Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <50c37e0c-3171-bce2-d97e-371150e1854f@quicinc.com>
Date:   Thu, 4 May 2023 23:33:44 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.9.1
Subject: Re: [PATCH v7 9/9] arm64: dts: qcom: sa8540-ride: Enable first port
 of tertiary usb controller
To:     Konrad Dybcio <konrad.dybcio@linaro.org>,
        Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Andy Gross <agross@kernel.org>,
        "Bjorn Andersson" <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
        Felipe Balbi <balbi@kernel.org>,
        Wesley Cheng <quic_wcheng@quicinc.com>
CC:     <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <quic_pkondeti@quicinc.com>, <quic_ppratap@quicinc.com>,
        <quic_jackp@quicinc.com>, <quic_harshq@quicinc.com>,
        <ahalaney@redhat.com>, <quic_shazhuss@quicinc.com>
References: <20230501143445.3851-1-quic_kriskura@quicinc.com>
 <20230501143445.3851-10-quic_kriskura@quicinc.com>
 <0e76a9f6-f062-2802-d9de-3c0b2b897a4e@linaro.org>
Content-Language: en-US
From:   Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
In-Reply-To: <0e76a9f6-f062-2802-d9de-3c0b2b897a4e@linaro.org>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 5/2/2023 4:37 PM, Konrad Dybcio wrote:
> 
> 
> On 1.05.2023 16:34, Krishna Kurapati wrote:
>> There is now support for the multiport USB controller this uses so
>> enable it.
>>
>> The board only has a single port hooked up (despite it being wired up to
>> the multiport IP on the SoC). There's also a USB 2.0 mux hooked up,
>> which by default on boot is selected to mux properly. Grab the gpio
>> controlling that and ensure it stays in the right position so USB 2.0
>> continues to be routed from the external port to the SoC.
>>
>> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> ---
> same comments as patch 8
> 
> Konrad

Hi Konrad,

   Sure, will add a default value for drive-strength for this pinctrl node.

Hi Andrew Halaney,

  I currently don't have a Ride device with me to test this change. Can 
you help test this patch on SA8540-Ride including (drive-strength = 
<2>;) property (which I believe is the default value).

I can test the same on SA8295-ADP and can push the next version quickly.

Regards,
Krishna,

>>   arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 22 ++++++++++++++++++++++
>>   1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
>> index 24fa449d48a6..53d47593306e 100644
>> --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
>> +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
>> @@ -309,6 +309,19 @@ &usb_2_qmpphy0 {
>>   	status = "okay";
>>   };
>>   
>> +&usb_2 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&usb2_en_state>;
>> +
>> +	status = "okay";
>> +};
>> +
>> +&usb_2_dwc3 {
>> +	dr_mode = "host";
>> +	phy-names = "usb2-port0", "usb3-port0";
>> +	phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>;
>> +};
>> +
>>   &xo_board_clk {
>>   	clock-frequency = <38400000>;
>>   };
>> @@ -401,4 +414,13 @@ wake-pins {
>>   			bias-pull-up;
>>   		};
>>   	};
>> +
>> +	usb2_en_state: usb2-en-state {
>> +		/* TS3USB221A USB2.0 mux select */
>> +		pins = "gpio24";
>> +		function = "gpio";
>> +		drive-strength = <2>;
>> +		bias-disable;
>> +		output-low;
>> +	};
>>   };