Received: by 2002:a05:6358:9144:b0:117:f937:c515 with SMTP id r4csp539259rwr; Wed, 26 Apr 2023 03:00:39 -0700 (PDT) X-Google-Smtp-Source: AKy350ZLZWSPdp6bWhomqDoxN3KJ68snHOZY5mGmZ1pNyMqY9KBAu4iNvbozpNzGsrdOrkL5DL5i X-Received: by 2002:a05:6a20:1592:b0:f4:3935:4470 with SMTP id h18-20020a056a20159200b000f439354470mr13298724pzj.8.1682503238426; Wed, 26 Apr 2023 03:00:38 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1682503238; cv=none; d=google.com; s=arc-20160816; b=zeP8YEjbfTEZ5SMmBHGjdnJXc76DxJ1q28a9kZlc8jgjWndL9RKflyvmwC/Uy3XYvk SJ0ehoZlH66n6gPuiMu+41Zxl9ciHIskpUBq0DJlvz2q9ZbdWc4qyd/BpJLluBfNIlYR TUfnB+6Y8fxP5zC2MGMyO4dfzXLcdD17ZA+ErE9Tb2NlB1p/vZqNvylcMpdcyAWxfwdA lVQFuw1NuiAuwKSvhN/xQf9tQBT01MY+RtowDLgtk2d+1xvlXNOMqB1PPM3cPqZznkB9 K3Hz4vASS+tUuNOZQZVBdfgfd6n9JAAY/cGwo+lit95CeQsvjG/tZVXqurfmkxBqiUZ1 cuRw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=pR+avVZXfsGVYHw3anGwGjIs8w+OKfRZNqs03z0wiA0=; b=0vTPWSRNVwLBb4mvrQo1cpg4ETW/yKW+/EsucEisIJTyMAhP3EXFCQWyfIAYkZpRzg QQ45kjzwVnQSepGlwYiQA/plWYAjWpJsHFaqmr/3I5/VEv9VHzqzW+pIOEf7oEdbHHXL WXq8TUpkBnBMp6+ba0379b7DQM0iNB122WnhuSOOonFk0kCMshfK8YagnS9ZnqFmWttH gY+wZl5erFSg9RW9toik8yc7Iiw8BhoBjV+bgwBGqFKhKmdznYpbGZsLENIh/SvUqIRT HHK7nQ7gfysnIyDpQb2y+jS44dbHbFMifow6h9Jnd2QqiWaG03RZscsTPIy7DyfTINC6 57cg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=BRuRCYk9; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id s8-20020a17090aad8800b0024489068406si18709019pjq.113.2023.04.26.03.00.23; Wed, 26 Apr 2023 03:00:38 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@sberdevices.ru header.s=mail header.b=BRuRCYk9; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=QUARANTINE dis=NONE) header.from=sberdevices.ru Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S240408AbjDZJ6n (ORCPT + 99 others); Wed, 26 Apr 2023 05:58:43 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40620 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240349AbjDZJ6Z (ORCPT ); Wed, 26 Apr 2023 05:58:25 -0400 Received: from mx.sberdevices.ru (mx.sberdevices.ru [45.89.227.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 071FF195; Wed, 26 Apr 2023 02:58:20 -0700 (PDT) Received: from s-lin-edge02.sberdevices.ru (localhost [127.0.0.1]) by mx.sberdevices.ru (Postfix) with ESMTP id 5A3E55FD7B; Wed, 26 Apr 2023 12:58:18 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sberdevices.ru; s=mail; t=1682503098; bh=pR+avVZXfsGVYHw3anGwGjIs8w+OKfRZNqs03z0wiA0=; h=From:To:Subject:Date:Message-ID:MIME-Version:Content-Type; b=BRuRCYk9OmwNPM13G8bW6X9Bmhi8SMgz1XKrA5t6sFIpWPkBmXU0nuFSZ6GakHpaA 5+UlLq1JNcjSTA+c3j+I6hCXet687U6wo8/j9xJxKK3gPHJiii6LmUTd2wzuw5i/pP 714juRjXyMeJTRnV20YqUIrF3iTrq9wFICKHZlbWnwP2LuVRXkPVyBYSOsM2bPWsCL 1qaBSrdnyX7QOCQ9Zd81+o+a2w9qW5CovoSHcTCbJixHLe1UHup0DA4zDLwozDtRUG Oej20E2kF2TeNyc4f1oGIUIWbomvggqf2lqKFWjYrQH17PinIE3W1UDbTpW20zeOOt 6uL/PQM2pVOPw== Received: from S-MS-EXCH01.sberdevices.ru (S-MS-EXCH01.sberdevices.ru [172.16.1.4]) by mx.sberdevices.ru (Postfix) with ESMTP; Wed, 26 Apr 2023 12:58:18 +0300 (MSK) From: Dmitry Rokosov To: , , , , , , , CC: , , , , , , , , Dmitry Rokosov Subject: [PATCH v14 6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver Date: Wed, 26 Apr 2023 12:58:05 +0300 Message-ID: <20230426095805.15338-7-ddrokosov@sberdevices.ru> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20230426095805.15338-1-ddrokosov@sberdevices.ru> References: <20230426095805.15338-1-ddrokosov@sberdevices.ru> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-Originating-IP: [172.16.1.6] X-ClientProxiedBy: S-MS-EXCH01.sberdevices.ru (172.16.1.4) To S-MS-EXCH01.sberdevices.ru (172.16.1.4) X-KSMG-Rule-ID: 4 X-KSMG-Message-Action: clean X-KSMG-AntiSpam-Status: not scanned, disabled by settings X-KSMG-AntiSpam-Interceptor-Info: not scanned X-KSMG-AntiPhishing: not scanned, disabled by settings X-KSMG-AntiVirus: Kaspersky Secure Mail Gateway, version 1.1.2.30, bases: 2023/04/26 04:45:00 #21166225 X-KSMG-AntiVirus-Status: Clean, skipped X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_NONE, T_SCC_BODY_TEXT_LINE,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Introduce Peripherals clock controller for Amlogic A1 SoC family. A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU, and Audio. This patchset adds support for Amlogic A1 Peripherals clock driver and allows to generate clocks for all A1 SoC peripheral IPs. Signed-off-by: Jian Hu Signed-off-by: Dmitry Rokosov --- drivers/clk/meson/Kconfig | 10 + drivers/clk/meson/Makefile | 1 + drivers/clk/meson/a1.c | 2273 ++++++++++++++++++++++++++++++++++++ drivers/clk/meson/a1.h | 114 ++ 4 files changed, 2398 insertions(+) create mode 100644 drivers/clk/meson/a1.c create mode 100644 drivers/clk/meson/a1.h diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 693c4cf60f27..dff576363b1f 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -109,6 +109,16 @@ config COMMON_CLK_A1_PLL device, A1 SoC Family. Say Y if you want A1 PLL clock controller to work. +config COMMON_CLK_A1 + tristate "Amlogic A1 SoC clock controller support" + depends on ARM64 + select COMMON_CLK_MESON_DUALDIV + select COMMON_CLK_MESON_REGMAP + help + Support for the Peripherals clock controller on Amlogic A113L based + device, A1 SoC Family. Say Y if you want A1 Peripherals clock + controller to work. + config COMMON_CLK_G12A tristate "G12 and SM1 SoC clock controllers support" depends on ARM64 diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index 2f17f475a48f..0e6f293c05d4 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o +obj-$(CONFIG_COMMON_CLK_A1) += a1.