Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 13 Apr 2023 14:54:43 -0400
From:   Adrien Thierry <athierry@redhat.com>
To:     Krishna Kurapati <quic_kriskura@quicinc.com>
Cc:     Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        quic_pkondeti@quicinc.com, quic_ppratap@quicinc.com,
        quic_wcheng@quicinc.com, quic_jackp@quicinc.com,
        quic_harshq@quicinc.com, ahalaney@redhat.com,
        quic_shazhuss@quicinc.com
Subject: Re: [PATCH v6 0/8] Add multiport support for DWC3 controllers
Message-ID: <ZDhP823LUMCDuD9q@fedora>
References: <20230405125759.4201-1-quic_kriskura@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230405125759.4201-1-quic_kriskura@quicinc.com>
Precedence: bulk

Hi,

> Krishna Kurapati (8):
>   dt-bindings: usb: Add bindings for multiport properties on DWC3
>     controller
>   usb: dwc3: core: Access XHCI address space temporarily to read port
>     info
>   usb: dwc3: core: Skip setting event buffers for host only controllers
>   usb: dwc3: core: Refactor PHY logic to support Multiport Controller
>   usb: dwc3: qcom: Add multiport controller support for qcom wrapper
>   arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
>   arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB
>     ports
>   arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb
>     controller
>
>  .../devicetree/bindings/usb/snps,dwc3.yaml    |  13 +-
>  arch/arm64/boot/dts/qcom/sa8295p-adp.dts	 |  47 +++
>  arch/arm64/boot/dts/qcom/sa8540p-ride.dts     |  22 ++
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi        |  58 +++
>  drivers/usb/dwc3/core.c                       | 373 ++++++++++++++----
>  drivers/usb/dwc3/core.h                       |  71 +++-
>  drivers/usb/dwc3/drd.c                        |  13 +-
>  drivers/usb/dwc3/dwc3-qcom.c                  |  28 +-
>  8 files changed, 523 insertions(+), 102 deletions(-)

I tested this series on the sa8540p-ride, with a USB Ethernet adapter
plugged into the board. The device shows up as expected:

# lsusb -tv
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 10000M
    ID 1d6b:0003 Linux Foundation 3.0 root hub
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
        ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/4p, 480M
    ID 1d6b:0002 Linux Foundation 2.0 root hub

Tested-by: Adrien Thierry <athierry@redhat.com> # sa8540p-ride