Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <ca4da3c1-29dd-6d7d-6fe6-dd6ecc7fff88@quicinc.com>
Date:   Tue, 2 May 2023 14:07:17 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.1
Subject: Re: [PATCH v7 7/9] arm64: dts: qcom: sc8280xp: Add multiport
 controller node for SC8280
Content-Language: en-US
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Andy Gross <agross@kernel.org>,
        "Bjorn Andersson" <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Felipe Balbi <balbi@kernel.org>,
        "Wesley Cheng" <quic_wcheng@quicinc.com>
CC:     <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <quic_pkondeti@quicinc.com>, <quic_ppratap@quicinc.com>,
        <quic_jackp@quicinc.com>, <quic_harshq@quicinc.com>,
        <ahalaney@redhat.com>, <quic_shazhuss@quicinc.com>
References: <20230501143445.3851-1-quic_kriskura@quicinc.com>
 <20230501143445.3851-8-quic_kriskura@quicinc.com>
 <57d2405f-7bd2-0ca3-a119-55b7bf0f36f9@linaro.org>
From:   Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
In-Reply-To: <57d2405f-7bd2-0ca3-a119-55b7bf0f36f9@linaro.org>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 5/2/2023 1:17 PM, Krzysztof Kozlowski wrote:
> On 01/05/2023 16:34, Krishna Kurapati wrote:
>> Add USB and DWC3 node for tertiary port of SC8280 along with multiport
>> IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride
>> platforms.
>>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 64 ++++++++++++++++++++++++++
>>   1 file changed, 64 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> index 8fa9fbfe5d00..0e4fb286956b 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> @@ -3133,6 +3133,70 @@ usb_1_role_switch: endpoint {
>>   			};
>>   		};
>>   
>> +		usb_2: usb@a4f8800 {
> 
> Nodes are ordered by unit address, more or less >
>> +			compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
>> +			reg = <0 0x0a4f8800 0 0x400>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +
>> +			clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
>> +				 <&gcc GCC_USB30_MP_MASTER_CLK>,
>> +				 <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
>> +				 <&gcc GCC_USB30_MP_SLEEP_CLK>,
>> +				 <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
>> +				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
>> +				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
>> +			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
>> +				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
>> +
>> +			assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
>> +					  <&gcc GCC_USB30_MP_MASTER_CLK>;
>> +			assigned-clock-rates = <19200000>, <200000000>;
>> +
>> +			interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>,
>> +						<&pdc 126 IRQ_TYPE_EDGE_RISING>,
>> +						<&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
>> +						<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
>> +						<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
>> +						<GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
>> +						<GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
> 
> Does not look aligned. >
>> +
>> +			interrupt-names = "dp_hs_phy_irq", "dm_hs_phy_irq",
>> +						"ss_phy_irq", "pwr_event_1",
> 
> Does not look aligned.
> 
Sure, will fix up the indentation issues.
>> +						"pwr_event_2", "pwr_event_3",
>> +						"pwr_event_4";
>> +
>> +			power-domains = <&gcc USB30_MP_GDSC>;
>> +
>> +			resets = <&gcc GCC_USB30_MP_BCR>;
>> +
>> +			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
>> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
>> +			interconnect-names = "usb-ddr", "apps-usb";
>> +
>> +			required-opps = <&rpmhpd_opp_nom>;
>> +
> 
> Please open the DTSI and look how this is organized there. I don't think
> doing this differently - with different order - helps to review.
> required-opps is next to power-domains.
Sure. Will fix it up.
> 
>> +			status = "disabled";
>> +
>> +			usb_2_dwc3: usb@a400000 {
>> +				compatible = "snps,dwc3";
>> +				reg = <0 0x0a400000 0 0xcd00>;
>> +				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>> +				iommus = <&apps_smmu 0x800 0x0>;
>> +				phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
>> +					<&usb_2_hsphy1>, <&usb_2_qmpphy1>,
>> +					<&usb_2_hsphy2>,
>> +					<&usb_2_hsphy3>;
>> +				phy-names = "usb2-port0", "usb3-port0",
>> +						"usb2-port1", "usb3-port1",
>> +						"usb2-port2",
>> +						"usb2-port3";
>> +			};
>> +		};
>> +
>>   		mdss0: display-subsystem@ae00000 {
>>   			compatible = "qcom,sc8280xp-mdss";
>>   			reg = <0 0x0ae00000 0 0x1000>;
> 

Thanks,
Krishna,