Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Andrew Halaney <ahalaney@redhat.com>
To:     linux-kernel@vger.kernel.org
Cc:     agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org,
        robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        Andrew Halaney <ahalaney@redhat.com>
Subject: [PATCH v4 2/4] arm64: dts: qcom: Make -cells decimal
Date:   Mon,  1 May 2023 16:24:44 -0500
Message-Id: <20230501212446.2570364-3-ahalaney@redhat.com>
In-Reply-To: <20230501212446.2570364-1-ahalaney@redhat.com>
References: <20230501212446.2570364-1-ahalaney@redhat.com>
MIME-Version: 1.0
Content-type: text/plain
Content-Transfer-Encoding: 8bit
Precedence: bulk

The property logically makes sense in decimal, and is the standard used
elsewhere.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v3:
    * Treat all of arm64/qcom at once (Krzysztof)
    * Dropped Konrad's RB tag since the scope expanded
Changes since v2:
    * Collect tags
Changes since v1:
    * New patch (Konrad)

 arch/arm64/boot/dts/qcom/ipq6018.dtsi        |  2 +-
 arch/arm64/boot/dts/qcom/ipq8074.dtsi        | 14 +++++++-------
 arch/arm64/boot/dts/qcom/msm8953.dtsi        |  4 ++--
 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts |  4 ++--
 arch/arm64/boot/dts/qcom/sa8155p-adp.dts     |  4 ++--
 5 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 9ff4e9d45065..ccaf8e57668a 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -571,7 +571,7 @@ intc: interrupt-controller@b000000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <0x3>;
+			#interrupt-cells = <3>;
 			reg = <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
 			      <0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
 			      <0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 84e715aa4310..0bde1303bb9d 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -29,8 +29,8 @@ xo: xo {
 	};
 
 	cpus {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
@@ -106,8 +106,8 @@ scm {
 	};
 
 	soc: soc {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
@@ -321,9 +321,9 @@ tlmm: pinctrl@1000000 {
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 70>;
-			#gpio-cells = <0x2>;
+			#gpio-cells = <2>;
 			interrupt-controller;
-			#interrupt-cells = <0x2>;
+			#interrupt-cells = <2>;
 
 			serial_4_pins: serial4-state {
 				pins = "gpio23", "gpio24";
@@ -666,7 +666,7 @@ intc: interrupt-controller@b000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-controller;
-			#interrupt-cells = <0x3>;
+			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
 			ranges = <0 0xb00a000 0xffd>;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 602cb188a635..eeebdab58c04 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1505,8 +1505,8 @@ apcs: mailbox@b011000 {
 		timer@b120000 {
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;
-			#address-cells = <0x01>;
-			#size-cells = <0x01>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			ranges;
 
 			frame@b121000 {
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
index 59702ba24f35..358827c2fbd3 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -27,8 +27,8 @@ &ethernet {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	mdio {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
 		phy1: phy@4 {
 			compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 029b23198b3a..ac52a8dfeba1 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -353,8 +353,8 @@ &ethernet {
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		/* Micrel KSZ9031RNZ PHY */
 		rgmii_phy: phy@7 {
-- 
2.40.0