Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Siddharth Vadapalli <s-vadapalli@ti.com>
To:     <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski@linaro.org>,
        <krzysztof.kozlowski+dt@linaro.org>, <afd@ti.com>
CC:     <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
        <s-vadapalli@ti.com>
Subject: [RFC PATCH 0/2] Add MAIN CPSW2G DT support for J721S2
Date:   Wed, 26 Apr 2023 16:27:16 +0530
Message-ID: <20230426105718.118806-1-s-vadapalli@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Hello,

This series adds devicetree node for MAIN CPSW2G instance of CPSW
Ethernet Switch on TI's J721S2 SoC. Also, a devicetree overlay is added
in order to enable MAIN CPSW2G in RGMII-RXID mode using the GESI
Expansion Board connected to the J7 Common-Processor-Board.

This series applies on top of the following series:
https://lore.kernel.org/r/20230331090028.8373-1-r-gunasekaran@ti.com/

Regards,
Siddharth.

---

Kishon Vijay Abraham I (2):
  arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node
  arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI

 arch/arm64/boot/dts/ti/Makefile               |  2 +
 .../dts/ti/k3-j721s2-evm-gesi-exp-board.dtso  | 83 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    | 69 +++++++++++++++
 3 files changed, 154 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso

-- 
2.25.1