthias Kaehlcke <mka@chromium.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        linux-gpio@vger.kernel.org, Stephen Boyd <swboyd@chromium.org>,
        devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        linux-spi@vger.kernel.org, Andy Gross <agross@kernel.org>,
        linux-kernel@vger.kernel.org
References: <20230323173019.3706069-1-dianders@chromium.org>
 <20230323102605.12.I6f03f86546e6ce9abb1d24fd9ece663c3a5b950c@changeid>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230323102605.12.I6f03f86546e6ce9abb1d24fd9ece663c3a5b950c@changeid>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 23/03/2023 18:30, Douglas Anderson wrote:
> In commit 7ec3e67307f8 ("arm64: dts: qcom: sc7180-trogdor: add initial
> trogdor and lazor dt") we specified the pull settings on the boot SPI
> (the qspi) data lines as pullups to "park" the lines. This seemed like
> the right thing to do, but I never really probed the lines to confirm.
> 


>  &qup_i2c2_default {
> @@ -1336,6 +1340,22 @@ p_sensor_int_l: p-sensor-int-l-state {
>  		bias-disable;
>  	};
>  
> +	qspi_sleep: qspi-sleep-state {
> +		pins = "gpio63", "gpio64", "gpio65", "gpio68";
> +
> +		/*
> +		 * When we're not actively transferring we want pins as GPIOs
> +		 * with output disabled so that the quad SPI IP block stops
> +		 * driving them. We rely on the normal pulls configured in
> +		 * the active state and don't redefine them here. Also note
> +		 * that we don't need the reverse (output-enable) in the
> +		 * normal mode since the "output-enable" only matters for
> +		 * GPIO function.
> +		 */
> +		function = "gpio";
> +		output-disable;

Doug,

I acked some of your patches, but I assumed you tested all this. It
turns out you never run dtbs_check on the patches you sent.

Best regards,
Krzysztof