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a1.c new file mode 100644 index 000000000000..51b50b3ff100 --- /dev/null +++ b/drivers/clk/meson/a1.c @@ -0,0 +1,2273 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#include +#include +#include +#include "a1.h" +#include "clk-dualdiv.h" +#include "clk-regmap.h" + +static struct clk_regmap xtal_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "xtal_in", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fixpll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "fixpll_in", + .ops = &clk_regmap_gate_ro_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap usb_phy_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 2, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_phy_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap usb_ctrl_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 3, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_ctrl_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap hifipll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 4, + }, + .hw.init = &(struct clk_init_data) { + .name = "hifipll_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap syspll_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 5, + }, + .hw.init = &(struct clk_init_data) { + .name = "syspll_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap dds_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_OSCIN_CTRL, + .bit_idx = 6, + }, + .hw.init = &(struct clk_init_data) { + .name = "dds_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static const struct meson_clk_dualdiv_param clk_32k_div_table[] = { + { + .dual = 1, + .n1 = 733, + .m1 = 8, + .n2 = 732, + .m2 = 11, + }, + {} +}; + +static struct clk_regmap rtc_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = RTC_BY_OSCIN_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = RTC_BY_OSCIN_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_xtal = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL1, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "rtc_32k_xtal", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap rtc_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = RTC_CTRL, + .mask = 0x3, + .shift = 0, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_xtal.hw, + &rtc_32k_div.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * All clocks that can be inherited from a more accurate RTC clock are marked + * with the CLK_SET_RATE_NO_REPARENT flag. This is because in certain + * situations, we may need to freeze their parent. The parent setup of these + * clocks should be located on the device tree side. + */ +struct clk_regmap rtc = { + .data = &(struct clk_regmap_gate_data){ + .offset = RTC_BY_OSCIN_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "rtc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &rtc_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 }; +static const struct clk_parent_data sys_parents[] = { + { .fw_name = "xtal" }, + { .fw_name = "fclk_div2" }, + { .fw_name = "fclk_div3" }, + { .fw_name = "fclk_div5" }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap sys_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_sys, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_parents, + .num_parents = ARRAY_SIZE(sys_parents), + }, +}; + +static struct clk_regmap sys_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_sys, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_sel", + .ops = &clk_regmap_mux_ro_ops, + .parent_data = sys_parents, + .num_parents = ARRAY_SIZE(sys_parents), + }, +}; + +static struct clk_regmap sys_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SYS_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = SYS_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "sys_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sys = { + .data = &(struct clk_regmap_mux_data){ + .offset = SYS_CLK_CTRL0, + .mask = 0x1, + .shift = 31, + }, + .hw.init = &(struct clk_init_data){ + .name = "sys", + .ops = &clk_regmap_mux_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &sys_a.hw, + &sys_b.hw, + }, + .num_parents = 2, + /* + * This clock is used by APB bus which is set in boot ROM code + * and is required by the platform to operate correctly. + * Until the following condition are met, we need this clock to + * be marked as critical: + * a) Mark the clock used by a firmware resource, if possible + * b) CCF has a clock hand-off mechanism to make the sure the + * clock stays on until the proper driver comes along + */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 }; +static const struct clk_parent_data dsp_ab_parent_data[] = { + { .fw_name = "xtal", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap dspa_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspa_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPA_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPA_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspa_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_a.hw, + &dspa_b.