Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <efacbaab-3d47-8b6f-9804-6009373396e1@linaro.org>
Date:   Tue, 2 May 2023 12:21:44 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.1
Subject: Re: [PATCH 5/5] ARM: dts: qcom: apq8026-huawei-sturgeon: Add vibrator
Content-Language: en-US
To:     Luca Weiss <luca@z3ntu.xyz>, ~postmarketos/upstreaming@lists.sr.ht,
        phone-devel@vger.kernel.org,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Dan Murphy <dmurphy@ti.com>, Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Raffaele Tranquillini <raffaele.tranquillini@gmail.com>,
        Yassine Oudjana <y.oudjana@protonmail.com>
Cc:     linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
References: <20230430-drv260x-improvements-v1-0-1fb28b4cc698@z3ntu.xyz>
 <20230430-drv260x-improvements-v1-5-1fb28b4cc698@z3ntu.xyz>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20230430-drv260x-improvements-v1-5-1fb28b4cc698@z3ntu.xyz>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 30.04.2023 20:20, Luca Weiss wrote:
> The watch has a DRV2605 for haptics. Add a node for it based on the
> values found in the downstream board file.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts | 28 ++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
> index d64096028ab1..eb73b992a696 100644
> --- a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
> +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
> @@ -7,6 +7,7 @@
>  
>  #include "qcom-msm8226.dtsi"
>  #include "qcom-pm8226.dtsi"
> +#include <dt-bindings/input/ti-drv260x.h>
>  
>  /delete-node/ &adsp_region;
>  
> @@ -68,6 +69,26 @@ &adsp {
>  	status = "okay";
>  };
>  
> +&blsp1_i2c2 {
> +	clock-frequency = <384000>;
> +
> +	status = "okay";
> +
> +	vibrator@5a {
> +		compatible = "ti,drv2605";
> +		reg = <0x5a>;
> +		enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
> +
> +		mode = <DRV260X_ERM_MODE>;
> +		library-sel = <DRV260X_ERM_LIB_D>;
> +		vib-rated-mv = <2765>;
> +		vib-overdrive-mv = <3525>;
> +
> +		pinctrl-0 = <&vibrator_default_state>;
> +		pinctrl-names = "default";
> +	};
> +};
> +
>  &blsp1_i2c5 {
>  	clock-frequency = <384000>;
>  
> @@ -347,6 +368,13 @@ reset-pins {
>  		};
>  	};
>  
> +	vibrator_default_state: vibrator-default-state {
> +		pins = "gpio59", "gpio60";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-pull-down;
> +	};
> +
>  	wlan_hostwake_default_state: wlan-hostwake-default-state {
>  		pins = "gpio66";
>  		function = "gpio";
>