Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758032AbXI0PQU (ORCPT ); Thu, 27 Sep 2007 11:16:20 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1756639AbXI0PQI (ORCPT ); Thu, 27 Sep 2007 11:16:08 -0400 Received: from ogre.sisk.pl ([217.79.144.158]:43413 "EHLO ogre.sisk.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755141AbXI0PQE (ORCPT ); Thu, 27 Sep 2007 11:16:04 -0400 From: "Rafael J. Wysocki" To: Andrew Morton Subject: Re: 2.6.23-rc8-mm2: problems on HP nx6325 Date: Thu, 27 Sep 2007 17:19:06 +0200 User-Agent: KMail/1.9.5 Cc: linux-kernel@vger.kernel.org, Thomas Gleixner , David Brownell , Tejun Heo References: <20070927022220.c76a7a6e.akpm@linux-foundation.org> In-Reply-To: <20070927022220.c76a7a6e.akpm@linux-foundation.org> MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_qn8+GOrI9uuMr46" Message-Id: <200709271719.06937.rjw@sisk.pl> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 45525 Lines: 1000 --Boundary-00=_qn8+GOrI9uuMr46 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Thursday, 27 September 2007 11:22, Andrew Morton wrote: > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23-rc8/2.6.23-rc8-mm2/ > > > - The scheduler devel tree has been restored > > - The driver tree is presently busted, so I reverted it to the 2..23-rc8-mm1 > version. > > - It's now a nearly-32MB diff. On HP nx6325: 1) The audio is back (thanks for reverting x86_64-mm-cpa-einval.patch) 2) CPU hotplug is busted (onlining of CPU1 kills the kernel), probably due to the same issue that I'm having with the -hrt version of 2.6.23-rc8 (we're debugging it right now) 3) Some call traces unrelated to 2) appear in dmesg: a) This probably is due to the fact that I've compiled two RTC drivers, by mistake ;-) Duplicate file names "rtc" detected. Call Trace: /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '001' usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.23-rc8-mm2 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 [] proc_register+0x15b/0x173 [] create_proc_entry+0x74/0x89 [] :rtc_core:rtc_proc_add_device+0x25/0x48 [] :rtc_core:rtc_device_register+0x182/0x215 [] sysfs_add_one+0xbf/0xc9 [] :rtc_cmos:cmos_do_probe+0xa5/0x220 [] :rtc_cmos:cmos_pnp_probe+0x41/0x43 [] pnp_device_probe+0x7b/0xa2 [] driver_probe_device+0x100/0x18f [] __driver_attach+0x70/0xae [] __driver_attach+0x0/0xae [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x86/0x1d6 [] driver_register+0x72/0x76 [] pnp_register_driver+0x1c/0x1e [] :rtc_cmos:cmos_init+0x10/0x12 [] sys_init_module+0x16df/0x1864 [] :rtc_core:rtc_device_register+0x0/0x215 [] system_call+0x7e/0x83 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:07 failed with error -16 b) I have no idea what causes these to appear, but the networking works nevertheless: Call Trace: [] sysfs_add_one+0x5c/0xc9 [] sysfs_create_link+0xd1/0x12c [] device_rename+0x17a/0x1db [] dev_change_name+0x13c/0x233 [] dev_ifsioc+0x337/0x403 [] dev_ioctl+0x3b4/0x4cc [] handle_mm_fault+0x1fe/0x6f3 [] __up_read+0x8f/0x97 [] sock_ioctl+0x1fe/0x20c [] do_ioctl+0x2a/0x77 [] vfs_ioctl+0x251/0x26e [] sys_ioctl+0x57/0x7b [] system_call+0x7e/0x83 net ethxx0: device_rename: sysfs_create_symlink failed (-17) [--snip--] WARNING: at /home/rafael/src/mm/linux-2.6.23-rc8-mm2/fs/sysfs/dir.c:433 sysfs_ad d_one() Call Trace: [] sysfs_add_one+0x5c/0xc9 [] sysfs_create_link+0xd1/0x12c ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PE S CCS [] device_rename+0x17a/0x1db [] dev_change_name+0x13c/0x233 [] dev_ifsioc+0x337/0x403 usb 3-1: new full speed USB device using ohci_hcd and address 2 [] dev_ioctl+0x3b4/0x4cc [] handle_mm_fault+0x1fe/0x6f3 [] __up_read+0x8f/0x97 [] sock_ioctl+0x1fe/0x20c ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PE S CCS [] do_ioctl+0x2a/0x77 [] vfs_ioctl+0x251/0x26e [] sys_ioctl+0x57/0x7b [] system_call+0x7e/0x83 usb 3-1: ep0 maxpacket = 8 usb 3-1: default language 0x0409 net ethxx1: device_rename: sysfs_create_symlink failed (-17) [--snip--] ethxx0 renamed to eth1 sysfs: duplicate filename 'eth1' can not be created WARNING: at /home/rafael/src/mm/linux-2.6.23-rc8-mm2/fs/sysfs/dir.c:433 sysfs_ad d_one() Call Trace: [] sysfs_add_one+0x5c/0xc9 [] sysfs_create_link+0xd1/0x12c [] device_rename+0x17a/0x1db [] dev_change_name+0x13c/0x233 [] dev_ifsioc+0x337/0x403 [] dev_ioctl+0x3b4/0x4cc [] handle_mm_fault+0x1fe/0x6f3 [] __up_read+0x8f/0x97 [] sock_ioctl+0x1fe/0x20c [] do_ioctl+0x2a/0x77 [] vfs_ioctl+0x251/0x26e [] sys_ioctl+0x57/0x7b [] system_call+0x7e/0x83 net eth1: device_rename: sysfs_create_symlink failed (-17) ethxx1 renamed to eth0 hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 Bluetooth: Core ver 2.11 sysfs: duplicate filename 'eth0' can not be created WARNING: at /home/rafael/src/mm/linux-2.6.23-rc8-mm2/fs/sysfs/dir.c:433 sysfs_ad d_one() Call Trace: [] sysfs_add_one+0x5c/0xc9 [] sysfs_create_link+0xd1/0x12c [] device_rename+0x17a/0x1db [] dev_change_name+0x13c/0x233 [] dev_ifsioc+0x337/0x403 [] dev_ioctl+0x3b4/0x4cc [] handle_mm_fault+0x1fe/0x6f3 [] __up_read+0x8f/0x97 [] sock_ioctl+0x1fe/0x20c [] do_ioctl+0x2a/0x77 [] vfs_ioctl+0x251/0x26e [] sys_ioctl+0x57/0x7b [] system_call+0x7e/0x83 net eth0: device_rename: sysfs_create_symlink failed (-17) Full dmesg attached. Greetings, Rafael --Boundary-00=_qn8+GOrI9uuMr46 Content-Type: text/x-log; charset="iso-8859-1"; name="2.6.23-rc8-mm2-boot.log" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="2.6.23-rc8-mm2-boot.log" Linux version 2.6.23-rc8-mm2 (rafael@albercik) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #23 SMP Thu Sep 27 14:51:09 CEST 2007 Command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable) BIOS-e820: 0000000077fd0000 - 0000000077fe5600 (reserved) BIOS-e820: 0000000077fe5600 - 0000000077ff8000 (ACPI NVS) BIOS-e820: 0000000077ff8000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 491472) 1 entries of 256 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000F7D30, 0024 (r2 HP ) ACPI: XSDT 77FE57B4, 0054 (r1 HP 0944 6070620 HP 1) ACPI: FACP 77FE5684, 00F4 (r4 HP 0944 3 HP 1) ACPI: DSDT 77FE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E) ACPI: FACS 77FF7E80, 0040 ACPI: APIC 77FE5808, 0062 (r1 HP 0944 1 HP 1) ACPI: MCFG 77FE586C, 003C (r1 HP 0944 1 HP 1) ACPI: TCPA 77FE58A8, 0032 (r2 HP 0944 1 HP 1) ACPI: SSDT 77FF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E) ACPI: SSDT 77FF47AF, 0206 (r1 HP PSSTBLID 1 HP 1) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 491472) 1 entries of 256 used No mptable found. sizeof(struct page) = 56 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 491472 On node 0 totalpages: 491375 Node 0 memmap at 0xffff810001000000 size 27525120 first pfn 0xffff810001000000 DMA zone: 56 pages used for memmap DMA zone: 1476 pages reserved DMA zone: 2467 pages, LIFO batch:0 DMA32 zone: 6663 pages used for memmap DMA32 zone: 480713 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 46448 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 483180 Kernel command line: root=/dev/sda3 vga=792 resume=/dev/sda1 no_console_suspend Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1994.999 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... CPU 0: aperture @ 148000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 1923936k/1965888k available (2269k kernel code, 41308k reserved, 1511k data, 252k init) Calibrating delay using timer specific routine.. 3994.09 BogoMIPS (lpj=7988193) Security Framework initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ..MP-BIOS bug: 8254 timer not connected to IO-APIC Disabling APIC timer SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.39 BogoMIPS (lpj=7980790) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 Brought up 2 CPUs net_namespace: 112 bytes Time: 14:56:28 Date: 09/27/07 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................ Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:....... Executed 7 _INI methods requiring 2 _STA executions (examined 120 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base 3758096384 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff PCI: No mmconfig possible on device 00:18 ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: PCI Root Bridge [C074] (0000:00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT] ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12C] (IRQs *10 11) ACPI: Power Resource [C223] (off) ACPI: Power Resource [C1FE] (off) ACPI: Power Resource [C217] (on) ACPI: Power Resource [C34B] (off) ACPI: Power Resource [C34C] (off) ACPI: Power Resource [C34D] (off) ACPI: Power Resource [C34E] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:14.2 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:No DMAR devices found ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0x77ffffff could not be reserved pnp: 00:0a: ioport range 0x40b-0x40b has been reserved pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0a: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved pnp: 00:0b: ioport range 0x8000-0x802f has been reserved pnp: 00:0b: ioport range 0x8100-0x811f has been reserved pnp: 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:0c: iomem range 0xcf000-0xcffff has been reserved pnp: 00:0c: iomem range 0x78000000-0x7fffffff could not be reserved pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 6000-6fff MEM window: d4300000-d43fffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:04.0 IO window: 4000-5fff MEM window: d0000000-d3ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: 2000-3fff MEM window: cc000000-cfffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: c8000000-c80fffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 88000000-8bffffff MEM window: 90000000-93ffffff PCI: Bridge: 0000:00:14.4 IO window: 1000-1fff MEM window: d4000000-d42fffff PREFETCH window: 88000000-8bffffff PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5249k freed audit: initializing netlink socket (disabled) audit(1190904988.972:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. MSI deactivated. Boot video device is 0000:01:05.0 PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] Allocate Port Service[0000:00:04.0:pcie03] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] Allocate Port Service[0000:00:05.0:pcie03] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] Allocate Port Service[0000:00:06.0:pcie03] AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 4608k, total 16384k vesafb: mode is 1024x768x24, linelength=3072, pages=6 vesafb: scrolling: redraw vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize sata_sil 0000:00:12.0: version 2.3 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd4409080 irq 16 ata2: SATA max UDMA/100 mmio m512@0xd4409000 tf 0xd44090c0 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHV2080BH, 892C, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 NET: Registered protocol family 1 swsusp: Resume From Partition /dev/sda1 PM: Checking swsusp image. PM: Resume from disk failed. registered taskstats version 1 Magic number: 7:423:941 Freeing unused kernel memory: 252k freed Write protecting the kernel read-only data: 1116k sd 0:0:0:0: Attached scsi generic sg0 type 0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ATIIXP: chipset revision 128 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio ATIIXP: simplex device: DMA disabled ide1: ATIIXP Bus-Master DMA disabled (BIOS) Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: selected mode 0x22 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... BIOS EDD facility v0.16 2004-Jun-25, 6 devices found swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed Attempting manual resume swsusp: Resume From Partition 8:1 PM: Checking swsusp image. PM: Resume from disk failed. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Floppy drive(s): fd0 is 1.44M usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file 'devices' /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: reset hcs_params 0x2408 dbg=0 cc=2 pcc=4 ordered !ppc ports=8 ehci_hcd 0000:00:13.2: reset hcc_params a012 thresh 1 uframes 256/512/1024 ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:13.2: MWI active ehci_hcd 0000:00:13.2: irq 19, io mem 0xd4403000 ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub pci_hotplug: PCI Hot Plug PCI Core version: 0.5 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '001' usb usb1: new device found, idVendor=0000, idProduct=0000 ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.23-rc8-mm2 ehci_hcd usb usb1: SerialNumber: 0000:00:13.2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 80 td 96 ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.0: OHCI Host Controller /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '002' ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: created debug files ohci_hcd 0000:00:13.0: irq 19, io mem 0xd4401000 ieee80211_crypt: registered algorithm 'NULL' hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 ieee80211: 802.11 data/management/control stack, git-1.1.13 ohci_hcd 0000:00:13.0: OHCI controller state ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH ohci_hcd 0000:00:13.0: hcca frame #0005 ohci_hcd 0000:00:13.0: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00010100 CSC PPS ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 4ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:13.2: port 2 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s ieee80211: Copyright (C) 2004-2005 Intel Corporation /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '001' usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.23-rc8-mm2 ohci_hcd usb usb2: SerialNumber: 0000:00:13.0 ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: OHCI Host Controller /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '003' ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: created debug files ohci_hcd 0000:00:13.1: irq 19, io mem 0xd4402000 hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 ohci_hcd 0000:00:13.1: OHCI controller state ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH ohci_hcd 0000:00:13.1: hcca frame #0005 ohci_hcd 0000:00:13.1: roothub.a 02000204 POTPGT=2 NPS NDP=4(4) ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00010100 CSC PPS ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00010100 CSC PPS ohci_hcd 0000:00:13.1: roothub.portstatus [3] 0x00000100 PPS usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found ehci_hcd 0000:00:13.2: port 3 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT hub 3-0:1.0: 4 ports detected hub 1-0:1.0: port 3 not reset yet, waiting 50ms hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: global over-current protection hub 3-0:1.0: power on to power good time: 4ms hub 3-0:1.0: local power source is good hub 3-0:1.0: no over-current condition exists hub 3-0:1.0: trying to enable port power on non-switchable hub ehci_hcd 0000:00:13.2: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC ehci_hcd 0000:00:13.2: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s Duplicate file names "rtc" detected. Call Trace: /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '001' usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.23-rc8-mm2 ohci_hcd usb usb3: SerialNumber: 0000:00:13.1 [] proc_register+0x15b/0x173 [] create_proc_entry+0x74/0x89 [] :rtc_core:rtc_proc_add_device+0x25/0x48 [] :rtc_core:rtc_device_register+0x182/0x215 [] sysfs_add_one+0xbf/0xc9 [] :rtc_cmos:cmos_do_probe+0xa5/0x220 [] :rtc_cmos:cmos_pnp_probe+0x41/0x43 [] pnp_device_probe+0x7b/0xa2 [] driver_probe_device+0x100/0x18f [] __driver_attach+0x70/0xae [] __driver_attach+0x0/0xae [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x86/0x1d6 [] driver_register+0x72/0x76 [] pnp_register_driver+0x1c/0x1e [] :rtc_cmos:cmos_init+0x10/0x12 [] sys_init_module+0x16df/0x1864 [] :rtc_core:rtc_device_register+0x0/0x215 [] system_call+0x7e/0x83 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:07 failed with error -16 hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 ehci_hcd 0000:00:13.2: port 6 low speed --> companion piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device ehci_hcd 0000:00:13.2: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0044 ehci_hcd 0000:00:13.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 bcm43xx driver ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 PCI: Setting latency timer of device 0000:30:00.0 to 64 bcm43xx: Chip ID 0x4311, rev 0x1 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0x11, vendor 0x4243 bcm43xx: Core 1: ID 0x812, rev 0xa, vendor 0x4243 bcm43xx: Core 2: ID 0x817, rev 0x3, vendor 0x4243 bcm43xx: Core 3: ID 0x820, rev 0x1, vendor 0x4243 ehci_hcd 0000:00:13.2: port 2 full speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 4, Type 2, Revision 8 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio initialized ehci_hcd 0000:00:13.