Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <62df2f48-2553-72f0-43e4-9a5d4027ab81@linaro.org>
Date:   Sat, 22 Apr 2023 00:13:30 +0300
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.0
Subject: Re: [PATCH v1 4/5] drm/msm/dpu: calculate DSC encoder parameters
 dynamically
Content-Language: en-GB
To:     Kuogee Hsieh <quic_khsieh@quicinc.com>,
        dri-devel@lists.freedesktop.org, robdclark@gmail.com,
        sean@poorly.run, swboyd@chromium.org, dianders@chromium.org,
        vkoul@kernel.org, daniel@ffwll.ch, airlied@gmail.com,
        agross@kernel.org, andersson@kernel.org
Cc:     quic_abhinavk@quicinc.com, quic_sbillaka@quicinc.com,
        marijn.suijten@somainline.org, freedreno@lists.freedesktop.org,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
References: <1682033114-28483-1-git-send-email-quic_khsieh@quicinc.com>
 <1682033114-28483-5-git-send-email-quic_khsieh@quicinc.com>
 <c8089d0f-c8cd-6a24-718f-682145d04f02@linaro.org>
 <95a37ba2-29b5-47b9-48df-1bd4e4c409c5@quicinc.com>
From:   Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In-Reply-To: <95a37ba2-29b5-47b9-48df-1bd4e4c409c5@quicinc.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 22/04/2023 00:07, Kuogee Hsieh wrote:
> 
> On 4/20/2023 5:27 PM, Dmitry Baryshkov wrote:
>> On 21/04/2023 02:25, Kuogee Hsieh wrote:
>>> During DSC preparation, add run time calculation to figure out what
>>> usage modes, split mode and merge mode, is going to be setup.
>>>
>>> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
>>> ---
>>>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 56 
>>> ++++++++++++++++-------------
>>>   1 file changed, 32 insertions(+), 24 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c 
>>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>>> index 2fdacf1..5677728 100644
>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
>>> @@ -529,17 +529,9 @@ void dpu_encoder_helper_split_config(
>>>   bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc)
>>>   {
>>>       struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
>>> -    int i, intf_count = 0, num_dsc = 0;
>>> +    struct msm_display_topology *topology = &dpu_enc->topology;
>>>   -    for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
>>> -        if (dpu_enc->phys_encs[i])
>>> -            intf_count++;
>>> -
>>> -    /* See dpu_encoder_get_topology, we only support 2:2:1 topology */
>>> -    if (dpu_enc->dsc)
>>> -        num_dsc = 2;
>>> -
>>> -    return (num_dsc > 0) && (num_dsc > intf_count);
>>> +    return (topology->num_dsc > topology->num_intf);
>>>   }
>>>     static void dpu_encoder_get_topology(
>>> @@ -1861,41 +1853,57 @@ static void dpu_encoder_prep_dsc(struct 
>>> dpu_encoder_virt *dpu_enc,
>>>       struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
>>>       struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
>>>       struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
>>> +    struct msm_display_topology *topology = &dpu_enc->topology;
>>>       int this_frame_slices;
>>>       int intf_ip_w, enc_ip_w;
>>> -    int dsc_common_mode;
>>> +    int dsc_common_mode = 0;
>>>       int pic_width;
>>>       u32 initial_lines;
>>> +    int num_dsc, num_intf;
>>>       int i;
>>>         for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
>>>           hw_pp[i] = dpu_enc->hw_pp[i];
>>>           hw_dsc[i] = dpu_enc->hw_dsc[i];
>>> -
>>> -        if (!hw_pp[i] || !hw_dsc[i]) {
>>> -            DPU_ERROR_ENC(dpu_enc, "invalid params for DSC\n");
>>> -            return;
>>> -        }
>>
> Why?
> 
> MAX_CHANNELS_PER_ENC == 2
> 
> This works for dsi since it use 2 dsc encoder.
> 
> Since DP only use one dsc encoder, this will cause it return at loop 2 
> without execute dpu_encoder_dsc_pipe_cfg().

Then the loop should go up to num_dsc rather than MAX_CHANNELS_PER_ENC

> 
>>
>>>       }
>>>   -    dsc_common_mode = 0;
>>> +    num_dsc = topology->num_dsc;
>>> +    num_intf = topology->num_intf;
>>> +
>>>       pic_width = dsc->pic_width;
>>>   -    dsc_common_mode = DSC_MODE_MULTIPLEX | DSC_MODE_SPLIT_PANEL;
>>>       if (enc_master->intf_mode == INTF_MODE_VIDEO)
>>>           dsc_common_mode |= DSC_MODE_VIDEO;
>>>   +    /*
>>> +     * If this encoder is driving more than one DSC encoder, they
>>> +     * operate in tandem, same pic dimension needs to be used by
>>> +     * each of them.(pp-split is assumed to be not supported)
>>> +     *
>>> +     */
>>> +
>>>       this_frame_slices = pic_width / dsc->slice_width;
>>>       intf_ip_w = this_frame_slices * dsc->slice_width;
>>> +    enc_ip_w = intf_ip_w;
>>> +
>>> +    intf_ip_w /= num_intf;
>>> +
>>> +    if (num_dsc > 1)
>>> +        dsc_common_mode |= DSC_MODE_SPLIT_PANEL;
>>> +
>>> +    if (dpu_encoder_use_dsc_merge(&dpu_enc->base)) {
>>> +        dsc_common_mode |= DSC_MODE_MULTIPLEX;
>>> +        /*
>>> +         * in dsc merge case: when using 2 encoders for the same
>>> +         * stream, no. of slices need to be same on both the
>>> +         * encoders.
>>> +         */
>>> +        enc_ip_w = intf_ip_w / 2;
>>
>> So do you want to get enc_ip_w / 2 or enc_ip_w / num_intf / 2 here?
> enc_ip_w / num_intf / 2

But previously we had enc_ip_w = intf_ip_w / 2. Was it because of the 
assumption that num_intf = 1?

>>
>>> +    }
>>>   -    /*
>>> -     * dsc merge case: when using 2 encoders for the same stream,
>>> -     * no. of slices need to be same on both the encoders.
>>> -     */
>>> -    enc_ip_w = intf_ip_w / 2;
>>>       initial_lines = dpu_encoder_dsc_initial_line_calc(dsc, enc_ip_w);
>>>   -    for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
>>> +    for (i = 0; i < num_dsc; i++)
>>>           dpu_encoder_dsc_pipe_cfg(dpu_enc, hw_dsc[i], hw_pp[i], dsc,
>>>                       dsc_common_mode, initial_lines);
>>>   }
>>

-- 
With best wishes
Dmitry