Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20230502010759.17282-1-aford173@gmail.com>
In-Reply-To: <20230502010759.17282-1-aford173@gmail.com>
From:   Chen-Yu Tsai <wenst@chromium.org>
Date:   Tue, 2 May 2023 16:32:01 +0800
Message-ID: <CAGXv+5E00dGDjVz=XNc=bGLsxisA=ShrqESQZLg+MsN-xKe5qQ@mail.gmail.com>
Subject: Re: [PATCH V3 0/7] drm: bridge: samsung-dsim: Support variable clocking
To:     Adam Ford <aford173@gmail.com>
Cc:     dri-devel@lists.freedesktop.org, marex@denx.de,
        Neil Armstrong <neil.armstrong@linaro.org>,
        Robert Foss <rfoss@kernel.org>,
        Jonas Karlman <jonas@kwiboo.se>, aford@beaconembedded.com,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        linux-kernel@vger.kernel.org,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Andrzej Hajda <andrzej.hajda@intel.com>,
        Marek Szyprowski <m.szyprowski@samsung.com>,
        Jagan Teki <jagan@amarulasolutions.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

On Tue, May 2, 2023 at 9:08=E2=80=AFAM Adam Ford <aford173@gmail.com> wrote=
:
>
> This series fixes the blanking pack size and the PMS calculation.  It the=
n
> adds support to allows the DSIM to dynamically DPHY clocks, and support
> non-burst mode while allowing the removal of the hard-coded clock values
> for the PLL for imx8m mini/nano/plus, and it allows the removal of the
> burst-clock device tree entry when burst-mode isn't supported by connecte=
d
> devices like an HDMI brige.  In that event, the HS clock is set to the va=
lue
> requested by the bridge chip.
>
> This has been tested on both an i.MX8M Nano and i.MX8M Plus, and should w=
ork
> on i.MX8M Mini as well.
>
> Adam Ford (6):
>   drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]
>   drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically
>   drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY
>   drm: bridge: samsung-dsim: Dynamically configure DPHY timing
>   drm: bridge: samsung-dsim: Support non-burst mode
>   drm: bridge: samsung-dsim: Let blanking calcuation work in non-burst
>     mode
>
> Lucas Stach (1):
>   drm: bridge: samsung-dsim: fix blanking packet size calculation

Still works, so whole series is

Tested-by: Chen-Yu Tsai <wenst@chromium.org>

on i.MX8M Mini based Hummingboard Pulse.