Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <a220e00d-0559-35d5-80e9-7e11e566851a@quicinc.com>
Date:   Mon, 8 May 2023 16:23:16 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.0
Subject: Re: [PATCH V3 4/6] arm64: dts: qcom: ipq9574: Add PCIe PHYs and
 controller nodes
To:     Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
CC:     <agross@kernel.org>, <andersson@kernel.org>,
        <konrad.dybcio@linaro.org>, <lpieralisi@kernel.org>,
        <kw@linux.com>, <robh@kernel.org>, <bhelgaas@google.com>,
        <krzysztof.kozlowski+dt@linaro.org>, <mturquette@baylibre.com>,
        <sboyd@kernel.org>, <mani@kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
        <linux-clk@vger.kernel.org>, <quic_srichara@quicinc.com>,
        <quic_sjaganat@quicinc.com>, <quic_kathirav@quicinc.com>,
        <quic_arajkuma@quicinc.com>, <quic_anusha@quicinc.com>,
        <quic_ipkumar@quicinc.com>
References: <20230421124938.21974-1-quic_devipriy@quicinc.com>
 <20230421124938.21974-5-quic_devipriy@quicinc.com>
 <CAA8EJppyro1wM3KmDU3DVjKCqXH5+KaNoT_7ObVuuYNMoZKpoA@mail.gmail.com>
Content-Language: en-US
From:   Devi Priya <quic_devipriy@quicinc.com>
In-Reply-To: <CAA8EJppyro1wM3KmDU3DVjKCqXH5+KaNoT_7ObVuuYNMoZKpoA@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 4/22/2023 5:49 AM, Dmitry Baryshkov wrote:
> On Fri, 21 Apr 2023 at 15:50, Devi Priya <quic_devipriy@quicinc.com> wrote:
>>
>> Add PCIe0, PCIe1, PCIe2, PCIe3 (and corresponding PHY) devices
>> found on IPQ9574 platform. The PCIe0 & PCIe1 are 1-lane Gen3
>> host whereas PCIe2 & PCIe3 are 2-lane Gen3 host.
>>
>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>> ---
>>   Changes in V3:
>>          - Fixed up the PCI I/O port ranges
>>
>>   arch/arm64/boot/dts/qcom/ipq9574.dtsi | 375 +++++++++++++++++++++++++-
>>   1 file changed, 370 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> index e757b57957cf..953a839a1141 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> @@ -6,8 +6,8 @@
>>    * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>    */
>>
>> -#include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>   #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
>>
>>   / {
>> @@ -116,6 +116,58 @@
>>                  #size-cells = <1>;
>>                  ranges = <0 0 0 0xffffffff>;
>>
>> +               pcie0_phy: phy@84000 {
>> +                       compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
>> +                       reg = <0x00084000 0x1000>;
>> +
>> +                       clocks = <&gcc GCC_PCIE0_AUX_CLK>,
>> +                                <&gcc GCC_PCIE0_AHB_CLK>,
>> +                                <&gcc GCC_ANOC_PCIE0_1LANE_M_CLK>,
>> +                                <&gcc GCC_SNOC_PCIE0_1LANE_S_CLK>,
>> +                                <&gcc GCC_PCIE0_PIPE_CLK>;
>> +                       clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe";
>> +
>> +                       assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
>> +                       assigned-clock-rates = <20000000>;
>> +
>> +                       resets = <&gcc GCC_PCIE0_PHY_BCR>,
>> +                                <&gcc GCC_PCIE0PHY_PHY_BCR>;
>> +                       reset-names = "phy", "common";
>> +
>> +                       #clock-cells = <0>;
>> +                       clock-output-names = "gcc_pcie0_pipe_clk_src";
>> +
>> +                       #phy-cells = <0>;
>> +                       status = "disabled";
>> +
>> +               };
>> +
>> +               pcie2_phy: phy@8c000 {
>> +                       compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
>> +                       reg = <0x0008c000 0x2000>;
>> +
>> +                       clocks = <&gcc GCC_PCIE2_AUX_CLK>,
>> +                                <&gcc GCC_PCIE2_AHB_CLK>,
>> +                                <&gcc GCC_ANOC_PCIE2_2LANE_M_CLK>,
>> +                                <&gcc GCC_SNOC_PCIE2_2LANE_S_CLK>,
>> +                                <&gcc GCC_PCIE2_PIPE_CLK>;
>> +                       clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe";
>> +
>> +                       assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
>> +                       assigned-clock-rates = <20000000>;
>> +
>> +                       resets = <&gcc GCC_PCIE2_PHY_BCR>,
>> +                                <&gcc GCC_PCIE2PHY_PHY_BCR>;
>> +                       reset-names = "phy", "common";
>> +
>> +                       #clock-cells = <0>;
>> +                       clock-output-names = "gcc_pcie2_pipe_clk_src";
