Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Bartosz Golaszewski <brgl@bgdev.pl>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Manivannan Sadhasivam <mani@kernel.org>,
        Alim Akhtar <alim.akhtar@samsung.com>,
        Avri Altman <avri.altman@wdc.com>,
        Bart Van Assche <bvanassche@acm.org>
Cc:     linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-scsi@vger.kernel.org,
        Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH v3 3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p
Date:   Tue, 11 Apr 2023 15:04:44 +0200
Message-Id: <20230411130446.401440-4-brgl@bgdev.pl>
In-Reply-To: <20230411130446.401440-1-brgl@bgdev.pl>
References: <20230411130446.401440-1-brgl@bgdev.pl>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add QMP PHY config for sa8775p and add support for the new compatible.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 38 +++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index d58822049211..5612282eb378 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -853,6 +853,41 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
 	.no_pcs_sw_reset	= true,
 };
 
+
+static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets,
+
+	.tbls = {
+		.serdes		= sm8350_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_serdes),
+		.tx		= sm8350_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_tx),
+		.rx		= sm8350_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_rx),
+		.pcs		= sm8350_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_pcs),
+	},
+	.tbls_hs_b = {
+		.serdes		= sm8350_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
+	},
+	.tbls_hs_g4 = {
+		.tx		= sm8350_ufsphy_g4_tx,
+		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
+		.rx		= sm8350_ufsphy_g4_rx,
+		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
+		.pcs		= sm8350_ufsphy_g4_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
+	},
+	.clk_list		= sm8450_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= ufsphy_v5_regs_layout,
+};
+
 static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
 	.lanes			= 2,
 
@@ -1600,6 +1635,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
 	}, {
 		.compatible = "qcom,msm8998-qmp-ufs-phy",
 		.data = &sdm845_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sa8775p-qmp-ufs-phy",
+		.data = &sa8775p_ufsphy_cfg,
 	}, {
 		.compatible = "qcom,sc8180x-qmp-ufs-phy",
 		.data = &sm8150_ufsphy_cfg,
-- 
2.37.2