Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20230420125941.333675-1-kai.heng.feng@canonical.com>
 <20230420125941.333675-3-kai.heng.feng@canonical.com> <f1409ba9-5370-1e0d-8b6c-e9782505937f@linux.intel.com>
In-Reply-To: <f1409ba9-5370-1e0d-8b6c-e9782505937f@linux.intel.com>
From:   Kai-Heng Feng <kai.heng.feng@canonical.com>
Date:   Fri, 21 Apr 2023 13:32:12 +0800
Message-ID: <CAAd53p4chNHrHA8RhSjQYH4znVXHZHJ4m4JrzFiOsun_JsegXA@mail.gmail.com>
Subject: Re: [PATCH v3 3/4] PCI/AER: Disable AER interrupt on suspend
To:     Sathyanarayanan Kuppuswamy 
        <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc:     bhelgaas@google.com, mika.westerberg@linux.intel.com,
        koba.ko@canonical.com, Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
        "Oliver O'Halloran" <oohall@gmail.com>,
        linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
        linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

On Thu, Apr 20, 2023 at 10:53=E2=80=AFPM Sathyanarayanan Kuppuswamy
<sathyanarayanan.kuppuswamy@linux.intel.com> wrote:
>
>
>
> On 4/20/23 5:59 AM, Kai-Heng Feng wrote:
> > PCIe service that shares IRQ with PME may cause spurious wakeup on
> > system suspend.
> >
> > PCIe Base Spec 5.0, section 5.2 "Link State Power Management" states
> > that TLP and DLLP transmission is disabled for a Link in L2/L3 Ready
> > (D3hot), L2 (D3cold with aux power) and L3 (D3cold), so we don't lose
> > much here to disable AER during system suspend.
> >
> > This is very similar to previous attempts to suspend AER and DPC [1],
> > but with a different reason.
> >
> > [1] https://lore.kernel.org/linux-pci/20220408153159.106741-1-kai.heng.=
feng@canonical.com/
> > Link: https://bugzilla.kernel.org/show_bug.cgi?id=3D216295
> >
> > Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> > ---
>
> In Patch #1, you skip clearing AER errors in the resume path, right? So i=
f we disable
> interrupts here, will AER driver not be notified on resume path error?

I agree the driver should report the error via aer_isr_one_error() on
resume path.
But on the system I am using (Intel ADL PCH), once the interrupt is
disabled, PCI_ERR_ROOT_STATUS doesn't record error anymore.
Not sure if it's intended though.

Kai-Heng

>
> > v3:
> >  - No change.
> >
> > v2:
> >  - Only disable AER IRQ.
> >  - No more check on PME IRQ#.
> >  - Use helper.
> >
> >  drivers/pci/pcie/aer.c | 22 ++++++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> >
> > diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> > index 1420e1f27105..9c07fdbeb52d 100644
> > --- a/drivers/pci/pcie/aer.c
> > +++ b/drivers/pci/pcie/aer.c
> > @@ -1356,6 +1356,26 @@ static int aer_probe(struct pcie_device *dev)
> >       return 0;
> >  }
> >
> > +static int aer_suspend(struct pcie_device *dev)
> > +{
> > +     struct aer_rpc *rpc =3D get_service_data(dev);
> > +     struct pci_dev *pdev =3D rpc->rpd;
> > +
> > +     aer_disable_irq(pdev);
> > +
> > +     return 0;
> > +}
> > +
> > +static int aer_resume(struct pcie_device *dev)
> > +{
> > +     struct aer_rpc *rpc =3D get_service_data(dev);
> > +     struct pci_dev *pdev =3D rpc->rpd;
> > +
> > +     aer_enable_irq(pdev);
> > +
> > +     return 0;
> > +}
> > +
> >  /**
> >   * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
> >   * @dev: pointer to Root Port, RCEC, or RCiEP
> > @@ -1420,6 +1440,8 @@ static struct pcie_port_service_driver aerdriver =
=3D {
> >       .service        =3D PCIE_PORT_SERVICE_AER,
> >
> >       .probe          =3D aer_probe,
> > +     .suspend        =3D aer_suspend,
> > +     .resume         =3D aer_resume,
> >       .remove         =3D aer_remove,
> >  };
> >
>
> --
> Sathyanarayanan Kuppuswamy
> Linux Kernel Developer