Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <f9da7499-3fb3-1ce6-db0b-d87febee2052@linaro.org>
Date:   Fri, 14 Apr 2023 17:28:49 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.1
Subject: Re: [PATCH v4 1/2] dt-bindings: leds: Add ROHM BD2606MVV LED driver
Content-Language: en-US
To:     Andreas Kemnade <andreas@kemnade.info>, pavel@ucw.cz,
        lee@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-leds@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Matti Vaittinen <mazziesaccount@gmail.com>
References: <20230414055341.335456-1-andreas@kemnade.info>
 <20230414055341.335456-2-andreas@kemnade.info>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230414055341.335456-2-andreas@kemnade.info>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 14/04/2023 07:53, Andreas Kemnade wrote:
> Document ROHM BD2606MVV LED driver devicetree bindings.

Subject: no improvements and no comments from your side. Why?

> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
> ---
>  .../bindings/leds/rohm,bd2606mvv.yaml         | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
> new file mode 100644
> index 0000000000000..14700a2e5feaa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ROHM BD2606MVV LED controller
> +
> +maintainers:
> +  - Andreas Kemnade <andreas@kemnade.info>
> +
> +description:
> +  The BD2606 MVV is a programmable LED controller connected via I2C that can
> +  drive 6 separate lines. Each of them can be individually switched on and off,
> +  but the brightness setting is shared between pairs of them.
> +
> +  Datasheet is available at
> +  https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
> +
> +properties:
> +  compatible:
> +    const: rohm,bd2606mvv
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  enable-gpios:
> +    maxItems: 1

Drop maxItems. It cannot be different.

> +    description: GPIO pin to enable/disable the device.
> +
Best regards,
Krzysztof