>> +
>> +                       #phy-cells = <0>;
>> +                       status = "disabled";
>> +
>> +               };
>> +
>>                  rng: rng@e3000 {
>>                          compatible = "qcom,prng-ee";
>>                          reg = <0x000e3000 0x1000>;
>> @@ -123,6 +175,58 @@
>>                          clock-names = "core";
>>                  };
>>
>> +               pcie3_phy: phy@f4000 {
>> +                       compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
>> +                       reg = <0x000f4000 0x2000>;
>> +
>> +                       clocks = <&gcc GCC_PCIE3_AUX_CLK>,
>> +                                <&gcc GCC_PCIE3_AHB_CLK>,
>> +                                <&gcc GCC_ANOC_PCIE3_2LANE_M_CLK>,
>> +                                <&gcc GCC_SNOC_PCIE3_2LANE_S_CLK>,
>> +                                <&gcc GCC_PCIE3_PIPE_CLK>;
>> +                       clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe";
>> +
>> +                       assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
>> +                       assigned-clock-rates = <20000000>;
>> +
>> +                       resets = <&gcc GCC_PCIE3_PHY_BCR>,
>> +                                <&gcc GCC_PCIE3PHY_PHY_BCR>;
>> +                       reset-names = "phy", "common";
>> +
>> +                       #clock-cells = <0>;
>> +                       clock-output-names = "gcc_pcie3_pipe_clk_src";
>> +
>> +                       #phy-cells = <0>;
>> +                       status = "disabled";
>> +
>> +               };
>> +
>> +               pcie1_phy: phy@fc000 {
>> +                       compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
>> +                       reg = <0x000fc000 0x1000>;
>> +
>> +                       clocks = <&gcc GCC_PCIE1_AUX_CLK>,
>> +                                <&gcc GCC_PCIE1_AHB_CLK>,
>> +                                <&gcc GCC_ANOC_PCIE1_1LANE_M_CLK>,
>> +                                <&gcc GCC_SNOC_PCIE1_1LANE_S_CLK>,
>> +                                <&gcc GCC_PCIE1_PIPE_CLK>;
>> +                       clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe";
>> +
>> +                       assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
>> +                       assigned-clock-rates = <20000000>;
>> +
>> +                       resets = <&gcc GCC_PCIE1_PHY_BCR>,
>> +                                <&gcc GCC_PCIE1PHY_PHY_BCR>;
>> +                       reset-names = "phy", "common";
>> +
>> +                       #clock-cells = <0>;
>> +                       clock-output-names = "gcc_pcie1_pipe_clk_src";
>> +
>> +                       #phy-cells = <0>;
>> +                       status = "disabled";
>> +
>> +               };
>> +
>>                  tlmm: pinctrl@1000000 {
>>                          compatible = "qcom,ipq9574-tlmm";
>>                          reg = <0x01000000 0x300000>;
>> @@ -146,10 +250,10 @@
>>                          reg = <0x01800000 0x80000>;
>>                          clocks = <&xo_board_clk>,
>>                                   <&sleep_clk>,
>> -                                <0>,
>> -                                <0>,
>> -                                <0>,
>> -                                <0>,
>> +                                <&pcie0_phy>,
>> +                                <&pcie1_phy>,
>> +                                <&pcie2_phy>,
>> +                                <&pcie3_phy>,
>>                                   <0>;
>>                          #clock-cells = <1>;
>>                          #reset-cells = <1>;
>> @@ -478,6 +582,267 @@
>>                                  status = "disabled";
>>                          };
>>                  };
>> +
>> +               pcie1: pci@10000000 {
>> +                       compatible = "qcom,pcie-ipq9574";
>> +                       reg =  <0x10000000 0xf1d>,
>> +                              <0x10000F20 0xa8>,
>> +                              <0x10001000 0x1000>,
>> +                              <0x000F8000 0x4000>,
>> +                              <0x10100000 0x1000>;
>> +                       reg-names = "dbi", "elbi", "atu", "parf", "config";
>> +                       device_type = "pci";
>> +                       linux,pci-domain = <2>;
>> +                       bus-range = <0x00 0xff>;
>> +                       num-lanes = <1>;
>> +                       #address-cells = <3>;
>> +                       #size-cells = <2>;
>> +
>> +                       ranges = <0x01000000 0x0 0x00000000 0x10200000 0x0 0x100000>,  /* I/O */
