Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sai Krishna <saikrishnag@marvell.com>
To:     <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
        <pabeni@redhat.com>, <netdev@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <simon.horman@corigine.com>,
        <leon@kernel.org>, <sgoutham@marvell.com>, <gakula@marvell.com>,
        <lcherian@marvell.com>, <jerinj@marvell.com>, <hkelam@marvell.com>,
        <sbhatta@marvell.com>
CC:     Sai Krishna <saikrishnag@marvell.com>
Subject: [net PATCH v3 10/10] octeontx2-pf: Disable packet I/O for graceful exit
Date:   Wed, 19 Apr 2023 11:50:18 +0530
Message-ID: <20230419062018.286136-11-saikrishnag@marvell.com>
In-Reply-To: <20230419062018.286136-1-saikrishnag@marvell.com>
References: <20230419062018.286136-1-saikrishnag@marvell.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Subbaraya Sundeep <sbhatta@marvell.com>

At the stage of enabling packet I/O in otx2_open, If mailbox
timeout occurs then interface ends up in down state where as
hardware packet I/O is enabled. Hence disable packet I/O also
before bailing out.

Fixes: 1ea0166da050 ("octeontx2-pf: Fix the device state on error")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 11 ++++++++++-
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c |  2 +-
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 179433d0a54a..52a57d2493dc 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1835,13 +1835,22 @@ int otx2_open(struct net_device *netdev)
 		otx2_dmacflt_reinstall_flows(pf);
 
 	err = otx2_rxtx_enable(pf, true);
-	if (err)
+	/* If a mbox communication error happens at this point then interface
+	 * will end up in a state such that it is in down state but hardware
+	 * mcam entries are enabled to receive the packets. Hence disable the
+	 * packet I/O.
+	 */
+	if (err == EIO)
+		goto err_disable_rxtx;
+	else if (err)
 		goto err_tx_stop_queues;
 
 	otx2_do_set_rx_mode(pf);
 
 	return 0;
 
+err_disable_rxtx:
+	otx2_rxtx_enable(pf, false);
 err_tx_stop_queues:
 	netif_tx_stop_all_queues(netdev);
 	netif_carrier_off(netdev);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
index ab126f8706c7..53366dbfbf27 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
@@ -621,7 +621,7 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	err = otx2vf_realloc_msix_vectors(vf);
 	if (err)
-		goto err_mbox_destroy;
+		goto err_detach_rsrc;
 
 	err = otx2_set_real_num_queues(netdev, qcount, qcount);
 	if (err)
-- 
2.25.1