Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <ff2dd271-71f7-47e0-b200-4edd2d692e71@linaro.org>
Date:   Sat, 22 Apr 2023 11:56:33 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.1
Subject: Re: [PATCH 3/3] arm64: dts: qcom: pm8953: add GPIOs
To:     Luca Weiss <luca@z3ntu.xyz>, ~postmarketos/upstreaming@lists.sr.ht,
        phone-devel@vger.kernel.org, Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20230421-pm8953-gpio-v1-0-3d33e2de47e3@z3ntu.xyz>
 <20230421-pm8953-gpio-v1-3-3d33e2de47e3@z3ntu.xyz>
Content-Language: en-US
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230421-pm8953-gpio-v1-3-3d33e2de47e3@z3ntu.xyz>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 21.04.2023 23:56, Luca Weiss wrote:
> Add a node for the GPIOs found on the pm8953.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8953.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
> index a1d36f9ebbd2..2268daf27fa7 100644
> --- a/arch/arm64/boot/dts/qcom/pm8953.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
> @@ -79,6 +79,16 @@ rtc@6000 {
>  			reg-names = "rtc", "alarm";
>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>  		};
> +
> +		pm8953_gpios: gpio@c000 {
> +			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
> +			reg = <0xc000>;
> +			gpio-controller;
> +			gpio-ranges = <&pm8953_gpios 0 0 8>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
>  	};
>  
>  	pmic@1 {
>