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s bcm43xx: Radio initialized tg3.c:v3.81 (September 5, 2007) ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23 eth1: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:2e:2e:f3 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth1: dma_rwctrl[763f0000] dma_mask[32-bit] ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20 hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d4011000-d40117ff] Max Packet=[2048] IR/IT contexts=[4/8] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0] Yenta: Enabling burst memory read transactions Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI usb 2-2: new full speed USB device using ohci_hcd and address 2 Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ohci_hcd 0000:00:13.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS eth0 renamed to ethxx0 sysfs: duplicate filename 'ethxx0' can not be created floppy0: no floppy controllers found usb 2-2: skipped 1 descriptor after interface usb 2-2: default language 0x0409 WARNING: at /home/rafael/src/mm/linux-2.6.23-rc8-mm2/fs/sysfs/dir.c:433 sysfs_add_one() Yenta: ISA IRQ mask 0x0eb8, PCI irq 20 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd42fffff pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff Call Trace: [] sysfs_add_one+0x5c/0xc9 [] sysfs_create_link+0xd1/0x12c [] device_rename+0x17a/0x1db [] dev_change_name+0x13c/0x233 [] dev_ifsioc+0x337/0x403 [] dev_ioctl+0x3b4/0x4cc [] handle_mm_fault+0x1fe/0x6f3 [] __up_read+0x8f/0x97 [] sock_ioctl+0x1fe/0x20c [] do_ioctl+0x2a/0x77 [] vfs_ioctl+0x251/0x26e [] sys_ioctl+0x57/0x7b [] system_call+0x7e/0x83 net ethxx0: device_rename: sysfs_create_symlink failed (-17) usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0) usb 2-2: adding 2-2:1.0 (config #1, interface 0) ACPI: PCI Interrupt 0000:02:04.3[A] -> <7>usb 2-2:1.0: uevent usb 2-2:1.0: uevent usb 2-2: adding 2-2:1.1 (config #1, interface 1) usb 2-2:1.1: uevent usb 2-2:1.1: uevent usb 2-2: adding 2-2:1.2 (config #1, interface 2) usb 2-2:1.2: uevent usb 2-2:1.2: uevent usb 2-2: adding 2-2:1.3 (config #1, interface 3) usb 2-2:1.3: uevent usb 2-2:1.3: uevent /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '002' usb 2-2: new device found, idVendor=03f0, idProduct=171d usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: HP Integrated Module usb 2-2: Manufacturer: Broadcom Corp hub 3-0:1.0: state 7 ports 4 chg 0000 evt 000a ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s GSI 20 (level, low) -> IRQ 20 mmc0: SDHCI at 0xd4019000 irq 20 PIO ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f9929613f0c] eth1 renamed to ethxx1 sysfs: duplicate filename 'ethxx1' can not be created hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 WARNING: at /home/rafael/src/mm/linux-2.6.23-rc8-mm2/fs/sysfs/dir.c:433 sysfs_add_one() Call Trace: [] sysfs_add_one+0x5c/0xc9 [] sysfs_create_link+0xd1/0x12c ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [] device_rename+0x17a/0x1db [] dev_change_name+0x13c/0x233 [] dev_ifsioc+0x337/0x403 usb 3-1: new full speed USB device using ohci_hcd and address 2 [] dev_ioctl+0x3b4/0x4cc [] handle_mm_fault+0x1fe/0x6f3 [] __up_read+0x8f/0x97 [] sock_ioctl+0x1fe/0x20c ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [] do_ioctl+0x2a/0x77 [] vfs_ioctl+0x251/0x26e [] sys_ioctl+0x57/0x7b [] system_call+0x7e/0x83 usb 3-1: ep0 maxpacket = 8 usb 3-1: default language 0x0409 net ethxx1: device_rename: sysfs_create_symlink failed (-17) usb 3-1: uevent usb 3-1: usb_probe_device usb 3-1: configuration #1 chosen from 1 choice usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: uevent usb 3-1:1.0: uevent /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '002' usb 3-1: new device found, idVendor=08ff, idProduct=2580 usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: Product: Fingerprint Sensor ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS hub 3-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s ethxx0 renamed to eth1 sysfs: duplicate filename 'eth1' can not be created WARNING: at /home/rafael/src/mm/linux-2.6.23-rc8-mm2/fs/sysfs/dir.c:433 sysfs_add_one() Call Trace: [] sysfs_add_one+0x5c/0xc9 [] sysfs_create_link+0xd1/0x12c [] device_rename+0x17a/0x1db [] dev_change_name+0x13c/0x233 [] dev_ifsioc+0x337/0x403 [] dev_ioctl+0x3b4/0x4cc [] handle_mm_fault+0x1fe/0x6f3 [] __up_read+0x8f/0x97 [] sock_ioctl+0x1fe/0x20c [] do_ioctl+0x2a/0x77 [] vfs_ioctl+0x251/0x26e [] sys_ioctl+0x57/0x7b [] system_call+0x7e/0x83 net eth1: device_rename: sysfs_create_symlink failed (-17) ethxx1 renamed to eth0 hub 3-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 Bluetooth: Core ver 2.11 sysfs: duplicate filename 'eth0' can not be created WARNING: at /home/rafael/src/mm/linux-2.6.23-rc8-mm2/fs/sysfs/dir.c:433 sysfs_add_one() Call Trace: [] sysfs_add_one+0x5c/0xc9 [] sysfs_create_link+0xd1/0x12c [] device_rename+0x17a/0x1db [] dev_change_name+0x13c/0x233 [] dev_ifsioc+0x337/0x403 [] dev_ioctl+0x3b4/0x4cc [] handle_mm_fault+0x1fe/0x6f3 [] __up_read+0x8f/0x97 [] sock_ioctl+0x1fe/0x20c [] do_ioctl+0x2a/0x77 [] vfs_ioctl+0x251/0x26e [] sys_ioctl+0x57/0x7b [] system_call+0x7e/0x83 net eth0: device_rename: sysfs_create_symlink failed (-17) NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: new low speed USB device using ohci_hcd and address 3 ohci_hcd 0000:00:13.1: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS usb 3-3: skipped 1 descriptor after interface usb 3-3: skipped 1 descriptor after interface usb 3-3: default language 0x0409 usb 3-3: uevent usb 3-3: usb_probe_device usb 3-3: configuration #1 chosen from 1 choice usb 3-3: adding 3-3:1.0 (config #1, interface 0) usb 3-3:1.0: uevent usb 3-3:1.0: uevent usb 3-3: adding 3-3:1.1 (config #1, interface 1) usb 3-3:1.1: uevent usb 3-3:1.1: uevent /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/inode.c: creating file '003' usb 3-3: new device found, idVendor=046d, idProduct=c521 usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-3: Product: USB Receiver usb 3-3: Manufacturer: Logitech hci_usb 2-2:1.0: usb_probe_interface hci_usb 2-2:1.0: usb_probe_interface - got id hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0004 hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0004 hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0002 hci_usb 2-2:1.2: usb_probe_interface hci_usb 2-2:1.2: usb_probe_interface - got id hci_usb 2-2:1.3: usb_probe_interface hci_usb 2-2:1.3: usb_probe_interface - got id usbcore: registered new interface driver hci_usb usbcore: registered new interface driver hiddev usbhid 3-3:1.0: usb_probe_interface usbhid 3-3:1.0: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input2 input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-3 usbhid 3-3:1.1: usb_probe_interface usbhid 3-3:1.1: usb_probe_interface - got id input: Logitech USB Receiver as /class/input/input3 /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/usb/core/file.c: looking for a minor, starting at 96 input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-3 usbcore: registered new interface driver usbhid /home/rafael/src/mm/linux-2.6.23-rc8-mm2/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input4 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend ehci_hcd 0000:00:13.2: suspend root hub device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1 across:1052216k NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ACPI: AC Adapter [C1BD] (on-line) ACPI: Battery Slot [C1BF] (battery present) ACPI: Battery Slot [C1BE] (battery absent) input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [C25A] input: Lid Switch as /class/input/input7 ACPI: Lid Switch [C25B] ACPI: Transitioning device [C34F] to D3 ACPI: Transitioning device [C34F] to D3 ACPI: Fan [C34F] (off) ACPI: Transitioning device [C350] to D3 ACPI: Transitioning device [C350] to D3 ACPI: Fan [C350] (off) ACPI: Transitioning device [C351] to D3 ACPI: Transitioning device [C351] to D3 ACPI: Fan [C351] (off) ACPI: Transitioning device [C352] to D3 ACPI: Transitioning device [C352] to D3 ACPI: Fan [C352] (off) ACPI: Processor [C000] (supports 8 throttling states) ACPI: Processor [C001] (supports 8 throttling states) ACPI: Thermal Zone [TZ1] (62 C) ACPI: Thermal Zone [TZ2] (53 C) ACPI: Thermal Zone [TZ3] (32 C) powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17 powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e powernow-k8: ph2 null fid transition 0xc mtrr: no more MTRRs available APIC error on CPU0: 00(40) APIC error on CPU1: 00(40) --Boundary-00=_qn8+GOrI9uuMr46-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/