Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 26 Apr 2023 16:29:23 +0200
From:   Andrew Lunn <andrew@lunn.ch>
To:     Samin Guo <samin.guo@starfivetech.com>
Cc:     linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        netdev@vger.kernel.org, Peter Geis <pgwipeout@gmail.com>,
        Frank <Frank.Sae@motor-comm.com>,
        "David S . Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        Yanhong Wang <yanhong.wang@starfivetech.com>
Subject: Re: [PATCH v1 1/2] dt-bindings: net: motorcomm: Add pad driver
 strength cfg
Message-ID: <fef3aed8-b664-4d36-94f5-266cea4c57a7@lunn.ch>
References: <20230426063541.15378-1-samin.guo@starfivetech.com>
 <20230426063541.15378-2-samin.guo@starfivetech.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20230426063541.15378-2-samin.guo@starfivetech.com>
Precedence: bulk

On Wed, Apr 26, 2023 at 02:35:40PM +0800, Samin Guo wrote:
> The motorcomm phy (YT8531) supports the ability to adjust the drive
> strength of the rx_clk/rx_data, the value range of pad driver
> strength is 0 to 7.
> 
> Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
> ---
>  .../devicetree/bindings/net/motorcomm,yt8xxx.yaml      | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> index 157e3bbcaf6f..e648e486b6d8 100644
> --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
> @@ -18,6 +18,16 @@ properties:
>        - ethernet-phy-id4f51.e91a
>        - ethernet-phy-id4f51.e91b
>  
> +  rx-clk-driver-strength:
> +    description: drive strength of rx_clk pad.
> +    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
> +    default: 3

What do the numbers mean? What are the units? mA?

     Andrew