Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 12 May 2023 14:14:41 +0000
In-Reply-To: <20230512141445.2026660-1-joychakr@google.com>
Mime-Version: 1.0
References: <20230512141445.2026660-1-joychakr@google.com>
Message-ID: <20230512141445.2026660-3-joychakr@google.com>
Subject: [PATCH v2 2/6] dmaengine: pl330: Use FFS to calculate burst size
From:   Joy Chakraborty <joychakr@google.com>
To:     Vinod Koul <vkoul@kernel.org>
Cc:     dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, manugautam@google.com,
        danielmentz@google.com, sjadavani@google.com,
        Joy Chakraborty <joychakr@google.com>
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Use __ffs to calculate burst size in pl330_prep_dma_memcpy() for
consistency across the driver as other functions already use __ffs for
the same functionality.

Signed-off-by: Joy Chakraborty <joychakr@google.com>
---
 drivers/dma/pl330.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index c006e481b4c5..39a66ff29e27 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2804,10 +2804,7 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
 	while ((src | dst | len) & (burst - 1))
 		burst /= 2;
 
-	desc->rqcfg.src_brst_size = 0;
-	while (burst != (1 << desc->rqcfg.src_brst_size))
-		desc->rqcfg.src_brst_size++;
-
+	desc->rqcfg.src_brst_size = __ffs(burst);
 	desc->rqcfg.src_brst_len = get_burst_len(desc, len);
 	/*
 	 * If burst size is smaller than bus width then make sure we only
-- 
2.40.1.606.ga4b1b128d6-goog