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspa_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPA_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspa_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspa_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 10, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 0, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 13, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x7, + .shift = 26, + .table = mux_table_dsp_ab, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = dsp_ab_parent_data, + .num_parents = ARRAY_SIZE(dsp_ab_parent_data), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap dspb_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DSPB_CLK_CTRL0, + .shift = 16, + .width = 10, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_CTRL0, + .bit_idx = 29, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DSPB_CLK_CTRL0, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dspb_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_a.hw, + &dspb_b.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 1, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dspb_en_nic = { + .data = &(struct clk_regmap_gate_data){ + .offset = DSPB_CLK_EN, + .bit_idx = 0, + }, + .hw.init = &(struct clk_init_data) { + .name = "dspb_en_nic", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &dspb_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap clk_24m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "24m", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_fixed_factor clk_24m_div2 = { + .mult = 1, + .div = 2, + .hw.init = &(struct clk_init_data){ + .name = "24m_div2", + .ops = &clk_fixed_factor_ops, + .parent_hws = (const struct clk_hw *[]) { + &clk_24m.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap clk_12m = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 10, + }, + .hw.init = &(struct clk_init_data) { + .name = "12m", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &clk_24m_div2.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2_divn_pre = { + .data = &(struct clk_regmap_div_data){ + .offset = CLK12_24_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn_pre", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "fclk_div2", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap fclk_div2_divn = { + .data = &(struct clk_regmap_gate_data){ + .offset = CLK12_24_CTRL, + .bit_idx = 12, + }, + .hw.init = &(struct clk_init_data){ + .name = "fclk_div2_divn", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &fclk_div2_divn_pre.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver, + * the index 4 is the clock measurement source, it's not supported yet + */ +static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 }; +static const struct clk_parent_data gen_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &rtc.hw }, + { .fw_name = "hifi_pll", }, + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "fclk_div7", }, +}; + +static struct clk_regmap gen_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = GEN_CLK_CTRL, + .mask = 0xf, + .shift = 12, + .table = gen_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = gen_parent_data, + .num_parents = ARRAY_SIZE(gen_parent_data), + /* + * The GEN clock can be connected to an external pad, so it + * may be set up directly from the device tree. Additionally, + * the GEN clock can be inherited from a more accurate RTC + * clock, so in certain situations, it may be necessary + * to freeze its parent. + */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap gen_div = { + .data = &(struct clk_regmap_div_data){ + .offset = GEN_CLK_CTRL, + .shift = 0, + .width = 11, + }, + .hw.init = &(struct clk_init_data){ + .name = "gen_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &gen_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap gen = { + .data = &(struct clk_regmap_gate_data){ + .offset = GEN_CLK_CTRL, + .bit_idx = 11, + }, + .hw.init = &(struct clk_init_data) { + .name = "gen", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &gen_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap saradc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SAR_ADC_CLK_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .fw_name = "xtal", }, + { .hw = &sys.hw, }, + }, + .num_parents = 2, + }, +}; + +static struct clk_regmap saradc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SAR_ADC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "saradc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &saradc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap saradc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SAR_ADC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "saradc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &saradc_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_abcd_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap pwm_a_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_a_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_a_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_a_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_a = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_a", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_a_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_b_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_AB_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_b_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_AB_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_b_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_b_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_b = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_AB_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_b", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_b_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_c_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_c_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_c_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_c_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_c = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_c", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_c_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_d_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_CD_CTRL, + .mask = 0x1, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_abcd_parents, + .num_parents = ARRAY_SIZE(pwm_abcd_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_d_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_CD_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_d_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_d_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_d = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_CD_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_d", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_d_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data pwm_ef_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .fw_name = "fclk_div5", }, + { .hw = &rtc.hw }, +}; + +static struct clk_regmap pwm_e_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parents, + .num_parents = ARRAY_SIZE(pwm_ef_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_e_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_e_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_e_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_e = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_e", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_e_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_f_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PWM_CLK_EF_CTRL, + .mask = 0x3, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = pwm_ef_parents, + .num_parents = ARRAY_SIZE(pwm_ef_parents), + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap pwm_f_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PWM_CLK_EF_CTRL, + .shift = 16, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "pwm_f_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_f_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap pwm_f = { + .data = &(struct clk_regmap_gate_data){ + .offset = PWM_CLK_EF_CTRL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data) { + .name = "pwm_f", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &pwm_f_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +/* + * spicc clk + * fdiv2 |\ |\ _____ + * ---------| |---DIV--| | | | spicc out + * ---------| | | |-----|GATE |--------- + * ..... |/ | / |_____| + * --------------------|/ + * 24M + */ +static const struct clk_parent_data spicc_spifc_parents[] = { + { .fw_name = "fclk_div2"}, + { .fw_name = "fclk_div3"}, + { .fw_name = "fclk_div5"}, + { .fw_name = "hifi_pll" }, +}; + +static struct clk_regmap spicc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_spifc_parents, + .num_parents = ARRAY_SIZE(spicc_spifc_parents), + }, +}; + +static struct clk_regmap spicc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPICC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &spicc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spicc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPICC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spicc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &spicc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spicc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPICC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spicc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &spicc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ts_div = { + .data = &(struct clk_regmap_div_data){ + .offset = TS_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "ts_div", + .ops = &clk_regmap_divider_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ts = { + .data = &(struct clk_regmap_gate_data){ + .offset = TS_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "ts", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &ts_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = spicc_spifc_parents, + .num_parents = ARRAY_SIZE(spicc_spifc_parents), + }, +}; + +static struct clk_regmap spifc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SPIFC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &spifc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SPIFC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "spifc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &spifc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap spifc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SPIFC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "spifc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &spifc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data usb_bus_parents[] = { + { .fw_name = "xtal", }, + { .hw = &sys.hw }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, +}; + +static struct clk_regmap usb_bus_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = USB_BUSCLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = usb_bus_parents, + .num_parents = ARRAY_SIZE(usb_bus_parents), + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap usb_bus_div = { + .data = &(struct clk_regmap_div_data){ + .offset = USB_BUSCLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "usb_bus_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &usb_bus_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap usb_bus = { + .data = &(struct clk_regmap_gate_data){ + .offset = USB_BUSCLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "usb_bus", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &usb_bus_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = { + { .fw_name = "fclk_div2", }, + { .fw_name = "fclk_div3", }, + { .fw_name = "fclk_div5", }, + { .fw_name = "hifi_pll", }, +}; + +static struct clk_regmap sd_emmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap sd_emmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = SD_EMMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sd_emmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sd_emmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = SD_EMMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "sd_emmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &sd_emmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sd_emmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = SD_EMMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "sd_emmc", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sd_emmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap psram_div = { + .data = &(struct clk_regmap_div_data){ + .offset = PSRAM_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &psram_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = PSRAM_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "psram_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &psram_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap psram = { + .data = &(struct clk_regmap_gate_data){ + .offset = PSRAM_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "psram", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &psram_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x3, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = sd_emmc_psram_dmc_parents, + .num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents), + }, +}; + +static struct clk_regmap dmc_div = { + .data = &(struct clk_regmap_div_data){ + .offset = DMC_CLK_CTRL, + .shift = 0, + .width = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &dmc_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc_sel2 = { + .data = &(struct clk_regmap_mux_data){ + .offset = DMC_CLK_CTRL, + .mask = 0x1, + .shift = 15, + }, + .hw.init = &(struct clk_init_data){ + .name = "dmc_sel2", + .ops = &clk_regmap_mux_ops, + .parent_data = (const struct clk_parent_data []) { + { .hw = &dmc_div.hw }, + { .fw_name = "xtal", }, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap dmc = { + .data = &(struct clk_regmap_gate_data){ + .offset = DMC_CLK_CTRL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data) { + .name = "dmc", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &dmc_sel2.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "ceca_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ceca_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECA_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECA_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECA_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap ceca_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_div.hw, + &ceca_32k_in.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap ceca_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECA_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_sel_pre.hw, + &rtc.hw, + }, + .num_parents = 2, + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap ceca_32k_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECA_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "ceca_32k_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &ceca_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_in = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 31, + }, + .hw.init = &(struct clk_init_data) { + .name = "cecb_32k_in", + .ops = &clk_regmap_gate_ops, + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xtal", + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap cecb_32k_div = { + .data = &(struct meson_clk_dualdiv_data){ + .n1 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 0, + .width = 12, + }, + .n2 = { + .reg_off = CECB_CLK_CTRL0, + .shift = 12, + .width = 12, + }, + .m1 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 0, + .width = 12, + }, + .m2 = { + .reg_off = CECB_CLK_CTRL1, + .shift = 12, + .width = 12, + }, + .dual = { + .reg_off = CECB_CLK_CTRL0, + .shift = 28, + .width = 1, + }, + .table = clk_32k_div_table, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_div", + .ops = &meson_clk_dualdiv_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_in.hw + }, + .num_parents = 1, + }, +}; + +static struct clk_regmap cecb_32k_sel_pre = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 24, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel_pre", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_div.hw, + &cecb_32k_in.hw, + }, + .num_parents = 2, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap cecb_32k_sel = { + .data = &(struct clk_regmap_mux_data) { + .offset = CECB_CLK_CTRL1, + .mask = 0x1, + .shift = 31, + .flags = CLK_MUX_ROUND_CLOSEST, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_sel", + .ops = &clk_regmap_mux_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_sel_pre.hw, + &rtc.hw, + }, + .num_parents = 2, + /* For more information, please refer to rtc clock */ + .flags = CLK_SET_RATE_NO_REPARENT, + }, +}; + +static struct clk_regmap cecb_32k_out = { + .data = &(struct clk_regmap_gate_data){ + .offset = CECB_CLK_CTRL0, + .bit_idx = 30, + }, + .hw.init = &(struct clk_init_data){ + .name = "cecb_32k_out", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &cecb_32k_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +#define MESON_GATE(_name, _reg, _bit) \ + MESON_PCLK(_name, _reg, _bit, &sys.hw) + +static MESON_GATE(clktree, SYS_CLK_EN0, 0); +static MESON_GATE(reset_ctrl, SYS_CLK_EN0, 1); +static MESON_GATE(analog_ctrl, SYS_CLK_EN0, 2); +static MESON_GATE(pwr_ctrl, SYS_CLK_EN0, 3); +static MESON_GATE(pad_ctrl, SYS_CLK_EN0, 4); +static MESON_GATE(sys_ctrl, SYS_CLK_EN0, 5); +static MESON_GATE(temp_sensor, SYS_CLK_EN0, 6); +static MESON_GATE(am2axi_dev, SYS_CLK_EN0, 7); +static MESON_GATE(spicc_b, SYS_CLK_EN0, 8); +static MESON_GATE(spicc_a, SYS_CLK_EN0, 9); +static MESON_GATE(msr, SYS_CLK_EN0, 10); +static MESON_GATE(audio, SYS_CLK_EN0, 11); +static MESON_GATE(jtag_ctrl, SYS_CLK_EN0, 12); +static MESON_GATE(saradc_en, SYS_CLK_EN0, 13); +static MESON_GATE(pwm_ef, SYS_CLK_EN0, 14); +static MESON_GATE(pwm_cd, SYS_CLK_EN0, 15); +static MESON_GATE(pwm_ab, SYS_CLK_EN0, 16); +static MESON_GATE(cec, SYS_CLK_EN0, 17); +static MESON_GATE(i2c_s, SYS_CLK_EN0, 18); +static MESON_GATE(ir_ctrl, SYS_CLK_EN0, 19); +static MESON_GATE(i2c_m_d, SYS_CLK_EN0, 20); +static MESON_GATE(i2c_m_c, SYS_CLK_EN0, 21); +static MESON_GATE(i2c_m_b, SYS_CLK_EN0, 22); +static MESON_GATE(i2c_m_a, SYS_CLK_EN0, 23); +static MESON_GATE(acodec, SYS_CLK_EN0, 24); +static MESON_GATE(otp, SYS_CLK_EN0, 25); +static MESON_GATE(sd_emmc_a, SYS_CLK_EN0, 26); +static MESON_GATE(usb_phy, SYS_CLK_EN0, 27); +static MESON_GATE(usb_ctrl, SYS_CLK_EN0, 28); +static MESON_GATE(sys_dspb, SYS_CLK_EN0, 29); +static MESON_GATE(sys_dspa, SYS_CLK_EN0, 30); +static MESON_GATE(dma, SYS_CLK_EN0, 31); +static MESON_GATE(irq_ctrl, SYS_CLK_EN1, 0); +static MESON_GATE(nic, SYS_CLK_EN1, 1); +static MESON_GATE(gic, SYS_CLK_EN1, 2); +static MESON_GATE(uart_c, SYS_CLK_EN1, 3); +static MESON_GATE(uart_b, SYS_CLK_EN1, 4); +static MESON_GATE(uart_a, SYS_CLK_EN1, 5); +static MESON_GATE(sys_psram, SYS_CLK_EN1, 6); +static MESON_GATE(rsa, SYS_CLK_EN1, 8); +static MESON_GATE(coresight, SYS_CLK_EN1, 9); +static MESON_GATE(am2axi_vad, AXI_CLK_EN, 0); +static MESON_GATE(audio_vad, AXI_CLK_EN, 1); +static MESON_GATE(axi_dmc, AXI_CLK_EN, 3); +static MESON_GATE(axi_psram, AXI_CLK_EN, 4); +static MESON_GATE(ramb, AXI_CLK_EN, 5); +static MESON_GATE(rama, AXI_CLK_EN, 6); +static MESON_GATE(axi_spifc, AXI_CLK_EN, 7); +static MESON_GATE(axi_nic, AXI_CLK_EN, 8); +static MESON_GATE(axi_dma, AXI_CLK_EN, 9); +static MESON_GATE(cpu_ctrl, AXI_CLK_EN, 10); +static MESON_GATE(rom, AXI_CLK_EN, 11); +static MESON_GATE(prod_i2c, AXI_CLK_EN, 12); + +/* Array of all clocks registered by this provider */ +static struct clk_hw_onecell_data a1_periphs_clks = { + .hws = { + [CLKID_XTAL_IN] = &xtal_in.hw, + [CLKID_FIXPLL_IN] = &fixpll_in.hw, + [CLKID_USB_PHY_IN] = &usb_phy_in.hw, + [CLKID_USB_CTRL_IN] = &usb_ctrl_in.hw, + [CLKID_HIFIPLL_IN] = &hifipll_in.hw, + [CLKID_SYSPLL_IN] = &syspll_in.hw, + [CLKID_DDS_IN] = &dds_in.hw, + [CLKID_SYS] = &sys.hw, + [CLKID_CLKTREE] = &clktree.hw, + [CLKID_RESET_CTRL] = &reset_ctrl.hw, + [CLKID_ANALOG_CTRL] = &analog_ctrl.hw, + [CLKID_PWR_CTRL] = &pwr_ctrl.hw, + [CLKID_PAD_CTRL] = &pad_ctrl.hw, + [CLKID_SYS_CTRL] = &sys_ctrl.hw, + [CLKID_TEMP_SENSOR] = &temp_sensor.hw, + [CLKID_AM2AXI_DIV] = &am2axi_dev.hw, + [CLKID_SPICC_B] = &spicc_b.hw, + [CLKID_SPICC_A] = &spicc_a.hw, + [CLKID_MSR] = &msr.hw, + [CLKID_AUDIO] = &audio.hw, + [CLKID_JTAG_CTRL] = &jtag_ctrl.hw, + [CLKID_SARADC_EN] = &saradc_en.hw, + [CLKID_PWM_EF] = &pwm_ef.hw, + [CLKID_PWM_CD] = &pwm_cd.hw, + [CLKID_PWM_AB] = &pwm_ab.hw, + [CLKID_CEC] = &cec.hw, + [CLKID_I2C_S] = &i2c_s.hw, + [CLKID_IR_CTRL] = &ir_ctrl.hw, + [CLKID_I2C_M_D] = &i2c_m_d.hw, + [CLKID_I2C_M_C] = &i2c_m_c.hw, + [CLKID_I2C_M_B] = &i2c_m_b.hw, + [CLKID_I2C_M_A] = &i2c_m_a.hw, + [CLKID_ACODEC] = &acodec.hw, + [CLKID_OTP] = &otp.hw, + [CLKID_SD_EMMC_A] = &sd_emmc_a.hw, + [CLKID_USB_PHY] = &usb_phy.hw, + [CLKID_USB_CTRL] = &usb_ctrl.hw, + [CLKID_SYS_DSPB] = &sys_dspb.hw, + [CLKID_SYS_DSPA] = &sys_dspa.hw, + [CLKID_DMA] = &dma.hw, + [CLKID_IRQ_CTRL] = &irq_ctrl.hw, + [CLKID_NIC] = &nic.hw, + [CLKID_GIC] = &gic.hw, + [CLKID_UART_C] = &uart_c.hw, + [CLKID_UART_B] = &uart_b.hw, + [CLKID_UART_A] = &uart_a.hw, + [CLKID_SYS_PSRAM] = &sys_psram.hw, + [CLKID_RSA] = &rsa.hw, + [CLKID_CORESIGHT] = &coresight.hw, + [CLKID_AM2AXI_VAD] = &am2axi_vad.hw, + [CLKID_AUDIO_VAD] = &audio_vad.hw, + [CLKID_AXI_DMC] = &axi_dmc.hw, + [CLKID_AXI_PSRAM] = &axi_psram.hw, + [CLKID_RAMB] = &ramb.hw, + [CLKID_RAMA] = &rama.hw, + [CLKID_AXI_SPIFC] = &axi_spifc.hw, + [CLKID_AXI_NIC] = &axi_nic.hw, + [CLKID_AXI_DMA] = &axi_dma.hw, + [CLKID_CPU_CTRL] = &cpu_ctrl.hw, + [CLKID_ROM] = &rom.hw, + [CLKID_PROC_I2C] = &prod_i2c.hw, + [CLKID_DSPA_SEL] = &dspa_sel.hw, + [CLKID_DSPB_SEL] = &dspb_sel.hw, + [CLKID_DSPA_EN] = &dspa_en.hw, + [CLKID_DSPA_EN_NIC] = &dspa_en_nic.hw, + [CLKID_DSPB_EN] = &dspb_en.hw, + [CLKID_DSPB_EN_NIC] = &dspb_en_nic.hw, + [CLKID_RTC] = &rtc.hw, + [CLKID_CECA_32K] = &ceca_32k_out.hw, + [CLKID_CECB_32K] = &cecb_32k_out.hw, + [CLKID_24M] = &clk_24m.hw, + [CLKID_12M] = &clk_12m.hw, + [CLKID_FCLK_DIV2_DIVN] = &fclk_div2_divn.hw, + [CLKID_GEN] = &gen.hw, + [CLKID_SARADC_SEL] = &saradc_sel.hw, + [CLKID_SARADC] = &saradc.hw, + [CLKID_PWM_A] = &pwm_a.hw, + [CLKID_PWM_B] = &pwm_b.hw, + [CLKID_PWM_C] = &pwm_c.hw, + [CLKID_PWM_D] = &pwm_d.hw, + [CLKID_PWM_E] = &pwm_e.hw, + [CLKID_PWM_F] = &pwm_f.hw, + [CLKID_SPICC] = &spicc.hw, + [CLKID_TS] = &ts.hw, + [CLKID_SPIFC] = &spifc.hw, + [CLKID_USB_BUS] = &usb_bus.hw, + [CLKID_SD_EMMC] = &sd_emmc.hw, + [CLKID_PSRAM] = &psram.hw, + [CLKID_DMC] = &dmc.hw, + [CLKID_SYS_A_SEL] = &sys_a_sel.hw, + [CLKID_SYS_A_DIV] = &sys_a_div.hw, + [CLKID_SYS_A] = &sys_a.hw, + [CLKID_SYS_B_SEL] = &sys_b_sel.hw, + [CLKID_SYS_B_DIV] = &sys_b_div.hw, + [CLKID_SYS_B] = &sys_b.hw, + [CLKID_DSPA_A_SEL] = &dspa_a_sel.hw, + [CLKID_DSPA_A_DIV] = &dspa_a_div.hw, + [CLKID_DSPA_A] = &dspa_a.hw, + [CLKID_DSPA_B_SEL] = &dspa_b_sel.hw, + [CLKID_DSPA_B_DIV] = &dspa_b_div.hw, + [CLKID_DSPA_B] = &dspa_b.hw, + [CLKID_DSPB_A_SEL] = &dspb_a_sel.hw, + [CLKID_DSPB_A_DIV] = &dspb_a_div.hw, + [CLKID_DSPB_A] = &dspb_a.hw, + [CLKID_DSPB_B_SEL] = &dspb_b_sel.hw, + [CLKID_DSPB_B_DIV] = &dspb_b_div.hw, + [CLKID_DSPB_B] = &dspb_b.hw, + [CLKID_RTC_32K_IN] = &rtc_32k_in.hw, + [CLKID_RTC_32K_DIV] = &rtc_32k_div.hw, + [CLKID_RTC_32K_XTAL] = &rtc_32k_xtal.hw, + [CLKID_RTC_32K_SEL] = &rtc_32k_sel.hw, + [CLKID_CECB_32K_IN] = &cecb_32k_in.hw, + [CLKID_CECB_32K_DIV] = &cecb_32k_div.hw, + [CLKID_CECB_32K_SEL_PRE] = &cecb_32k_sel_pre.hw, + [CLKID_CECB_32K_SEL] = &cecb_32k_sel.hw, + [CLKID_CECA_32K_IN] = &ceca_32k_in.hw, + [CLKID_CECA_32K_DIV] = &ceca_32k_div.hw, + [CLKID_CECA_32K_SEL_PRE] = &ceca_32k_sel_pre.hw, + [CLKID_CECA_32K_SEL] = &ceca_32k_sel.hw, + [CLKID_DIV2_PRE] = &fclk_div2_divn_pre.hw, + [CLKID_24M_DIV2] = &clk_24m_div2.hw, + [CLKID_GEN_SEL] = &gen_sel.hw, + [CLKID_GEN_DIV] = &gen_div.hw, + [CLKID_SARADC_DIV] = &saradc_div.hw, + [CLKID_PWM_A_SEL] = &pwm_a_sel.hw, + [CLKID_PWM_A_DIV] = &pwm_a_div.hw, + [CLKID_PWM_B_SEL] = &pwm_b_sel.hw, + [CLKID_PWM_B_DIV] = &pwm_b_div.hw, + [CLKID_PWM_C_SEL] = &pwm_c_sel.hw, + [CLKID_PWM_C_DIV] = &pwm_c_div.hw, + [CLKID_PWM_D_SEL] = &pwm_d_sel.hw, + [CLKID_PWM_D_DIV] = &pwm_d_div.hw, + [CLKID_PWM_E_SEL] = &pwm_e_sel.hw, + [CLKID_PWM_E_DIV] = &pwm_e_div.hw, + [CLKID_PWM_F_SEL] = &pwm_f_sel.hw, + [CLKID_PWM_F_DIV] = &pwm_f_div.hw, + [CLKID_SPICC_SEL] = &spicc_sel.hw, + [CLKID_SPICC_DIV] = &spicc_div.hw, + [CLKID_SPICC_SEL2] = &spicc_sel2.hw, + [CLKID_TS_DIV] = &ts_div.hw, + [CLKID_SPIFC_SEL] = &spifc_sel.hw, + [CLKID_SPIFC_DIV] = &spifc_div.hw, + [CLKID_SPIFC_SEL2] = &spifc_sel2.hw, + [CLKID_USB_BUS_SEL] = &usb_bus_sel.hw, + [CLKID_USB_BUS_DIV] = &usb_bus_div.hw, + [CLKID_SD_EMMC_SEL] = &sd_emmc_sel.hw, + [CLKID_SD_EMMC_DIV] = &sd_emmc_div.hw, + [CLKID_SD_EMMC_SEL2] = &sd_emmc_sel2.hw, + [CLKID_PSRAM_SEL] = &psram_sel.hw, + [CLKID_PSRAM_DIV] = &psram_div.hw, + [CLKID_PSRAM_SEL2] = &psram_sel2.hw, + [CLKID_DMC_SEL] = &dmc_sel.hw, + [CLKID_DMC_DIV] = &dmc_div.hw, + [CLKID_DMC_SEL2] = &dmc_sel2.hw, + [NR_CLKS] = NULL, + }, + .num = NR_CLKS, +}; + +/* Convenience table to populate regmap in .probe */ +static struct clk_regmap *const a1_periphs_regmaps[] = { + &xtal_in, + &fixpll_in, + &usb_phy_in, + &usb_ctrl_in, + &hifipll_in, + &syspll_in, + &dds_in, + &sys, + &clktree, + &reset_ctrl, + &analog_ctrl, + &pwr_ctrl, + &pad_ctrl, + &sys_ctrl, + &temp_sensor, + &am2axi_dev, + &spicc_b, + &spicc_a, + &msr, + &audio, + &jtag_ctrl, + &saradc_en, + &pwm_ef, + &pwm_cd, + &pwm_ab, + &cec, + &i2c_s, + &ir_ctrl, + &i2c_m_d, + &i2c_m_c, + &i2c_m_b, + &i2c_m_a, + &acodec, + &otp, + &sd_emmc_a, + &usb_phy, + &usb_ctrl, + &sys_dspb, + &sys_dspa, + &dma, + &irq_ctrl, + &nic, + &gic, + &uart_c, + &uart_b, + &uart_a, + &sys_psram, + &rsa, + &coresight, + &am2axi_vad, + &audio_vad, + &axi_dmc, + &axi_psram, + &ramb, + &rama, + &axi_spifc, + &axi_nic, + &axi_dma, + &cpu_ctrl, + &rom, + &prod_i2c, + &dspa_sel, + &dspb_sel, + &dspa_en, + &dspa_en_nic, + &dspb_en, + &dspb_en_nic, + &rtc, + &ceca_32k_out, + &cecb_32k_out, + &clk_24m, + &clk_12m, + &fclk_div2_divn, + &gen, + &saradc_sel, + &saradc, + &pwm_a, + &pwm_b, + &pwm_c, + &pwm_d, + &pwm_e, + &pwm_f, + &spicc, + &ts, + &spifc, + &usb_bus, + &sd_emmc, + &psram, + &dmc, + &sys_a_sel, + &sys_a_div, + &sys_a, + &sys_b_sel, + &sys_b_div, + &sys_b, + &dspa_a_sel, + &dspa_a_div, + &dspa_a, + &dspa_b_sel, + &dspa_b_div, + &dspa_b, + &dspb_a_sel, + &dspb_a_div, + &dspb_a, + &dspb_b_sel, + &dspb_b_div, + &dspb_b, + &rtc_32k_in, + &rtc_32k_div, + &rtc_32k_xtal, + &rtc_32k_sel, + &cecb_32k_in, + &cecb_32k_div, + &cecb_32k_sel_pre, + &cecb_32k_sel, + &ceca_32k_in, + &ceca_32k_div, + &ceca_32k_sel_pre, + &ceca_32k_sel, + &fclk_div2_divn_pre, + &gen_sel, + &gen_div, + &saradc_div, + &pwm_a_sel, + &pwm_a_div, + &pwm_b_sel, + &pwm_b_div, + &pwm_c_sel, + &pwm_c_div, + &pwm_d_sel, + &pwm_d_div, + &pwm_e_sel, + &pwm_e_div, + &pwm_f_sel, + &pwm_f_div, + &spicc_sel, + &spicc_div, + &spicc_sel2, + &ts_div, + &spifc_sel, + &spifc_div, + &spifc_sel2, + &usb_bus_sel, + &usb_bus_div, + &sd_emmc_sel, + &sd_emmc_div, + &sd_emmc_sel2, + &psram_sel, + &psram_div, + &psram_sel2, + &dmc_sel, + &dmc_div, + &dmc_sel2, +}; + +static