Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <51f877c8-e536-2c79-9494-23030911d851@linaro.org>
Date:   Thu, 4 May 2023 10:13:36 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.1
Subject: Re: [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning
 properties
Content-Language: en-US
To:     Johannes Zink <j.zink@pengutronix.de>,
        Rob Herring <robh@kernel.org>
Cc:     kishon@kernel.org, devicetree@vger.kernel.org,
        krzysztof.kozlowski+dt@linaro.org, festevam@gmail.com,
        s.hauer@pengutronix.de, vkoul@kernel.org, haibo.chen@nxp.com,
        linux-kernel@vger.kernel.org, linux-imx@nxp.com,
        kernel@pengutronix.de, linux-phy@lists.infradead.org,
        shawnguo@kernel.org, linux-arm-kernel@lists.infradead.org,
        jun.li@nxp.com, patchwork-jzi@pengutronix.de
References: <20230405112118.1256151-1-j.zink@pengutronix.de>
 <20230405112118.1256151-2-j.zink@pengutronix.de>
 <5398cbe0-c681-5dd7-0b3e-3a586cc4915f@linaro.org>
 <3f7257ee36dc44f162a87281c8279fd5bad91dea.camel@pengutronix.de>
 <95b4afd4-c93e-628b-fd22-6fcbc1d1234e@linaro.org>
 <b394b456540943b1022a7b093bf369924fca0566.camel@pengutronix.de>
 <20230412133921.GA2017891-robh@kernel.org>
 <6953b608-973f-c603-f852-edf7ba183e64@pengutronix.de>
 <67d283f3-d0db-5fc0-79e9-e7531d591aab@pengutronix.de>
 <0a5d631a-037e-5158-82dd-e53d478befea@pengutronix.de>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <0a5d631a-037e-5158-82dd-e53d478befea@pengutronix.de>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 04/05/2023 09:32, Johannes Zink wrote:
> Hi Rob, hi Krzysztof,
> 
> [snip]
>  > gentle ping - any opinions on this? Shall I just send a V2 along the 
> lines of the phy-stm32-usbphy.c?
> 
> This would be something like (example for the trim-hs-current, taken 
> from pyh-stm32-usbphyc):
> 
>        st,trim-hs-current:
>          description: |
>            Controls HS driver current trimming for choke compensation
>            - <0> = 18.87 mA target current / nominal + 0%
>            - <1> = 19.165 mA target current / nominal + 1.56%
>            - <2> = 19.46 mA target current / nominal + 3.12%
>            - <3> = 19.755 mA target current / nominal + 4.68%
>            - <4> = 20.05 mA target current / nominal + 6.24%
>            - <5> = 20.345 mA target current / nominal + 7.8%
>            - <6> = 20.64 mA target current / nominal + 9.36%
>            - <7> = 20.935 mA target current / nominal + 10.92%
>            - <8> = 21.23 mA target current / nominal + 12.48%
>            - <9> = 21.525 mA target current / nominal + 14.04%
>            - <10> = 21.82 mA target current / nominal + 15.6%
>            - <11> = 22.115 mA target current / nominal + 17.16%
>            - <12> = 22.458 mA target current / nominal + 19.01%
>            - <13> = 22.755 mA target current / nominal + 20.58%
>            - <14> = 23.052 mA target current / nominal + 22.16%
>            - <15> = 23.348 mA target current / nominal + 23.73%
>          $ref: /schemas/types.yaml#/definitions/uint32
>          minimum: 0
>          maximum: 15
>          default: 0
> 
> If you think something along these lines is acceptable, I would like to 
> prepare and send a V2.
> 

Go with Rob's approach, so something as you wrote above.

Best regards,
Krzysztof