Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Luca Weiss <luca@z3ntu.xyz>
Date:   Thu, 27 Apr 2023 22:34:29 +0200
Subject: [PATCH 4/4] ARM: dts: qcom: msm8974-hammerhead: Add vibrator
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20230427-hammerhead-vibra-v1-4-e87eeb94da51@z3ntu.xyz>
References: <20230427-hammerhead-vibra-v1-0-e87eeb94da51@z3ntu.xyz>
In-Reply-To: <20230427-hammerhead-vibra-v1-0-e87eeb94da51@z3ntu.xyz>
To:     ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Sebastian Reichel <sre@kernel.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Brian Masney <masneyb@onstation.org>
Cc:     linux-input@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        Luca Weiss <luca@z3ntu.xyz>
Precedence: bulk

The Nexus 5 has a vibrator connected to the clock output of GP1_CLK
which we can use with the clk-pwm driver, then we can use that pwm with
pwm-vibrator to get haptics functionality.

This patch is based on Brian Masney's previous patch with clk-vibrator.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts     | 35 ++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index ab35f2d644c0..fea8a6be9021 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -41,6 +41,25 @@ key-volume-down {
 		};
 	};
 
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		clocks = <&mmcc CAMSS_GP1_CLK>;
+
+		pinctrl-0 = <&vibrator_pin>;
+		pinctrl-names = "default";
+
+		#pwm-cells = <2>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&pm8941_l19>;
+		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+	};
+
 	vreg_wlan: wlan-regulator {
 		compatible = "regulator-fixed";
 
@@ -637,6 +656,22 @@ shutdown-pins {
 			function = "gpio";
 		};
 	};
+
+	vibrator_pin: vibrator-state {
+		core-pins {
+			pins = "gpio27";
+			function = "gp1_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		enable-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
 
 &usb {

-- 
2.40.0