Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <aa94b488-cb6e-bd74-0711-b7c4c7589f7a@linaro.org>
Date:   Thu, 27 Apr 2023 00:33:44 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux aarch64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.0
Subject: Re: [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed
 graph
Content-Language: en-US
To:     Bjorn Andersson <quic_bjorande@quicinc.com>,
        Bjorn Andersson <andersson@kernel.org>,
        Johan Hovold <johan@kernel.org>
Cc:     Vinod Koul <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20230425034010.3789376-1-quic_bjorande@quicinc.com>
 <20230425034010.3789376-7-quic_bjorande@quicinc.com>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230425034010.3789376-7-quic_bjorande@quicinc.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 4/25/23 04:40, Bjorn Andersson wrote:
> With support for the QMP combo phy to react to USB Type-C switch events,
> introduce it as the next hop for the SuperSpeed lanes of the two USB
> Type-C connectors, and connect the output of the DisplayPort controller
> to the QMP combo phy.
>
> This allows the TCPM to perform orientation switching of both USB and
> DisplayPort signals.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 28 ++++++++++++++++---
>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi    | 34 +++++++++++++++++++++++
>   2 files changed, 58 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index 547277924ea3..33c973661fa5 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -64,7 +64,7 @@ port@1 {
>   					reg = <1>;
>   
>   					pmic_glink_con0_ss: endpoint {
> -						remote-endpoint = <&mdss0_dp0_out>;
> +						remote-endpoint = <&usb_0_qmpphy_out>;
>   					};
>   				};
>   
> @@ -99,7 +99,7 @@ port@1 {
>   					reg = <1>;
>   
>   					pmic_glink_con1_ss: endpoint {
> -						remote-endpoint = <&mdss0_dp1_out>;
> +						remote-endpoint = <&usb_1_qmpphy_out>;
>   					};
>   				};
>   
> @@ -412,7 +412,7 @@ &mdss0_dp0 {
>   
>   &mdss0_dp0_out {
>   	data-lanes = <0 1>;
> -	remote-endpoint = <&pmic_glink_con0_ss>;
> +	remote-endpoint = <&usb_0_qmpphy_dp_in>;
>   };
>   
>   &mdss0_dp1 {
> @@ -421,7 +421,7 @@ &mdss0_dp1 {
>   
>   &mdss0_dp1_out {
>   	data-lanes = <0 1>;
> -	remote-endpoint = <&pmic_glink_con1_ss>;
> +	remote-endpoint = <&usb_1_qmpphy_dp_in>;
>   };
>   
>   &mdss0_dp3 {
> @@ -670,9 +670,19 @@ &usb_0_qmpphy {
>   	vdda-phy-supply = <&vreg_l9d>;
>   	vdda-pll-supply = <&vreg_l4d>;
>   
> +	orientation-switch;

I believe this belongs in the SoC DTSI, as it's supported by
the PHY block itself


The rest seems to lgtm..


On a note, why did we end up placing pmic_glink in device
DTs? It's already assumed that we're using the full Qualcomm
stack as we use PAS for remoteprocs so I *think* we can always
assume pmic_glink would be there!

Konrad

> +
>   	status = "okay";
>   };
>   
> +&usb_0_qmpphy_dp_in {
> +	remote-endpoint = <&mdss0_dp0_out>;
> +};
> +
> +&usb_0_qmpphy_out {
> +	remote-endpoint = <&pmic_glink_con0_ss>;
> +};
> +
>   &usb_0_role_switch {
>   	remote-endpoint = <&pmic_glink_con0_hs>;
>   };
> @@ -697,9 +707,19 @@ &usb_1_qmpphy {
>   	vdda-phy-supply = <&vreg_l4b>;
>   	vdda-pll-supply = <&vreg_l3b>;
>   
> +	orientation-switch;
> +
>   	status = "okay";
>   };
>   
> +&usb_1_qmpphy_dp_in {
> +	remote-endpoint = <&mdss0_dp1_out>;
> +};
> +
> +&usb_1_qmpphy_out {
> +	remote-endpoint = <&pmic_glink_con1_ss>;
> +};
> +
>   &usb_1_role_switch {
>   	remote-endpoint = <&pmic_glink_con1_hs>;
>   };
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 0e691bb0120c..1eb3a295e8fa 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -3006,6 +3006,23 @@ usb_0_qmpphy: phy@88eb000 {
>   			#phy-cells = <1>;
>   
>   			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					usb_0_qmpphy_out: endpoint {};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					usb_0_qmpphy_dp_in: endpoint {};
> +				};
> +			};
>   		};
>   
>   		usb_1_hsphy: phy@8902000 {
> @@ -3042,6 +3059,23 @@ usb_1_qmpphy: phy@8903000 {
>   			#phy-cells = <1>;
>   
>   			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +
> +					usb_1_qmpphy_out: endpoint {};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +
> +					usb_1_qmpphy_dp_in: endpoint {};
> +				};
> +			};
>   		};
>   
>   		mdss1_dp0_phy: phy@8909a00 {