>> +                                <0x02000000 0x0 0x10300000 0x10300000 0x0 0x7d00000>; /* MEM */
>> +
>> +                       #interrupt-cells = <1>;
>> +                       interrupt-map-mask = <0 0 0 0x7>;
>> +                       interrupt-map = <0 0 0 1 &intc 0 35 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
>> +                                       <0 0 0 2 &intc 0 49 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
>> +                                       <0 0 0 3 &intc 0 84 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
>> +                                       <0 0 0 4 &intc 0 85 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
>> +
> 
> No iommu-map?
We do not enable the IOMMU stage1 translation for PCIe and the registers
have secure access only from TrustZone (It enables only stage2 for
Access control)

Thanks,
Devi Priya
> 
>> +                       interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "global_irq";
>> +
>> +                       /* clocks and clock-names are used to enable the clock in CBCR */
>> +                       clocks = <&gcc GCC_PCIE1_AHB_CLK>,
>> +                                <&gcc GCC_PCIE1_AUX_CLK>,
>> +                                <&gcc GCC_PCIE1_AXI_M_CLK>,
>> +                                <&gcc GCC_PCIE1_AXI_S_CLK>,
>> +                                <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
>> +                                <&gcc GCC_PCIE1_RCHNG_CLK>;
>> +                       clock-names = "ahb",
>> +                                     "aux",
>> +                                     "axi_m",
>> +                                     "axi_s",
>> +                                     "axi_bridge",
>> +                                     "rchng";
>> +
>> +                       resets = <&gcc GCC_PCIE1_PIPE_ARES>,
>> +                                <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE1_AXI_S_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE1_AXI_S_ARES>,
>> +                                <&gcc GCC_PCIE1_AXI_M_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE1_AXI_M_ARES>,
>> +                                <&gcc GCC_PCIE1_AUX_ARES>,
>> +                                <&gcc GCC_PCIE1_AHB_ARES>;
>> +                       reset-names = "pipe",
>> +                                     "sticky",
>> +                                     "axi_s_sticky",
>> +                                     "axi_s",
>> +                                     "axi_m_sticky",
>> +                                     "axi_m",
>> +                                     "aux",
>> +                                     "ahb";
>> +
>> +                       phys = <&pcie1_phy>;
>> +                       phy-names = "pciephy";
>> +                       msi-parent = <&v2m0>;
>> +                       status = "disabled";
>> +               };
>> +
>> +               pcie3: pci@18000000 {
>> +                       compatible = "qcom,pcie-ipq9574";
>> +                       reg =  <0x18000000 0xf1d>,
>> +                              <0x18000F20 0xa8>,
>> +                              <0x18001000 0x1000>,
>> +                              <0x000F0000 0x4000>,
>> +                              <0x18100000 0x1000>;
>> +                       reg-names = "dbi", "elbi", "atu", "parf", "config";
>> +                       device_type = "pci";
>> +                       linux,pci-domain = <4>;
>> +                       bus-range = <0x00 0xff>;
>> +                       num-lanes = <2>;
>> +                       #address-cells = <3>;
>> +                       #size-cells = <2>;
>> +
>> +                       ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>,  /* I/O */
>> +                                <0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>; /* MEM */
>> +
>> +                       #interrupt-cells = <1>;
>> +                       interrupt-map-mask = <0 0 0 0x7>;
>> +                       interrupt-map = <0 0 0 1 &intc 0 189 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
>> +                                       <0 0 0 2 &intc 0 190 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
>> +                                       <0 0 0 3 &intc 0 191 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
>> +                                       <0 0 0 4 &intc 0 192 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
>> +
>> +                       interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "global_irq";
