Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Date:   Mon, 08 May 2023 15:13:39 +0200
Subject: [PATCH v4 2/6] thermal: qcom: tsens-v0_1: Fix mdm9607 slope values
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20230508-msm8909-tsens-v4-2-d9119622cb19@kernkonzept.com>
References: <20230508-msm8909-tsens-v4-0-d9119622cb19@kernkonzept.com>
In-Reply-To: <20230508-msm8909-tsens-v4-0-d9119622cb19@kernkonzept.com>
To:     Daniel Lezcano <daniel.lezcano@linaro.org>
Cc:     Amit Kucheria <amitk@kernel.org>,
        Thara Gopinath <thara.gopinath@gmail.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        Zhang Rui <rui.zhang@intel.com>,
        Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
        linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
        Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Precedence: bulk

According to the msm-3.18 vendor kernel from Qualcomm [1], mdm9607 uses
a non-standard slope value of 3000 (instead of 3200) for all sensors.
Fill it properly similar to the 8939 code added recently.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/blob/LE.UM.4.3.2.r1-04200-9x07/arch/arm/boot/dts/qcom/mdm9607.dtsi#L875

Fixes: a2149ab815fc ("thermal/drivers/qcom/tsens-v0_1: Add support for MDM9607")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
---
 drivers/thermal/qcom/tsens-v0_1.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 106d26076e3f..1b454de3928d 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -222,6 +222,16 @@ static int __init init_8939(struct tsens_priv *priv) {
 	return init_common(priv);
 }
 
+static int __init init_9607(struct tsens_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->num_sensors; ++i)
+		priv->sensor[i].slope = 3000;
+
+	return init_common(priv);
+}
+
 /* v0.1: 8916, 8939, 8974, 9607 */
 
 static struct tsens_features tsens_v0_1_feat = {
@@ -271,12 +281,6 @@ static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
 	[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
 };
 
-static const struct tsens_ops ops_v0_1 = {
-	.init		= init_common,
-	.calibrate	= tsens_calibrate_common,
-	.get_temp	= get_temp_common,
-};
-
 static const struct tsens_ops ops_8916 = {
 	.init		= init_common,
 	.calibrate	= calibrate_8916,
@@ -320,9 +324,15 @@ struct tsens_plat_data data_8974 = {
 	.fields	= tsens_v0_1_regfields,
 };
 
+static const struct tsens_ops ops_9607 = {
+	.init		= init_9607,
+	.calibrate	= tsens_calibrate_common,
+	.get_temp	= get_temp_common,
+};
+
 struct tsens_plat_data data_9607 = {
 	.num_sensors	= 5,
-	.ops		= &ops_v0_1,
+	.ops		= &ops_9607,
 	.feat		= &tsens_v0_1_feat,
 	.fields	= tsens_v0_1_regfields,
 };

-- 
2.30.2