Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Sender: Corey Minyard <tcminyard@gmail.com>
Date:   Wed, 26 Apr 2023 15:04:03 -0500
From:   Corey Minyard <minyard@acm.org>
To:     Craig Shelley <craig@microtron.org.uk>,
        Johan Hovold <johan@kernel.org>
Cc:     Linux Kernel <linux-kernel@vger.kernel.org>,
        linux-usb@vger.kernel.org
Subject: Break doesn't work on a CP2105
Message-ID: <ZEmDs0ASdnEAnpsL@minyard.net>
Reply-To: minyard@acm.org
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Precedence: bulk

I have a development board with a CP2105 on it, and I was trying to send
a break to it to do a sysrq.  And it wasn't working.

I have verified that the target driver works by setting a really slow
baud rate and sending something with a lot of zero bits.  It got breaks
just fine.

If I use TCSBRK, it seems to just send a short time with zeros, not
even a full character's worth.  It receives a valid character with the
top few bits set.  If I use TCSBRKP with a longer time, like 2.5
seconds, it waits the whole time, then at the very end it gets the
character as with the shorter break.

I can't find a programming manual for the chip, and I'm not sure what's
going on.

-corey