>> +
>> +                       /* clocks and clock-names are used to enable the clock in CBCR */
>> +                       clocks = <&gcc GCC_PCIE3_AHB_CLK>,
>> +                                <&gcc GCC_PCIE3_AUX_CLK>,
>> +                                <&gcc GCC_PCIE3_AXI_M_CLK>,
>> +                                <&gcc GCC_PCIE3_AXI_S_CLK>,
>> +                                <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
>> +                                <&gcc GCC_PCIE3_RCHNG_CLK>;
>> +                       clock-names = "ahb",
>> +                                     "aux",
>> +                                     "axi_m",
>> +                                     "axi_s",
>> +                                     "axi_bridge",
>> +                                     "rchng";
>> +
>> +                       resets = <&gcc GCC_PCIE3_PIPE_ARES>,
>> +                                <&gcc GCC_PCIE3_CORE_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE3_AXI_S_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE3_AXI_S_ARES>,
>> +                                <&gcc GCC_PCIE3_AXI_M_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE3_AXI_M_ARES>,
>> +                                <&gcc GCC_PCIE3_AUX_ARES>,
>> +                                <&gcc GCC_PCIE3_AHB_ARES>;
>> +                       reset-names = "pipe",
>> +                                     "sticky",
>> +                                     "axi_s_sticky",
>> +                                     "axi_s",
>> +                                     "axi_m_sticky",
>> +                                     "axi_m",
>> +                                     "aux",
>> +                                     "ahb";
>> +
>> +                       phys = <&pcie3_phy>;
>> +                       phy-names = "pciephy";
>> +                       msi-parent = <&v2m0>;
>> +                       status = "disabled";
>> +               };
>> +
>> +               pcie2: pci@20000000 {
>> +                       compatible = "qcom,pcie-ipq9574";
>> +                       reg =  <0x20000000 0xf1d>,
>> +                              <0x20000F20 0xa8>,
>> +                              <0x20001000 0x1000>,
>> +                              <0x00088000 0x4000>,
>> +                              <0x20100000 0x1000>;
>> +                       reg-names = "dbi", "elbi", "atu", "parf", "config";
>> +                       device_type = "pci";
>> +                       linux,pci-domain = <3>;
>> +                       bus-range = <0x00 0xff>;
>> +                       num-lanes = <2>;
>> +                       #address-cells = <3>;
>> +                       #size-cells = <2>;
>> +
>> +                       ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x100000>,  /* I/O */
>> +                                <0x02000000 0x0 0x20300000 0x20300000 0x0 0x7d00000>; /* MEM */
>> +
>> +                       #interrupt-cells = <1>;
>> +                       interrupt-map-mask = <0 0 0 0x7>;
>> +                       interrupt-map = <0 0 0 1 &intc 0 164 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
>> +                                       <0 0 0 2 &intc 0 165 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
>> +                                       <0 0 0 3 &intc 0 186 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
>> +                                       <0 0 0 4 &intc 0 187 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
>> +
>> +                       interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "global_irq";
>> +
>> +                       /* clocks and clock-names are used to enable the clock in CBCR */
>> +                       clocks = <&gcc GCC_PCIE2_AHB_CLK>,
>> +                                <&gcc GCC_PCIE2_AUX_CLK>,
>> +                                <&gcc GCC_PCIE2_AXI_M_CLK>,
>> +                                <&gcc GCC_PCIE2_AXI_S_CLK>,
>> +                                <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
>> +                                <&gcc GCC_PCIE2_RCHNG_CLK>;
>> +                       clock-names = "ahb",
>> +                                     "aux",
>> +                                     "axi_m",
>> +                                     "axi_s",
>> +                                     "axi_bridge",
>> +                                     "rchng";
>> +
>> +                       resets = <&gcc GCC_PCIE2_PIPE_ARES>,
>> +                                <&gcc GCC_PCIE2_CORE_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE2_AXI_S_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE2_AXI_S_ARES>,
