Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 1/3] ARM: dts: qcom: apq8026: remove superfluous "input-enable"
Date:   Mon, 10 Apr 2023 20:10:03 +0200
Message-Id: <20230410181005.25853-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts    | 2 --
 arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts | 1 -
 arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts        | 3 ---
 3 files changed, 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
index 7a80e1c9f126..aa0e0e8d2a97 100644
--- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
@@ -268,7 +268,6 @@ bluetooth_default_state: bluetooth-default-state {
 		function = "gpio";
 		drive-strength = <8>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_hostwake_default_state: wlan-hostwake-default-state {
@@ -276,7 +275,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_regulator_default_state: wlan-regulator-default-state {
diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
index d64096028ab1..5593a3a60d6c 100644
--- a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
@@ -352,7 +352,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_regulator_default_state: wlan-regulator-default-state {
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index b82381229adf..b887e5361ec3 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -307,7 +307,6 @@ bluetooth_default_state: bluetooth-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	touch_pins: touch-state {
@@ -317,7 +316,6 @@ irq-pins {
 
 			drive-strength = <8>;
 			bias-pull-down;
-			input-enable;
 		};
 
 		reset-pins {
@@ -335,7 +333,6 @@ wlan_hostwake_default_state: wlan-hostwake-default-state {
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
-		input-enable;
 	};
 
 	wlan_regulator_default_state: wlan-regulator-default-state {
-- 
2.34.1