Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Ivan Mikhaylov <fr0st61te@gmail.com>
To:     Samuel Mendoza-Jonas <sam@mendozajonas.com>,
        "David S . Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     netdev@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Ivan Mikhaylov <fr0st61te@gmail.com>,
        Paul Fertser <fercerpav@gmail.com>
Subject: [PATCH 3/4] net/ftgmac100: add mac-address-increment option for GMA command from NC-SI
Date:   Thu, 13 Apr 2023 00:29:04 +0000
Message-Id: <20230413002905.5513-4-fr0st61te@gmail.com>
In-Reply-To: <20230413002905.5513-1-fr0st61te@gmail.com>
References: <20230413002905.5513-1-fr0st61te@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add s32 mac-address-increment option for Get MAC Address command from
NC-SI.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
---
 Documentation/devicetree/bindings/net/ftgmac100.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt
index 29234021f601..7ef5329d888d 100644
--- a/Documentation/devicetree/bindings/net/ftgmac100.txt
+++ b/Documentation/devicetree/bindings/net/ftgmac100.txt
@@ -22,6 +22,10 @@ Optional properties:
 - use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes
   rmii (100bT) but kept as a separate property in case NC-SI grows support
   for a gigabit link.
+- mac-address-increment: Increment the MAC address taken by GMA command via
+  NC-SI. Specifies a signed number to be added to the host MAC address as
+  obtained by the OEM GMA command. If not specified, 1 is used by default
+  for Broadcom and Intel network cards, 0 otherwise.
 - no-hw-checksum: Used to disable HW checksum support. Here for backward
   compatibility as the driver now should have correct defaults based on
   the SoC.
-- 
2.40.0