Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Herve Codina <herve.codina@bootlin.com>
To:     Herve Codina <herve.codina@bootlin.com>,
        Jonathan Cameron <jic23@kernel.org>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Christophe Leroy <christophe.leroy@csgroup.eu>,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v4 0/3] Add the Renesas X9250 potentiometers IIO support
Date:   Tue,  9 May 2023 18:08:49 +0200
Message-Id: <20230509160852.158101-1-herve.codina@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi,

The Renesas X9250 integrated four digitally controlled potentiometers.
On each potentiometer, the X9250T has a 100 kOhms total resistance and
the X9250U has a 50 kOhms total resistance.

Compare to the previous iteration
  https://lore.kernel.org/linux-kernel/20230421085245.302169-1-herve.codina@bootlin.com/
This v4 series updates the binding, introduced the power-supply
regulators and the write-protect gpio, uses spi_write_then_read(),
removes spi_get_device_id(spi)->name, removes spi_set_drvdata() call.

Best regards,
Herve Codina

Changes v3 -> v4
  - Patch 1
    Remove iio.yaml.
    Add 'vcc-supply', 'avp-supply' and 'avn-supply'.
    Add 'wp-gpios'

  - Patch 2
    Get and enable the regulators.
    Manage the write-protect gpio.
    Use spi_write_then_read().
    Remove the unneeded spi_setup() call.
    Get name from field added in struct x9250_cfg instead of
    spi_get_device_id(spi)->name.

  - Patch 3
    No changes

Changes v2 -> v3
  - Patch 1
    Remove the reg property description
    Use 'potentiometer' for the node name in the example.

  - Patch 2 and 3
    No changes

Changes v1 -> v2
  - Patch 1
    No changes

  - Patch 2
    Use a define for the 0x50 value used multiple times.

  - Patch 3
    No changes

Herve Codina (3):
  dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometers
  iio: potentiometer: Add support for the Renesas X9250 potentiometers
  MAINTAINERS: add the Renesas X9250 driver entry

 .../iio/potentiometer/renesas,x9250.yaml      |  78 ++++++
 MAINTAINERS                                   |   7 +
 drivers/iio/potentiometer/Kconfig             |  10 +
 drivers/iio/potentiometer/Makefile            |   1 +
 drivers/iio/potentiometer/x9250.c             | 223 ++++++++++++++++++
 5 files changed, 319 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
 create mode 100644 drivers/iio/potentiometer/x9250.c

-- 
2.40.1