Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH 0/5] QTI RB2 features
Date:   Mon, 15 May 2023 15:04:11 +0200
Message-Id: <20230515-topic-rb2-bits-v1-0-a52d154a639d@linaro.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Bhupesh Sharma <bhupesh.sharma@linaro.org>
Cc:     Marijn Suijten <marijn.suijten@somainline.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Konrad Dybcio <konrad.dybcio@linaro.org>
Precedence: bulk

This short series brings a couple of fixes and features
(such as display out) for the QTI RB2 board. Similar patches
for the RB1 should be expected soon.

Depends on and based atop (in order):

20230505075354.1634547-1-bhupesh.sharma@linaro.org
20230502053534.1240553-1-bhupesh.sharma@linaro.org
20230505064039.1630025-1-bhupesh.sharma@linaro.org

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
Konrad Dybcio (5):
      arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
      arm64: dts: qcom: qrb4210-rb2: Enable display out
      arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
      arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
      arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller

 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 223 ++++++++++++++++++++++++++++++-
 1 file changed, 220 insertions(+), 3 deletions(-)
---
base-commit: c768c054f1a722d4b973ddab81ee580b7e24a891
change-id: 20230515-topic-rb2-bits-22e685b4f48d

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@linaro.org>