Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <0205fab6-3665-f985-41a5-3fed24644665@linaro.org>
Date:   Sat, 8 Apr 2023 16:57:52 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.0
Subject: Re: [PATCH] ARM: dts: stm32: fix typo in stm32mp15xx-dkx.dtsi
Content-Language: en-US
To:     Patrick Delaunay <patrick.delaunay@foss.st.com>,
        Alexandre TORGUE <alexandre.torgue@foss.st.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org,
        linux-stm32@st-md-mailman.stormreply.com
References: <20230407193253.1.If11ffa6edfdfef0869478412ec3cec3169483cb9@changeid>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230407193253.1.If11ffa6edfdfef0869478412ec3cec3169483cb9@changeid>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 07/04/2023 19:33, Patrick Delaunay wrote:
> Remove unnecessary space in device tree stm32mp15xx-dkx.dtsi.

Your commit subject says typo. Where is it?

> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
>  arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> index 11370ae0d868..ccd6c4722bd3 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
> @@ -382,21 +382,21 @@ vref_ddr: vref_ddr {
>  				regulator-always-on;
>  			};
>  
> -			 bst_out: boost {
> +			bst_out: boost {
>  				regulator-name = "bst_out";
>  				interrupts = <IT_OCP_BOOST 0>;
> -			 };
> +			};
>  
>  			vbus_otg: pwr_sw1 {
>  				regulator-name = "vbus_otg";
>  				interrupts = <IT_OCP_OTG 0>;
> -			 };
> +			};
>  
> -			 vbus_sw: pwr_sw2 {
> +			vbus_sw: pwr_sw2 {
>  				regulator-name = "vbus_sw";
>  				interrupts = <IT_OCP_SWOUT 0>;
>  				regulator-active-discharge = <1>;
> -			 };
> +			};
>  		};
>  
>  		onkey {

Best regards,
Krzysztof