Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Dylan Van Assche <me@dylanvanassche.be>
To:     pavel@ucw.cz, quic_fenglinw@quicinc.com, lee@kernel.org
Cc:     trix@redhat.com, linux-leds@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        Dylan Van Assche <me@dylanvanassche.be>
Subject: [PATCH 2/2] leds: flash: leds-qcom-flash: disable LED when changing brightness
Date:   Sun,  7 May 2023 19:29:41 +0200
Message-Id: <20230507172941.364852-3-me@dylanvanassche.be>
In-Reply-To: <20230507172941.364852-1-me@dylanvanassche.be>
References: <20230507172941.364852-1-me@dylanvanassche.be>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The Qualcomm PMI8998 PMIC requires the LED to be disabled when configuring
the brightness. Always disable the LED when setting the brightness and
re-enable it afterwards.

Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
---
 drivers/leds/flash/leds-qcom-flash.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
index 16045b5d89b1..c8d41a3caf38 100644
--- a/drivers/leds/flash/leds-qcom-flash.c
+++ b/drivers/leds/flash/leds-qcom-flash.c
@@ -417,6 +417,14 @@ static int qcom_flash_led_brightness_set(struct led_classdev *led_cdev,
 	bool enable = !!brightness;
 	int rc;
 
+	rc = set_flash_strobe(led, SW_STROBE, false);
+	if (rc)
+		return rc;
+
+	rc = set_flash_module_en(led, false);
+	if (rc)
+		return rc;
+
 	rc = set_flash_current(led, current_ma, TORCH_MODE);
 	if (rc)
 		return rc;
-- 
2.40.1