Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 18 Apr 2023 07:14:46 -0500
From:   Nishanth Menon <nm@ti.com>
To:     Udit Kumar <u-kumar1@ti.com>
CC:     <linux-arm-kernel@lists.infradead.org>, <afd@ti.com>, <bb@ti.com>,
        <vaishnav.a@ti.com>, <j-choudhary@ti.com>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <vigneshr@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>
Subject: Re: [PATCH v2 2/2] arm64: dts: ti: k3-j7200-som: Enable I2C
Message-ID: <20230418121446.wv5sng7i7n56yrtd@granny>
References: <20230418050514.2392717-1-u-kumar1@ti.com>
 <20230418050514.2392717-3-u-kumar1@ti.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <20230418050514.2392717-3-u-kumar1@ti.com>
Precedence: bulk

On 10:35-20230418, Udit Kumar wrote:
> This patch enables wkup_i2c0 node in board dts file.
> and underneath eeprom CAV24C256WE.
> 
> J7200 User Guide (Section 4.3, Table 4-2) :
> https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf
> 
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> index fa44ed4c17d5..137492ae89c4 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
> @@ -214,6 +214,14 @@ exp_som: gpio@21 {
>  	};
>  };
>  
> +&wkup_i2c0 {
> +	status = "okay";
> +	eeprom@50 {
> +		compatible = "atmel,24c256";
> +		reg = <0x50>;
> +	};
> +};

pinmux?
speed ?

> +
>  &ospi0 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D