struct regmap_config a1_periphs_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static int meson_a1_periphs_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + void __iomem *base; + struct regmap *map; + int clkid, i, err; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return dev_err_probe(dev, PTR_ERR(base), + "can't ioremap resource\n"); + + map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg); + if (IS_ERR(map)) + return dev_err_probe(dev, PTR_ERR(map), + "can't init regmap mmio region\n"); + + /* Populate regmap for the regmap backed clocks */ + for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++) + a1_periphs_regmaps[i]->map = map; + + for (clkid = 0; clkid < a1_periphs_clks.num; clkid++) { + err = devm_clk_hw_register(dev, a1_periphs_clks.hws[clkid]); + if (err) + return dev_err_probe(dev, err, + "clock[%d] registration failed\n", + clkid); + } + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &a1_periphs_clks); +} + +static const struct of_device_id a1_periphs_clkc_match_table[] = { + { .compatible = "amlogic,a1-clkc", }, + {} +}; +MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table); + +static struct platform_driver a1_periphs_clkc_driver = { + .probe = meson_a1_periphs_probe, + .driver = { + .name = "a1-clkc", + .of_match_table = a1_periphs_clkc_match_table, + }, +}; + +module_platform_driver(a1_periphs_clkc_driver); +MODULE_AUTHOR("Jian Hu "); +MODULE_AUTHOR("Dmitry Rokosov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/meson/a1.h b/drivers/clk/meson/a1.h new file mode 100644 index 000000000000..359b46b73035 --- /dev/null +++ b/drivers/clk/meson/a1.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Amlogic A1 Peripheral Clock Controller internals + * + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + * Author: Jian Hu + * + * Copyright (c) 2023, SberDevices. All Rights Reserved. + * Author: Dmitry Rokosov + */ + +#ifndef __A1_H +#define __A1_H + +/* peripheral clock controller register offset */ +#define SYS_OSCIN_CTRL 0x0 +#define RTC_BY_OSCIN_CTRL0 0x4 +#define RTC_BY_OSCIN_CTRL1 0x8 +#define RTC_CTRL 0xc +#define SYS_CLK_CTRL0 0x10 +#define SYS_CLK_EN0 0x1c +#define SYS_CLK_EN1 0x20 +#define AXI_CLK_EN 0x24 +#define DSPA_CLK_EN 0x28 +#define DSPB_CLK_EN 0x2c +#define DSPA_CLK_CTRL0 0x30 +#define DSPB_CLK_CTRL0 0x34 +#define CLK12_24_CTRL 0x38 +#define GEN_CLK_CTRL 0x3c +#define SAR_ADC_CLK_CTRL 0xc0 +#define PWM_CLK_AB_CTRL 0xc4 +#define PWM_CLK_CD_CTRL 0xc8 +#define PWM_CLK_EF_CTRL 0xcc +#define SPICC_CLK_CTRL 0xd0 +#define TS_CLK_CTRL 0xd4 +#define SPIFC_CLK_CTRL 0xd8 +#define USB_BUSCLK_CTRL 0xdc +#define SD_EMMC_CLK_CTRL 0xe0 +#define CECA_CLK_CTRL0 0xe4 +#define CECA_CLK_CTRL1 0xe8 +#define CECB_CLK_CTRL0 0xec +#define CECB_CLK_CTRL1 0xf0 +#define PSRAM_CLK_CTRL 0xf4 +#define DMC_CLK_CTRL 0xf8 + +/* include the CLKIDs that have been made part of the DT binding */ +#include + +/* + * CLKID index values for internal clocks + * + * These indices are entirely contrived and do not map onto the hardware. + * It has now been decided to expose everything by default in the DT header: + * include/dt-bindings/clock/a1-clkc.h. Only the clocks ids we don't want + * to expose, such as the internal muxes and dividers of composite clocks, + * will remain defined here. + */ +#define CLKID_XTAL_IN 0 +#define CLKID_DSPA_SEL 61 +#define CLKID_DSPB_SEL 62 +#define CLKID_SARADC_SEL 74 +#define CLKID_SYS_A_SEL 89 +#define CLKID_SYS_A_DIV 90 +#define CLKID_SYS_A 91 +#define CLKID_SYS_B_SEL 92 +#define CLKID_SYS_B_DIV 93 +#define CLKID_SYS_B 94 +#define CLKID_DSPA_A_DIV 96 +#define CLKID_DSPA_A 97 +#define CLKID_DSPA_B_DIV 99 +#define CLKID_DSPA_B 100 +#define CLKID_DSPB_A_DIV 102 +#define CLKID_DSPB_A 103 +#define CLKID_DSPB_B_DIV 105 +#define CLKID_DSPB_B 106 +#define CLKID_RTC_32K_IN 107 +#define CLKID_RTC_32K_DIV 108 +#define CLKID_RTC_32K_XTAL 109 +#define CLKID_RTC_32K_SEL 110 +#define CLKID_CECB_32K_IN 111 +#define CLKID_CECB_32K_DIV 112 +#define CLKID_CECA_32K_IN 115 +#define CLKID_CECA_32K_DIV 116 +#define CLKID_DIV2_PRE 119 +#define CLKID_24M_DIV2 120 +#define CLKID_GEN_DIV 122 +#define CLKID_SARADC_DIV 123 +#define CLKID_PWM_A_DIV 125 +#define CLKID_PWM_B_DIV 127 +#define CLKID_PWM_C_DIV 129 +#define CLKID_PWM_D_DIV 131 +#define CLKID_PWM_E_DIV 133 +#define CLKID_PWM_F_DIV 135 +#define CLKID_SPICC_SEL 136 +#define CLKID_SPICC_DIV 137 +#define CLKID_SPICC_SEL2 138 +#define CLKID_TS_DIV 139 +#define CLKID_SPIFC_SEL 140 +#define CLKID_SPIFC_DIV 141 +#define CLKID_SPIFC_SEL2 142 +#define CLKID_USB_BUS_SEL 143 +#define CLKID_USB_BUS_DIV 144 +#define CLKID_SD_EMMC_SEL 145 +#define CLKID_SD_EMMC_DIV 146 +#define CLKID_SD_EMMC_SEL2 147 +#define CLKID_PSRAM_SEL 148 +#define CLKID_PSRAM_DIV 149 +#define CLKID_PSRAM_SEL2 150 +#define CLKID_DMC_SEL 151 +#define CLKID_DMC_DIV 152 +#define CLKID_DMC_SEL2 153 +#define NR_CLKS 154 + +#endif /* __A1_H */ -- 2.36.0