Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 27 Apr 2023 12:33:13 +0000
In-Reply-To: <20230427123314.1997152-1-joychakr@google.com>
Mime-Version: 1.0
References: <20230427123314.1997152-1-joychakr@google.com>
Message-ID: <20230427123314.1997152-5-joychakr@google.com>
Subject: [PATCH v9 4/5] spi: dw: Add DMA address widths capability check
From:   Joy Chakraborty <joychakr@google.com>
To:     Serge Semin <fancer.lancer@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Andy Shevchenko <andriy.shevchenko@intel.com>
Cc:     linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
        manugautam@google.com, rohitner@google.com,
        Joy Chakraborty <joychakr@google.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Store address width capabilities of DMA controller during init and check
the same per transfer to make sure the bits/word requirement can be met.

Current DW DMA driver requires both tx and rx channel to be configured
and functional hence a subset of both tx and rx channel address width
capability is checked with the width requirement(n_bytes) for a
transfer.

Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
* tested on Baikal-T1 based system with DW SPI-looped back interface
transferring a chunk of data with DFS:8,12,16.
---
 drivers/spi/spi-dw-dma.c | 17 ++++++++++++++++-
 drivers/spi/spi-dw.h     |  1 +
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index 22d0727a3789..df819652901a 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -97,6 +97,15 @@ static int dw_spi_dma_caps_init(struct dw_spi *dws)
 		dws->dma_sg_burst = rx.max_sg_burst;
 	else
 		dws->dma_sg_burst = 0;
+
+	/*
+	 * Assuming both channels belong to the same DMA controller hence the
+	 * peripheral side address width capabilities most likely would be
+	 * the same.
+	 */
+	dws->dma_addr_widths = tx.dst_addr_widths & rx.src_addr_widths;
+
+	return 0;
 }
 
 static int dw_spi_dma_init_mfld(struct device *dev, struct dw_spi *dws)
@@ -237,8 +246,14 @@ static bool dw_spi_can_dma(struct spi_controller *master,
 			   struct spi_device *spi, struct spi_transfer *xfer)
 {
 	struct dw_spi *dws = spi_controller_get_devdata(master);
+	enum dma_slave_buswidth dma_bus_width;
+
+	if (xfer->len <= dws->fifo_len)
+		return false;
+
+	dma_bus_width = dw_spi_dma_convert_width(dws->n_bytes);
 
-	return xfer->len > dws->fifo_len;
+	return dws->dma_addr_widths & BIT(dma_bus_width);
 }
 
 static int dw_spi_dma_wait(struct dw_spi *dws, unsigned int len, u32 speed)
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 9e8eb2b52d5c..3962e6dcf880 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -190,6 +190,7 @@ struct dw_spi {
 	struct dma_chan		*rxchan;
 	u32			rxburst;
 	u32			dma_sg_burst;
+	u32			dma_addr_widths;
 	unsigned long		dma_chan_busy;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
 	const struct dw_spi_dma_ops *dma_ops;
-- 
2.40.1.495.gc816e09b53d-goog