Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 14 Apr 2023 17:11:35 -0500
From:   Nishanth Menon <nm@ti.com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CC:     Judith Mendez <jm@ti.com>,
        Chandrasekar Ramakrishnan <rcsekar@samsung.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Andrew Davis <afd@ti.com>,
        Wolfgang Grandegger <wg@grandegger.com>,
        Marc Kleine-Budde <mkl@pengutronix.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        <linux-can@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
        Schuyler Patton <spatton@ti.com>
Subject: Re: [RFC PATCH 4/5] arm64: dts: ti: Enable multiple MCAN for AM62x
 in MCU MCAN overlay
Message-ID: <20230414221135.vifinqboqndxdxzw@embark>
References: <20230413223051.24455-1-jm@ti.com>
 <20230413223051.24455-5-jm@ti.com>
 <9ab56180-328e-1416-56cb-bbf71af0c26d@linaro.org>
 <20230414182925.ya3fe2n6mtyuqotb@detached>
 <342dd9b0-35cd-1715-ee67-6a6628a3a9a6@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <342dd9b0-35cd-1715-ee67-6a6628a3a9a6@linaro.org>
Precedence: bulk

On 22:44-20230414, Krzysztof Kozlowski wrote:
> On 14/04/2023 20:29, Nishanth Menon wrote:
> >>> +
> >>> +&cbass_mcu {
> >>> +	mcu_mcan1: can@4e00000 {
> >>> +		compatible = "bosch,m_can";
> >>> +		reg = <0x00 0x4e00000 0x00 0x8000>,
> >>> +			  <0x00 0x4e08000 0x00 0x200>;
> >>> +		reg-names = "message_ram", "m_can";
> >>> +		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
> >>> +		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
> >>> +		clock-names = "hclk", "cclk";
> >>> +		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
> >>> +		pinctrl-names = "default";
> >>> +		pinctrl-0 = <&mcu_mcan1_pins_default>;
> >>> +		phys = <&transceiver2>;
> >>> +		status = "okay";
> >>
> >> okay is by default. Why do you need it?
> > 
> > mcan is not functional without pinmux, so it has been disabled by
> > default in SoC. this overlay is supposed to enable it. But this is done
> > entirely wrongly.
> 
> Ah, so this is override of existing node? Why not overriding by
> label/phandle?

Yep, that is how it should be done (as every other node is done for
mcan):
a) SoC.dtsi -> introduce mcu_mcan1, disabled since no transciever or
pinmux, set status = "disabled";
b) overlay -> use the label and provide the missing properties, set
status = "okay";

The series definitely needs a respin.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D