>> +                                <&gcc GCC_PCIE2_AXI_M_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE2_AXI_M_ARES>,
>> +                                <&gcc GCC_PCIE2_AUX_ARES>,
>> +                                <&gcc GCC_PCIE2_AHB_ARES>;
>> +                       reset-names = "pipe",
>> +                                     "sticky",
>> +                                     "axi_s_sticky",
>> +                                     "axi_s",
>> +                                     "axi_m_sticky",
>> +                                     "axi_m",
>> +                                     "aux",
>> +                                     "ahb";
>> +
>> +                       phys = <&pcie2_phy>;
>> +                       phy-names = "pciephy";
>> +                       msi-parent = <&v2m0>;
>> +                       status = "disabled";
>> +               };
>> +
>> +               pcie0: pci@28000000 {
>> +                       compatible = "qcom,pcie-ipq9574";
>> +                       reg =  <0x28000000 0xf1d>,
>> +                              <0x28000F20 0xa8>,
>> +                              <0x28001000 0x1000>,
>> +                              <0x00080000 0x4000>,
>> +                              <0x28100000 0x1000>;
>> +                       reg-names = "dbi", "elbi", "atu", "parf", "config";
>> +                       device_type = "pci";
>> +                       linux,pci-domain = <1>;
>> +                       bus-range = <0x00 0xff>;
>> +                       num-lanes = <1>;
>> +                       #address-cells = <3>;
>> +                       #size-cells = <2>;
>> +
>> +                       ranges = <0x01000000 0x0 0x00000000 0x28200000 0x0 0x100000>,  /* I/O */
>> +                                <0x02000000 0x0 0x28300000 0x28300000 0x0 0x7d00000>; /* MEM */
>> +
>> +                       #interrupt-cells = <1>;
>> +                       interrupt-map-mask = <0 0 0 0x7>;
>> +                       interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
>> +                                       <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
>> +                                       <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
>> +                                       <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
>> +
>> +                       interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
>> +                       interrupt-names = "global_irq";
>> +
>> +                       /* clocks and clock-names are used to enable the clock in CBCR */
>> +                       clocks = <&gcc GCC_PCIE0_AHB_CLK>,
>> +                                <&gcc GCC_PCIE0_AUX_CLK>,
>> +                                <&gcc GCC_PCIE0_AXI_M_CLK>,
>> +                                <&gcc GCC_PCIE0_AXI_S_CLK>,
>> +                                <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
>> +                                <&gcc GCC_PCIE0_RCHNG_CLK>;
>> +                       clock-names = "ahb",
>> +                                     "aux",
>> +                                     "axi_m",
>> +                                     "axi_s",
>> +                                     "axi_bridge",
>> +                                     "rchng";
>> +
>> +                       resets = <&gcc GCC_PCIE0_PIPE_ARES>,
>> +                                <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE0_AXI_S_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE0_AXI_S_ARES>,
>> +                                <&gcc GCC_PCIE0_AXI_M_STICKY_ARES>,
>> +                                <&gcc GCC_PCIE0_AXI_M_ARES>,
>> +                                <&gcc GCC_PCIE0_AUX_ARES>,
>> +                                <&gcc GCC_PCIE0_AHB_ARES>;
>> +                       reset-names = "pipe",
>> +                                     "sticky",
>> +                                     "axi_s_sticky",
>> +                                     "axi_s",
>> +                                     "axi_m_sticky",
>> +                                     "axi_m",
>> +                                     "aux",
>> +                                     "ahb";
>> +
>> +                       phys = <&pcie0_phy>;
>> +                       phy-names = "pciephy";
>> +                       msi-parent = <&v2m0>;
>> +                       status = "disabled";
>> +               };
>> +
>>          };
>>
>>          timer {
>> --
>> 2.17.1
>>
> 
>