Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Shazad Hussain <quic_shazhuss@quicinc.com>
To:     <agross@kernel.org>, <andersson@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>
CC:     <dmitry.baryshkov@linaro.org>, <athierry@redhat.com>,
        <robh@kernel.org>, <konrad.dybcio@linaro.org>,
        Shazad Hussain <quic_shazhuss@quicinc.com>,
        "Vinod Koul" <vkoul@kernel.org>,
        Kishon Vijay Abraham I <kishon@kernel.org>,
        "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
        Wesley Cheng <quic_wcheng@quicinc.com>,
        <linux-arm-msm@vger.kernel.org>, <linux-phy@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-usb@vger.kernel.org>
Subject: [PATCH v2 6/6] arm64: dts: qcom: sa8775p-ride: enable USB nodes
Date:   Fri, 28 Apr 2023 18:38:24 +0530
Message-ID: <20230428130824.23803-7-quic_shazhuss@quicinc.com>
In-Reply-To: <20230428130824.23803-1-quic_shazhuss@quicinc.com>
References: <20230428130824.23803-1-quic_shazhuss@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Enable usb0, usb1 and usb2 nodes and their respective phy's.

Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Adrien Thierry <athierry@redhat.com>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 92 +++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index f238a02a5448..13ac60ddd170 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -291,6 +291,13 @@
 			  "BT_EN",
 			  "USB2_PWR_EN",
 			  "USB2_FAULT";
+
+	usb2_en_state: usb2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
 };
 
 &pmm8654au_2_gpios {
@@ -306,6 +313,20 @@
 			  "USB1_PWR_ENABLE",
 			  "USB1_FAULT",
 			  "VMON_SPX8";
+
+	usb0_en_state: usb0-en-state {
+		pins = "gpio3";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+
+	usb1_en_state: usb1-en-state {
+		pins = "gpio10";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
 };
 
 &pmm8654au_3_gpios {
@@ -426,6 +447,77 @@
 	status = "okay";
 };
 
+&usb_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_state>;
+
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_state>;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_en_state>;
+
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <38400000>;
 };
-- 
2.17.1