Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>, netdev@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v5] dt-bindings: net: nxp,sja1105: document spi-cpol/cpha
Date:   Mon, 15 May 2023 09:45:25 +0200
Message-Id: <20230515074525.53592-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Some boards use SJA1105 Ethernet Switch with SPI CPHA, while ones with
SJA1110 use SPI CPOL, so document this to fix dtbs_check warnings:

  arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

---

Changes since v4:
1. Order compatibles.
2. Add tag.

Changes since v3:
1. Rebase.
2. Require cpha/cpol properties on respective variants (thus update
   example).

Changes since v2:
1. Add allOf:if:then, based on feedback from Vladimir.

Changes since v1:
1. Add also cpha.
---
 .../bindings/net/dsa/nxp,sja1105.yaml         | 32 ++++++++++++++++---
 1 file changed, 28 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index 9a64ed658745..4d5f5cc6d031 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -12,10 +12,6 @@ description:
   cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
   depends on the SPI bus master driver.
 
-allOf:
-  - $ref: dsa.yaml#/$defs/ethernet-ports
-  - $ref: /schemas/spi/spi-peripheral-props.yaml#
-
 maintainers:
   - Vladimir Oltean <vladimir.oltean@nxp.com>
 
@@ -36,6 +32,9 @@ properties:
   reg:
     maxItems: 1
 
+  spi-cpha: true
+  spi-cpol: true
+
   # Optional container node for the 2 internal MDIO buses of the SJA1110
   # (one for the internal 100base-T1 PHYs and the other for the single
   # 100base-TX PHY). The "reg" property does not have physical significance.
@@ -109,6 +108,30 @@ $defs:
        1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080,
        2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260]
 
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nxp,sja1105e
+            - nxp,sja1105p
+            - nxp,sja1105q
+            - nxp,sja1105r
+            - nxp,sja1105s
+            - nxp,sja1105t
+    then:
+      properties:
+        spi-cpol: false
+      required:
+        - spi-cpha
+    else:
+      properties:
+        spi-cpha: false
+      required:
+        - spi-cpol
+
 unevaluatedProperties: false
 
 examples:
@@ -120,6 +143,7 @@ examples:
             ethernet-switch@1 {
                     reg = <0x1>;
                     compatible = "nxp,sja1105t";
+                    spi-cpha;
 
                     ethernet-ports {
                             #address-cells = <1>;
-- 
2.34.1