Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Udit Kumar <u-kumar1@ti.com>
To:     <linux-arm-kernel@lists.infradead.org>, <afd@ti.com>, <bb@ti.com>,
        <vaishnav.a@ti.com>, <j-choudhary@ti.com>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <a-govindraju@ti.com>, <kishon@ti.com>
CC:     Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH 2/2] arm64: dts: ti: k3-j7200-common-proc-board: Enable I2C
Date:   Fri, 14 Apr 2023 23:44:34 +0530
Message-ID: <20230414181434.2046049-3-u-kumar1@ti.com>
In-Reply-To: <20230414181434.2046049-1-u-kumar1@ti.com>
References: <20230414181434.2046049-1-u-kumar1@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

All I2C nodes were disabled in SOC dts file and in board
dts needed nodes were enabled.
This patch enables wkup_i2c0 node in board dts file.

Fixes: a9ed915cd55c ("arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level")

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 63633e4f6c59..e66bbfe65ff2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -254,6 +254,10 @@ exp3: gpio@20 {
 	};
 };
 
+&wkup_i2c0 {
+	status = "okay";
+};
+
 &main_sdhci0 {
 	/* eMMC */
 	non-removable;
-- 
2.34.1