Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <3bb6c544-0b21-4728-683d-70db0f80394f@linaro.org>
Date:   Fri, 12 May 2023 08:36:39 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.11.0
Subject: Re: [PATCH v4 6/7] riscv: dts: starfive: jh7110: Add syscon nodes
Content-Language: en-US
To:     Xingyu Wu <xingyu.wu@starfivetech.com>,
        linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Conor Dooley <conor@kernel.org>,
        Emil Renner Berthing <kernel@esmil.dk>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Paul Walmsley <paul.walmsley@sifive.com>,
        Palmer Dabbelt <palmer@dabbelt.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        Hal Feng <hal.feng@starfivetech.com>,
        William Qiu <william.qiu@starfivetech.com>,
        linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org
References: <20230512022036.97987-1-xingyu.wu@starfivetech.com>
 <20230512022036.97987-7-xingyu.wu@starfivetech.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20230512022036.97987-7-xingyu.wu@starfivetech.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 12/05/2023 04:20, Xingyu Wu wrote:
> From: William Qiu <william.qiu@starfivetech.com>
> 
> Add stg_syscon/sys_syscon/aon_syscon nodes for JH7110 Soc.
> 
> Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
> Signed-off-by: William Qiu <william.qiu@starfivetech.com>
> ---
>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index 4c5fdb905da8..fa27fd4169a8 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -353,6 +353,11 @@ i2c2: i2c@10050000 {
>  			status = "disabled";
>  		};
>  
> +		stg_syscon: syscon@10240000 {
> +			compatible = "starfive,jh7110-stg-syscon", "syscon";
> +			reg = <0x0 0x10240000 0x0 0x1000>;
> +		};
> +
>  		uart3: serial@12000000 {
>  			compatible = "snps,dw-apb-uart";
>  			reg = <0x0 0x12000000 0x0 0x10000>;
> @@ -457,6 +462,11 @@ syscrg: clock-controller@13020000 {
>  			#reset-cells = <1>;
>  		};
>  
> +		sys_syscon: syscon@13030000 {
> +			compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
> +			reg = <0x0 0x13030000 0x0 0x1000>;

No children, drop the simple-mfd. Or your binding is incorrect or your
DTS is incomplete (you mentioned clock-controller). DTS should be complete.

Best regards,
Krzysztof