Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Roman Beranek <me@crly.cz>
To:     Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
        David Airlie <airlied@gmail.com>,
        Daniel Vetter <daniel@ffwll.ch>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Samuel Holland <samuel@sholland.org>
Cc:     Roman Beranek <me@crly.cz>, Frank Oltmanns <frank@oltmanns.dev>,
        Icenowy Zheng <icenowy@aosc.io>, Ondrej Jirman <megi@xff.cz>,
        dri-devel@lists.freedesktop.org,
        linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev,
        linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/7] arm64: dts: allwinner: a64: reset pll-video0 rate
Date:   Thu, 27 Apr 2023 11:16:08 +0200
Message-Id: <20230427091611.99044-5-me@crly.cz>
In-Reply-To: <20230427091611.99044-1-me@crly.cz>
References: <20230427091611.99044-1-me@crly.cz>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

With pll-mipi as its source clock, the exact rate to which TCON0's data
clock can be set to is constrained by the current rate of pll-video0.
Unless changed on a request of another consumer, the rate of pll-video0
is left as inherited from the bootloader.

The default rate on reset is 297 MHz, a value preferable to what it is
later set to in u-boot (294 MHz). This happens unintentionally though,
as u-boot, for the sake of simplicity, rounds the rate requested by DE2
driver (297 MHz) to 6 MHz steps.

Reset the PLL to its default rate of 297 MHz.

Signed-off-by: Roman Beranek <me@crly.cz>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index e6a194db420d..cfc60dce80b0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -667,6 +667,9 @@ ccu: clock@1c20000 {
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+
+			assigned-clocks = <&ccu CLK_PLL_VIDEO0>;
+			assigned-clock-rates = <297000000>;
 		};
 
 		pio: pinctrl@1c20800 {
-- 
2.34.1