Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krishna Kurapati <quic_kriskura@quicinc.com>
To:     Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        "Andy Gross" <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        "Konrad Dybcio" <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Felipe Balbi <balbi@kernel.org>
CC:     <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <quic_pkondeti@quicinc.com>, <quic_ppratap@quicinc.com>,
        <quic_wcheng@quicinc.com>, <quic_jackp@quicinc.com>,
        <quic_harshq@quicinc.com>, <ahalaney@redhat.com>,
        Krishna Kurapati <quic_kriskura@quicinc.com>
Subject: [PATCH v8 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280
Date:   Sun, 14 May 2023 11:19:15 +0530
Message-ID: <20230514054917.21318-8-quic_kriskura@quicinc.com>
In-Reply-To: <20230514054917.21318-1-quic_kriskura@quicinc.com>
References: <20230514054917.21318-1-quic_kriskura@quicinc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Add USB and DWC3 node for tertiary port of SC8280 along with multiport
IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride
platforms.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 66 ++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 8fa9fbfe5d00..50f6a8424537 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3133,6 +3133,72 @@ usb_1_role_switch: endpoint {
 			};
 		};
 
+		usb_2: usb@a4f8800 {
+			compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3";
+			reg = <0 0x0a4f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
+				 <&gcc GCC_USB30_MP_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MP_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 126 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq",
+					  "pwr_event_1",
+					  "pwr_event_2",
+					  "pwr_event_3",
+					  "pwr_event_4";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_MP_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a400000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x800 0x0>;
+				phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>,
+					<&usb_2_hsphy1>, <&usb_2_qmpphy1>,
+					<&usb_2_hsphy2>,
+					<&usb_2_hsphy3>;
+				phy-names = "usb2-port0", "usb3-port0",
+						"usb2-port1", "usb3-port1",
+						"usb2-port2",
+						"usb2-port3";
+			};
+		};
+
 		mdss0: display-subsystem@ae00000 {
 			compatible = "qcom,sc8280xp-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
-- 
2.40.0