Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 06/10] ARM: dts: qcom: ipq8064: correct LED node names
Date:   Thu, 20 Apr 2023 09:50:49 +0200
Message-Id: <20230420075053.41976-6-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230420075053.41976-1-krzysztof.kozlowski@linaro.org>
References: <20230420075053.41976-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

GPIO LEDs is not a bus, so drop unit-address and also start suffix
numbering from 0:

  Warning (unit_address_vs_reg): /soc/leds/led@7: node has a unit name, but no reg or ranges property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts |  2 +-
 arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi  | 10 +++++-----
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 47a5d1849c72..52eadefd2fb4 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -203,7 +203,7 @@ leds {
 			pinctrl-0 = <&leds_pins>;
 			pinctrl-names = "default";
 
-			led@7 {
+			led-0 {
 				label = "rb3011:green:user";
 				color = <LED_COLOR_ID_GREEN>;
 				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 411c8d63c38e..c5abe7151f14 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -92,34 +92,34 @@ leds {
 			pinctrl-0 = <&leds_pins>;
 			pinctrl-names = "default";
 
-			led@7 {
+			led-0 {
 				label = "led_usb1";
 				gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "usbdev";
 				default-state = "off";
 			};
 
-			led@8 {
+			led-1 {
 				label = "led_usb3";
 				gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "usbdev";
 				default-state = "off";
 			};
 
-			led@9 {
+			led-2 {
 				label = "status_led_fail";
 				function = LED_FUNCTION_STATUS;
 				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 
-			led@26 {
+			led-3 {
 				label = "sata_led";
 				gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 
-			led@53 {
+			led-4 {
 				label = "status_led_pass";
 				function = LED_FUNCTION_STATUS;
 				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-- 
2.34.1