Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Fabrice Gasnier <fabrice.gasnier@foss.st.com>
To:     <hminas@synopsys.com>, <gregkh@linuxfoundation.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <alexandre.torgue@foss.st.com>
CC:     <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <amelie.delaunay@foss.st.com>, <fabrice.gasnier@foss.st.com>
Subject: [PATCH v2 4/4] ARM: dts: stm32: add USB OTG UTMI clock on stm32mp151
Date:   Fri, 14 Apr 2023 10:41:37 +0200
Message-ID: <20230414084137.1050487-5-fabrice.gasnier@foss.st.com>
In-Reply-To: <20230414084137.1050487-1-fabrice.gasnier@foss.st.com>
References: <20230414084137.1050487-1-fabrice.gasnier@foss.st.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

It's needed on STM32MP15, when using the integrated full-speed PHY. This
clock is an output of USBPHYC, and the HS USBPHYC is not attached as PHY
in this case (managed directly by dwc2 ggpio glue):

    &usbotg_hs {
    	compatible = "st,stm32mp15-fsotg", "snps,dwc2";
    	pinctrl-names = "default";
    	pinctrl-0 = <&usbotg_hs_pins_a &usbotg_fs_dp_dm_pins_a>;
    	vbus-supply = <&vbus_otg>;
    	status = "okay";
    };

USBPHYC clock output must be used, so it can be properly enabled as a
clock provider.

Without this, currently, when the dualport High-Speed USBPHYC isn't
requested by either USBH or OTG, it remains uninitialized when probing
OTG: OTG configured with full-speed PHY isn't properly clocked, resulting
in error log like:
[    2.383138] dwc2 49000000.usb-otg: dwc2_core_reset: HANG! Soft Reset
timeout GRSTCTL_CSFTRST.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
Changes in v2:
- "utmi_clk" renamed "utmi" as per Krzysztof comment on dt-bindings
---
 arch/arm/boot/dts/stm32mp151.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 4e437d3f2ed6..63f4c78fcc1d 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1130,8 +1130,8 @@ sdmmc3: mmc@48004000 {
 		usbotg_hs: usb-otg@49000000 {
 			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
 			reg = <0x49000000 0x10000>;
-			clocks = <&rcc USBO_K>;
-			clock-names = "otg";
+			clocks = <&rcc USBO_K>, <&usbphyc>;
+			clock-names = "otg", "utmi";
 			resets = <&rcc USBO_R>;
 			reset-names = "dwc2";
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.25.1