Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   MD Danish Anwar <danishanwar@ti.com>
To:     "Andrew F. Davis" <afd@ti.com>, Suman Anna <s-anna@ti.com>,
        Roger Quadros <rogerq@kernel.org>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Tero Kristo <kristo@kernel.org>,
        MD Danish Anwar <danishanwar@ti.com>,
        Mathieu Poirier <mathieu.poirier@linaro.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Santosh Shilimkar <ssantosh@kernel.org>,
        Nishanth Menon <nm@ti.com>
CC:     <linux-remoteproc@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
        <srk@ti.com>, <devicetree@vger.kernel.org>,
        <netdev@vger.kernel.org>
Subject: [PATCH v8 1/4] soc: ti: pruss: Add pruss_get()/put() API
Date:   Wed, 12 Apr 2023 16:00:09 +0530
Message-ID: <20230412103012.1754161-2-danishanwar@ti.com>
In-Reply-To: <20230412103012.1754161-1-danishanwar@ti.com>
References: <20230412103012.1754161-1-danishanwar@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Tero Kristo <t-kristo@ti.com>

Add two new get and put API, pruss_get() and pruss_put() to the
PRUSS platform driver to allow client drivers to request a handle
to a PRUSS device. This handle will be used by client drivers to
request various operations of the PRUSS platform driver through
additional API that will be added in the following patches.

The pruss_get() function returns the pruss handle corresponding
to a PRUSS device referenced by a PRU remoteproc instance. The
pruss_put() is the complimentary function to pruss_get().

Co-developed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Signed-off-by: Puranjay Mohan <p-mohan@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/soc/ti/pruss.c       | 62 ++++++++++++++++++++++++++++++++++++
 include/linux/pruss_driver.h | 18 +++++++++++
 2 files changed, 80 insertions(+)

diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c
index 6882c86b3ce5..3fac92df8790 100644
--- a/drivers/soc/ti/pruss.c
+++ b/drivers/soc/ti/pruss.c
@@ -6,6 +6,7 @@
  * Author(s):
  *	Suman Anna <s-anna@ti.com>
  *	Andrew F. Davis <afd@ti.com>
+ *	Tero Kristo <t-kristo@ti.com>
  */
 
 #include <linux/clk-provider.h>
@@ -18,6 +19,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/pruss_driver.h>
 #include <linux/regmap.h>
+#include <linux/remoteproc.h>
 #include <linux/slab.h>
 
 /**
@@ -30,6 +32,66 @@ struct pruss_private_data {
 	bool has_core_mux_clock;
 };
 
+/**
+ * pruss_get() - get the pruss for a given PRU remoteproc
+ * @rproc: remoteproc handle of a PRU instance
+ *
+ * Finds the parent pruss device for a PRU given the @rproc handle of the
+ * PRU remote processor. This function increments the pruss device's refcount,
+ * so always use pruss_put() to decrement it back once pruss isn't needed
+ * anymore.
+ *
+ * This API doesn't check if @rproc is valid or not. It is expected the caller
+ * will have done a pru_rproc_get() on @rproc, before calling this API to make
+ * sure that @rproc is valid.
+ *
+ * Return: pruss handle on success, and an ERR_PTR on failure using one
+ * of the following error values
+ *    -EINVAL if invalid parameter
+ *    -ENODEV if PRU device or PRUSS device is not found
+ */
+struct pruss *pruss_get(struct rproc *rproc)
+{
+	struct pruss *pruss;
+	struct device *dev;
+	struct platform_device *ppdev;
+
+	if (IS_ERR_OR_NULL(rproc))
+		return ERR_PTR(-EINVAL);
+
+	dev = &rproc->dev;
+
+	/* make sure it is PRU rproc */
+	if (!dev->parent || !is_pru_rproc(dev->parent))
+		return ERR_PTR(-ENODEV);
+
+	ppdev = to_platform_device(dev->parent->parent);
+	pruss = platform_get_drvdata(ppdev);
+	if (!pruss)
+		return ERR_PTR(-ENODEV);
+
+	get_device(pruss->dev);
+
+	return pruss;
+}
+EXPORT_SYMBOL_GPL(pruss_get);
+
+/**
+ * pruss_put() - decrement pruss device's usecount
+ * @pruss: pruss handle
+ *
+ * Complimentary function for pruss_get(). Needs to be called
+ * after the PRUSS is used, and only if the pruss_get() succeeds.
+ */
+void pruss_put(struct pruss *pruss)
+{
+	if (IS_ERR_OR_NULL(pruss))
+		return;
+
+	put_device(pruss->dev);
+}
+EXPORT_SYMBOL_GPL(pruss_put);
+
 static void pruss_of_free_clk_provider(void *data)
 {
 	struct device_node *clk_mux_np = data;
diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h
index ecfded30ed05..cb40c2b31045 100644
--- a/include/linux/pruss_driver.h
+++ b/include/linux/pruss_driver.h
@@ -9,7 +9,9 @@
 #ifndef _PRUSS_DRIVER_H_
 #define _PRUSS_DRIVER_H_
 
+#include <linux/remoteproc/pruss.h>
 #include <linux/types.h>
+#include <linux/err.h>
 
 /*
  * enum pruss_mem - PRUSS memory range identifiers
@@ -51,4 +53,20 @@ struct pruss {
 	struct clk *iep_clk_mux;
 };
 
+#if IS_ENABLED(CONFIG_TI_PRUSS)
+
+struct pruss *pruss_get(struct rproc *rproc);
+void pruss_put(struct pruss *pruss);
+
+#else
+
+static inline struct pruss *pruss_get(struct rproc *rproc)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline void pruss_put(struct pruss *pruss) { }
+
+#endif /* CONFIG_TI_PRUSS */
+
 #endif	/* _PRUSS_DRIVER_H_ */
-- 
2.34.1